UR132-22-AF5-3-R datasheet(4/4 Pages) UTC

4 / 4 page

UR132

LINEAR INTEGRATED CIRCUIT

UNISONICTECHNOLOGIESCO.,LTD

4 of 4

www.unisonic.com.tw

QW-R102-007,G

TYPICAL APPLICATION CIRCUIT

UTC

UR132

VOUT

VIN

VOUT

VIN

10μF

COUT

1μF

CIN

GND

The part may oscillate without the capacitor, a 10

µF (or larger) capacitor is recommended between VOUT and GND

for stability. Any type of capacitor can be used, but not Aluminum electrolytic when operating below -20

°C. The

capacitance may be increased without limit. Besides, another 1

µF capacitor (or larger) should be placed between VIN

to GND.

UR132 ADJUSTABLE

UTC

UR132

VREF

10uF

1uF

VOUT

VIN

10uF

Cr:10uF to improve ripple rejection

VOUT=VREF(1+R2/R1)+IADJ*R2

IADJ

VIN

VOUT

ADJ

UTC assumes no responsibility for equipment failures that result from using products at values that

exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or

other parameters) listed in products specifications of any and all UTC products described or contained

herein. UTC products are not designed for use in life support appliances, devices or systems where

malfunction of these products can be reasonably expected to result in personal injury. Reproduction in

whole or in part is prohibited without the prior written consent of the copyright owner. The information

presented in this document does not form part of any quotation or contract, is believed to be accurate

and reliable and may be changed without notice.

UR132-22-AF5-3-R Fiches technique(PDF) 4 Page - Unisonic Technologies

UR132-22-AF5-3-R Fiches technique(HTML) 4 Page - Unisonic Technologies

Html Pages

1 2 3 4

Fiches technique Télécharger

Lien URL