8563 datasheet(11/23 Pages) PHOENIX

11 / 23 page

AXL E S3 DI8 DO4 2A M12 6P

8563_en_04

PHOENIX CONTACT

Configuration via rotary encoding switch

You can configure the address assignment and other func-

tions using rotary encoding switches.

After modifying the switch position, restart the device, as the

modification to the switch position does not take effect dur-

ing operation.

Figure 8

Rotary encoding switch

The code results from the sum of S1 x 10 plus S2 x 1. The

image shows the code and therefore Sercos address 77

(7 x 10 + 7).

9.1

Manual address assignment

Switch position 01 ... 159

The devices are automatically assigned addresses by the

Sercos master via remote address assignment as standard.

Set the Sercos address manually with this switch position.

Remote address assignment, e.g., via an engineering tool,

is deactivated.

9.2

Resetting to the default settings

Switch position 0F

All settings are reset to the delivery state.

9.3

Reserved/invalid switch position

The device starts with the previous settings, e.g., with the

settings that were valid before the device was restarted.

Code

Function

Remote address assignment

(Default)

0 ... 15

0 ... 09

01 ... 159

Manual address assignment

Resetting to the default

settings

Other

Reserved

E F

x10

The device is ready for operation after power-

ing up, as soon as the RDY LED lights up

green.

A connection to the device however cannot be

established in this switch position.

As soon as the RDY LED lights up green, a

new switch position can be selected on the ro-

tary encoding switch and the device can be

restarted.

8563 Fiches technique(PDF) 11 Page - PHOENIX CONTACT

8563 Fiches technique(HTML) 11 Page - PHOENIX CONTACT

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Fiches technique Télécharger

Lien URL