7 / 16

Specifications are subject to changes without notice.

All specifications are typical at 25

C unless otherwise stated.

760W Programmable Driver with INV Digital Dimming

SSM-760SxxxMGS

Rev.A

www.inventronics-co.com

Tel: 86-571-56565800

Fax: 86-571-86601139

sales@inventronics-co.com

Power Factor

Total Harmonic Distortion

Hot-plugging Protection

This feature protects LEDs when connecting to a driver that is already powered on. This is disabled by default

and can be enabled through the Inventronics Programing Software.

LED threshold voltage (Vth) is the minimum voltage required for

current to flow through the LED load. After this threshold is met, the

LED forward voltage (Vf) increases as the current increases.

Set Vth close to, but higher than the actual LED threshold voltage for

optimized performance. The greater the difference between the Vth

setting and the actual LED threshold voltage, the higher the overshoot

current will be. The Vth setting must be lower than Vf.

Please test, program, and tune this feature for each LED load design.