NO.

PQ11-01ER

Product Specification and Approval Sheet Version 1

Page 4/5

Designed and manufactured by Fuzetec Technology Co., Ltd., offered by RFE International, Inc.

NOTE: Specification subject to change without notice.

2021/03/25

F200L

075L

60

7. Material Specification

Terminal pad material: Pure Tin

Soldering characteristics: Meets EIA specification RS 186-9E, ANSI/J-std-002 Category 3

8. Part Numbering and Marking System

Part Numbering System

Part Marking System

F S M D □ □ □ – □ □ – 2920 R (– R)

Warning: - Each product should be carefully evaluated and tested for their suitability of application.

- Operation beyond the specified maximum rating or improper use may result in damage and possible electrical arcing and/or flame.

- PPTC device are intended for occasional overcurrent protection. Application for repeated overcurrent condition and/or prolonged

trip are not anticipated.

- Avoid contact of PPTC device with chemical solvent, including some inert material such as silicone based oil, lubricant and etc.

Prolonged contact will damage the device performance.

- Additional protection mechanism are strongly recommended to be used in conjunction with the PPTC device for protection against

abnormal or failure conditions.

- Avoid use of PPTC device in a constrained space such as potting material, housing and containers where have limited space to

accommodate device thermal expansion and/or contraction.

F

□ □ □

L

Current Rating

Voltage Rating

Fuzetec Logo

F

□ □ □

L

□ □

Part Identification

Example

F

Example

Part Identification

Fuzetec Logo