6

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

7. Insert the plastic end caps (G) into

the end of each corner post (A).

We recommend that the racking be secured to an adjacent wall using typical

wall insert plugs and screws (not supplied) aligned with the assembly slots in

the corner posts.

The two units can be used as free-standing shelves either individually or

together, also standing either in-line or at right angles.

GENERAL SAFETY RULES

1. Always maintain equipment in good condition for the best/safest

performance.

2. Never exceed the maximum load for these shelving units as stated in the

specification.

3. Never use these units if they are damaged.

4. Always load small, stable items on the top shelves, heavier and bulky items

should be stored on the lower shelves.

5. Always distribute heavy loads evenly across the shelves.

Please keep these instructions in a safe place for future reference.