| Moteur de recherche de fiches techniques de composants électroniques |
|
P1100-3-RV revendeur |
| revendeur | No de pièce | Fabricant | Description | Price | Qty. BuyNow | |
![]() Avnet Americas | CLP-110-02-F-D-BE-P-TR | Samtec Inc | - Tape and Reel (Alt: CLP-110-02-F-D-BE-P-TR) RoHS : Compliant |
| 9,600 | |
| TLMP1100-GS15 | Vishay Intertechnologies | LED Single Chip Pure Green 561nm 30mA 2-Pin SMD T/R - Tape and Reel (Alt: TLMP1100-GS15) RoHS : Compliant |
| 5,000 | ||
| RCWP110016R5FKTN | Vishay Intertechnologies | RCWP-1100 16.5 1% K R78 - Tape and Reel (Alt: RCWP110016R5FKTN) RoHS : Not Compliant |
| 4,000 | ||
| RCWP11006K19FKS3 | Vishay Intertechnologies | - Tape and Reel (Alt: RCWP11006K19FKS3) RoHS : Not Compliant |
| 4,000 | ||
| CLP-110-02-L-D-TR | Samtec Inc | PCB Receptacle, Board-to-Board, 1.27 mm, 2 Rows, 20 Contacts, Solder, CLP Series, Phosphor Bronze - Tape and Reel (Alt: CLP-110-02-L-D-TR) RoHS : Compliant |
| 2,400 | ||
| RCWP11003R90GMS6 | Vishay Intertechnologies | - Tape and Reel (Alt: RCWP11003R90GMS6) RoHS : Not Compliant |
| 1,200 | ||
| CLP-110-02-S-D-K-TR | Samtec Inc | - Tape and Reel (Alt: CLP-110-02-S-D-K-TR) RoHS : Compliant |
| 1,200 | ||
| CLP-110-02-L-D-K-TR | Samtec Inc | PCB Receptacle, Board-to-Board, 1.27 mm, 2 Rows, 20 Contacts, Solder, CLP Series, Phosphor Bronze - Tape and Reel (Alt: CLP-110-02-L-D-K-TR) RoHS : Compliant |
| 1,200 | ||
| CLP-110-02-F-D-A-P | Samtec Inc | - Rail/Tube (Alt: CLP-110-02-F-D-A-P) RoHS : Compliant |
| 454 | ||
| CLP-110-02-F-D-A | Samtec Inc | - Rail/Tube (Alt: CLP-110-02-F-D-A) RoHS : Compliant |
| 115 | ||
| EVALXDPP1100Q024DBTOBO1 | Infineon Technologies AG | EVALXDPP1100Q024DBTOBO1 - Boxed Product (Development Kits) (Alt: EVALXDPP1100Q024DBTOBO1) RoHS : Not Compliant |
| 1 | ||
| 3339P-1-100 | Bourns Inc | - Rail/Tube (Alt: 3339P-1-100) RoHS : Not Compliant |
| 0 | ||
| 3362P-1-100 | Bourns Inc | - Rail/Tube (Alt: 3362P-1-100) RoHS : Not Compliant |
| 0 | ||
| RCWP11000000ZSEC99 | Vishay Intertechnologies | Res Thick Film Jumper 1100 0Ohm 1/2W Molded T/R - Tape and Reel (Alt: RCWP11000000ZSEC99) RoHS : Compliant |
| 0 | ||
| RCWP1100100RFMET | Vishay Intertechnologies | RCWP-1100 100 1% M ET e3 - Waffle Pack (Alt: RCWP1100100RFMET) RoHS : Compliant |
| 0 | ||
![]() Newark | MFP1-100R JI | TT Electronics Welwyn Components | Through Hole Metal Film Resistor, Mfp Se; |Tt Electronics/welwyn MFP1-100R JI RoHS : Compliant |
| 13,264 | |
| CLP-110-02-L-D-BE-K-TR | Samtec Inc | Socket, 1.27Mm, Vertical Smt, 20Way; |Samtec, Inc. CLP-110-02-L-D-BE-K-TR RoHS : Compliant |
| 12,079 | ||
| MFP1-100K JI | TT Electronics Welwyn Components | Res, 100K, 5%, 1W, Axial, Metal Film; |Tt Electronics/welwyn MFP1-100K JI RoHS : Compliant |
| 5,451 | ||
| CLP-110-02-F-D-K-TR | Samtec Inc | Socket, 1.27Mm, Vertical Smt, 20Way; |Samtec, Inc. CLP-110-02-F-D-K-TR RoHS : Compliant |
| 657 | ||
| 3006P-1-100LF | Bourns Inc | Trimmer, Multi Turn, Cermet, Side Adjust; |Bourns, Inc. 3006P-1-100LF RoHS : Compliant |
| 300 | ||
| 3006P-1-100LF | Bourns Inc | Trimmer, 15 Turn 10R; |Bourns, Inc. 3006P-1-100LF RoHS : Compliant |
| 254 | ||
| ARMMP-1100 | L-com Inc | Rf/Coaxial Connector, mmcx Rp Coaxial; |L-Com ARMMP-1100 RoHS : Compliant |
| 203 | ||
| GLP1-100-D-54 | Bivar Inc | Light Pipe, 1Pipe, 0.1", Press Fit/Panel; Length:0.1"; No. Of Light Pipes:1Pipes; Light Pipe Shape:Circular With Domed Top; Light Pipe Mounting:Press Fit, Panel; Light Pipe Colour:Transparent; Product Range:Glp1 Series Rohs Compliant: Yes RoHS : Compliant |
