GP2A200LCS0F Series

1

Sheet No.: D3-A05101EN

Date Jun. 30. 2005

© SHARP Corporation

Notice The content of data sheet is subject to change without prior notice.

In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP

devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.

GP2A200LCS0F

Series

Detecting Distance : 2 to 22mm

*OPIC Output,

Reflective Photointerrupter with

Connector

■ Description

GP2A200LCS0F Series are OPIC output, reflective

photointerrupters with emitter and detector facing the

same direction in a molding that provides non-contact

sensing. This family of devices uses light modulation to

reduce the affects of disturbing light, and the sensor is

optimized to work in the selected focal distance. A 3-pin

connector is included to allow remote-mount or off-board

designs.

■ Features

1. Reflective with OPIC Light Modulated Output

2. Highlights :

• Includes additional screw fixing holes

• Position pin to prevent mis-alignment

• Long focal distance

3. Key Parameters :

• Detecting distance : 2 to 22mm (White paper)

5 to 15mm (Black paper)

• Undetecting distance : over 90mm (White paper)

• Connector : GP2A200LCS0F ; Tyco Electronics AMP K.K.

(PN : 292133-3)

GP2A200LCSCF ; Tyco Electronics AMP K.K.

(PN : 292133-3)

GP2A240LCS0F ; Tyco Electronics AMP K.K.

(PN : 292133-3)

GP2A210LCSJF ; Tyco Electronics AMP K.K.

(PN : 4-292133-3)

4. Lead free and RoHS directive compliant

■ Agency approvals/Compliance

1. Compliant with RoHS directive

■ Applications

1. General purpose detection of paper presence or mo-

tion.

2. Example: PPC, FAX, Printer

* "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal-

processing