This aluminized moisture barrier bag is designed to provide packaging for ESD

and moisture sensitive items, both inside and outside an ESD protected area.

The bags are heat sealable and suitable for vacuum packaging. Bags are

printed with ESD and moisture warning symbols and a lot code for traceability.

SCS Moisture Barrier Bags Dri-Shield® 2000 are manufactured from a

laminate of multiple layers of aluminized polyester and polyethylene. Polyester

provides puncture resistance. Metal layers are intended to provide shielding of

Electrostatic Discharge (ESD) and to help minimize the penetration of electric

field while providing moisture protection.

DRAWING

NUMBER

Dri-Shield® 2000

DATE

October

2017

© 2017 DESCO INDUSTRIES INC.

Employee Owned

DRI-SHIELD® 2000 MOISTURE BARRIER BAG

926 JR Industrial Drive, Sanford, NC 27332

WEB SITE: StaticControl.com

PHONE (919) 718-0000

Moisture Barrier Bag Dri-Shield® 2000

Specifications and procedures subject to change without notice.

Bag is free of amines, silicones and heavy metals.

This product is intended for commercial use only. This product is not on the Qualified Product

Listing under the Defense Standardization Program.

Open Top Bag

ZipTop Bag

Tolerance (inches): Width -0, +0.250 Length +/- 0.125 Offset O to 0.250

Seal width +/- 0.125

Meets ANSI/ESD S20.20, Packaging standard ANSI/ESD S541, and Static Control Bag

ANSI/ESD S11.4 Level 3 (except Transparency)

Physical

Typical Value

Testing Method

Moisture Vapor

Transmission Rate

(MVTR)

<0.035 grams/100 sq. in./24 hrs MIL-STD-3010C Method 3030

Tensile Strength

7800 PSI, 54 MPa

ASTM D882

Puncture Resistance

20 lbs, 89 N

MIL-STD-3010 Method 2065

Seal Strength

15 lbs, 66 N

ASTM D882

Thickness

3.6 mils, 0.0914 mm ±10%

MIL-STD-3010 Method 1003

Marking Adhesion

Pass

IPC-TM-650 2.4.1

Electrical

Typical Value

Testing Method

ESD Shielding

<10 nJ

ANSI/ESD STM11.31

Surface Resistance -

Interior

1 x 104 to < 1 x 1011 ohms

ANSI/ESD STM11.11

Surface Resistance -

Exterior

1 x 104 to < 1 x 1011 ohms

ANSI/ESD STM11.11

EMI Attenuation

45 dB

1 to 10 GHz

Cleanliness

Typical Value

Testing Method

Silicone

Not Detected

FTIR

Heat Sealing Conditions Typical Value

Temperature

300°F - 400°F, 140°C - 204°C

Time

0.6 – 4.5 seconds

Pressure

30 – 70 PSI, 206 – 482 KPa

Tolerance: Width -0, +1/4"

Length ± 1/8" Offset 0 to 1/4"

Seal width 3/8" with a tolerance of ± 1/8"

Note: Standard bag markings shown

above are not to scale.

NOTE: The complete dry package concept of packaging for electronics requires three elements:

Moisture Barrier Bags - To Protect

Desiccants - To Absorb Moisture

Humidity Indicator Cards - To Monitor Performance

SCS Moisture Barrier Bags are packaged in a polyethylene bag.

Made in the

United States of America

RoHS 3, REACH, and Conflict Minerals Statement

None of the RoHS 3 restricted materials or REACH substances of very high concern as

of 2017/07/07, or Conflict Minerals are intentionally added in manufacturing this product.

Ref: European Union Directive 2011/65/EU and Regulation (EC) No. 1907/2006/CE.

See SCS Warranty, Limitation of Liability and Remedies