SN74HCS365 Hex Buffers and Line Drivers with 3-State Outputs and Schmitt-Trigger

Inputs

1 Features

• Wide operating voltage range: 2 V to 6 V

• Schmitt-trigger inputs allow for slow or noisy input

signals

• Low power consumption

– Typical ICC of 100 nA

– Typical input leakage current of ±100 nA

• ±7.8-mA output drive at 6 V

• Extended ambient temperature range: –40°C to

+125°C, TA

2 Applications

• Enable or Disable a Digital Signal

• Eliminate Slow or Noisy Input Signals

• Hold a Signal During Controller Reset

• Debounce a Switch

3 Description

The SN74HCS365 contains six independent buffers

with Schmitt-trigger inputs and 3-state outputs. All

channels are placed into the high-impedance mode

when either of the output enable (OE) pins are set to

the high state.

Device Information

PART NUMBER

PACKAGE(1)

BODY SIZE (NOM)

SN74HCS365PW

TSSOP (16)

5.00 mm x 4.40 mm

SN74HCS365D

SOIC (16)

9.90 mm x 3.90 mm

Input Voltage

Schmitt-trigger

CMOS Input

Response

Waveforms

Standard

CMOS Input

Response

Waveforms

Input Voltage

Input Voltage

Time

Time

Input Voltage

Waveforms

Low Power

Noise Rejection

Supports Slow Inputs

Time

Time

Time

Time

Benefits of Schmitt-trigger inputs

www.ti.com

SN74HCS365

SCLS837 – SEPTEMBER 2020

Copyright © 2020 Texas Instruments Incorporated

Submit Document Feedback

1

Product Folder Links: SN74HCS365

SN74HCS365

SCLS837 – SEPTEMBER 2020

An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,

intellectual property matters and other important disclaimers. PRODUCTION DATA.