www.panduit.com

Category 5e/Class D

Exceeds channel and component requirements of ANSI/TIA-568-C.2

channel and

Category 5e and ISO11801 Class D standards at swept frequencies

component performance: 1 to 100 MHz

Electrical/mechanical

Meets all ODVA Ethernet/IP electrical and mechanical

performance:

performance requirements

Environmental

Protects and seals connections against dust and water

protection:

immersion to ANSI/IEC 60529-2004

Vibration, temperature and chemical resistant; shielded version further

enhances electromagnetic performance

FCC and

Meets ANSI/TIA-1096-A; contacts plated with 50 microinches

ANSI/TIA compliance:

of gold for superior performance

IEC compliance:

Plug meets IEC 60603-7 specifications

IP compliance:

Rated IP67 for dust protection and temporary liquid immersion

NEMA/UL compliance:

Rated UL Type 12 to provide protection against circulating dust,

falling dirt, and dripping noncorrosive liquids

Packaging:

Connector and plug include protective cap

RoHS compliancy status: Compliant

PoE compliance:

Meets IEEE 802.3af and IEEE 802.3at for PoE applications

Conductor

Wire cap compatible with 24 – 26 AWG solid or stranded cable with conductor insulation

termination range:

diameters of 0.035 to 0.040 in. and overall cable O.D. 0.205 in. to 0.250 in.

key features and benefits

applications

technical information

specifications

8-position, industrial connectors shall be applicable for use in manufacturing

environments and shall meet/exceed the ANSI/TIA-568-C.2 standard for Category

5e performance requirements. Bulkhead RJ45 jack and plug shall incorporate an

IP67 rated seal and shall be designed to provide protection from dust and

temporary immersion in water typically found in harsh industrial environments.

Tethered protective cap shall ensure IP67 protection of the connector and plug in

the unmated condition. Secondary seals on both the connector and plug shall

provide an additional environmental barrier. Termination to a 4-pair 24 AWG 100

ohm twisted pair cable shall not require the use of a punchdown tool. AN IP67

rating shall be achieved when mated with an IP67 and NEMA UL Type 12

industrial grade, bayonet style patch cord.

Bulkhead anti-rotation washer

Eliminates the potential for module rotation

Connector mounting nut

Holds bulkhead safely and securely from inside of enclosure

Robust construction

Plug contact plated with 50 microinches of gold

Bayonet style interface

Provides positive reinforcement during mated condition; rated to

100 mating cycles

Protective cap

Maintains IP67 seal during unmated connection

Utilizes patented Giga-TX™

Optimizes performance by reducing conductor untwist to

Technology

less than 1/8"

Forward motion termination

Speeds installation and places no impact on critical components

for maximum reliability

Industry standard RJ45 interface

Familiar to end users

No punchdown tool required

Can terminate with standard adjustable slipjaw pliers or optional

termination tool (EGJT)

Universal wiring scheme

Termination cap is color coded for T568A and T568B

wiring schemes

Standard mounting

Bulkhead connector fits into optional faceplate as well as

standard IEC 1-13/64" (30.5mm) diameter mounting hole

IndustrialNet™ TX5e™ Connectors provide an ideal solution

to support Industrial Ethernet from the Local Area Network

(LAN) based support offices to the processing devices on the

plant floor. The Bulkhead RJ45 Industrial Ethernet Connector

is a key component to an overall Industrial Ethernet

application. In most designs, the bulkhead connector will be

the interface that protects the integrity of the Ethernet data

transfer from the switch, and PLC out to the devices or up to

the horizontal plant backbone. Typical work cells requiring the

IP67 protection, where wash down is needed. This is

common in the food and beverage industry where bacterial

contamination is present. The bulkhead connector also offers

high temperature resilience, namely 85°C storage and 70°C

operating. In manufacturing facilities such as metal

processing, welding, and chemical batch processing, high

temperatures are normal. Vibration is also a concern, as in

automotive panel stamping plants and work cells. The

IndustrialNet™ TX5e™ Connectors protect the RJ45 mating

even in the most severe vibration applications.

IndustrialNet™ TX5e™ Connectors

SPECIFICA TION SHEET

IndustrialNet™ TX5e™ Connectors

UTP:

IAEBH5E

Shielded:

IAEBH5ES

Coupler module: IAEBHC5E

IndustrialNet™ TX5e™ Modular Plugs

UTP:

MPI588T

Shielded:

MPSI588T

IndustrialNet™ TX5e™

Patch Cords

UTP with caps:

IUTPCH3BL*Y

UTP without

caps:

IUTPCHNC3BL*Y

STP with caps:

ISTPCH1MBL**Y

STP without

caps:

ISTPCHNC1MBL**Y

IndustrialNet™ Stainless

Steel Faceplates

Single gang:

IAEFP1

Double gang:

IAEFP2-2G

Tools and Accessories

Empty

bulkhead:

IAEBH

Termination:

tool (optional):

EGJT

Wire snipping

tool:

CWST

Wire stripping

tool:

CJAST

*For lengths 5, 7, 10, 15, or 20 feet, change

the length designation in the part number to

the desired length. For example, the part

number for a 7-foot, UTP patch cord

is IUTPCH7BLY.

**For lengths 2, 3 or 5 meters, change the

length designation in the part number to the

desired length. For example, the part number

for a 5-meter, shielded patch cord

is ISTPCH5MBLY.