| 100 | ||
| GLP1-100-F-54 | Bivar Inc | Light Pipe, 1Pipe, 0.1", Press Fit/Panel; Length:0.1"; No. Of Light Pipes:1Pipes; Light Pipe Shape:Circular With Flat Top; Light Pipe Mounting:Press Fit, Panel; Light Pipe Colour:Transparent; Product Range:Glp1 Series Rohs Compliant: Yes RoHS : Compliant |
| 100 | ||
| CLP-110-02-F-D-A-K-TR | Samtec Inc | Btb Conn, Rcpt, 20Pos, 2Row, 1.27Mm; Con |Samtec, Inc. CLP-110-02-F-D-A-K-TR RoHS : Compliant |
| 50 | ||
| CLP-110-02-G-D-P-TR | Samtec Inc | Low Profile Dual-Wipe Sock,.050 Pitch; |Samtec, Inc. CLP-110-02-G-D-P-TR RoHS : Compliant |
| 44 | ||
| ASMBP-1100 | L-com Inc | Rf/Coaxial Connector, Smb Coaxial; |L-Com ASMBP-1100 RoHS : Compliant |
| 20 | ||
| CLP-110-02-G-D-K-TR | Samtec Inc | Socket, 1.27Mm, Vertical Smt, 20Way; |Samtec, Inc. CLP-110-02-G-D-K-TR RoHS : Compliant |
| 20 | ||
| FMMP1100 | Fairview Microwave Inc | Matching Pad 50 Ohm Bnc Male To 75 Ohm B; |Fairview Microwave FMMP1100 RoHS : Not Compliant |
| 1 | ||
| P1100 | nVent Hoffman | Plinth Front Rear 100X1000; |Nvent Hoffman P1100 RoHS : Compliant |
| 0 | ||
![]() RS | 3006P-1-100LF | Bourns Inc | TRIMMER, CERMET, REST 10 OHMS, PCB,15 TURNS, PWR 0.75W, DIM 0.75INLX0.19INWX0.25INH RoHS : Compliant |
| 185 | |
| RCP11003115/120VAC | Carlo Gavazzi Holding AG | 3PDT SOCKET MOUNT RELAY PLUG IN 10 A 115 - 120V AC |
| 44 | ||
| RCP11003230VAC | Carlo Gavazzi Holding AG | RELAY, 3PDT, 230VAC, 10A, LED, 11 PIN OCTAL PLUG-IN |
| 13 | ||
| RCP1100324VAC | Carlo Gavazzi Holding AG | 3PDT SOCKET MOUNT OCTAL RELAY PLUG IN, 10 A, 24V AC |
| 9 | ||
| N27P 1100U0 | Sifam Tinsley Precision Instrumentation Ltd | N27P 1-PHASE NETWORK POWER METER, DIN RAIL MT., 1/5A AC, 2 RELAY OUT. |
| 5 | ||
| STBXMP1100 | Schneider Electric | TERMINATION PLATE - SPARE RoHS : Compliant |
| 3 | ||
| RCP1100324VDC | Carlo Gavazzi Holding AG | RELAY, 3PDT, 24VDC, 10A, LED, 11 PIN OCTAL PLUG-IN |
| 2 | ||
| KD S-M12-5A-P1-100 (50133861) | Leuze electronic GmbH + Co KG | SINGLE ENDED CORDSET, M12 FEMALE TO PIGTAIL, 10 M, PUR, 5 COND, KD SERIES |
| 2 | ||
| WP1100C | Intermatic | COVER, WEATHERPROOF, SGL, VERT/H |
| 1 | ||
| 01EBCP1100GRAT (COP.01EBCP1100GRAT) | SKF Cooper | COOPER PILLOW BLOCK, BORE DIA. 11 IN |
| 0 | ||
| 02EBCP1100EXAT (COP.02EBCP1100EXAT) | SKF Cooper | COOPER PILLOW BLOCK, BORE DIA. 11 IN |
| 0 | ||
| 03EBCP1100GRAT (COP.03EBCP1100GRAT) | SKF Cooper | COOPER PILLOW BLOCK, BORE DIA. 11 IN |
| 0 | ||
| 01EBCP1100EXAT (COP.01EBCP1100EXAT) | SKF Cooper | COOPER PILLOW BLOCK, BORE DIA. 11 IN |
| 0 | ||
| 02EBCP1100GRAT (COP.02EBCP1100GRAT) | SKF Cooper | COOPER PILLOW BLOCK, BORE DIA. 11 IN |
| 0 | ||
| 03EBCP1100EXAT (COP.03EBCP1100EXAT) | SKF Cooper | COOPER PILLOW BLOCK, BORE DIA. 11 IN |
| 0 | ||
![]() Bisco Industries | TP-110-02-2-T | Components Corporation | 12,000 | |||
| PLP1-100-FD | Bivar Inc | 5,000 | ||||
| MP-1100-06-DS-4X9 | Sullins Connector Solutions | 2,800 | ||||
| P1100-9 | Electro-Term/Hollingsworth | 1,000 | ||||
| PLP1-100-F | Bivar Inc | RoHS : Compliant | 83 | |||
| SLP-1-100-413-01 | Essentra Components | 45 | ||||
| SLP-1-100-307-01 | Essentra Components | 37 | ||||
| SP1-10-01 | Essentra Components | 4 | ||||
![]() Rochester Electronics | NX5P1100UKZ | NXP Semiconductors | Logic Controlled High-Side Power Switch RoHS : Not Compliant |
| 12,407 | |
| SNP1100SAT3G | onsemi | THY SPCL SMB RoHS : Compliant |
| 4,708 | ||
| XDPP1100Q040XUMA1 | Infineon Technologies AG | Power Supply Digital Power Controller 40-QFN T/R RoHS : Compliant |
| 9,527 | ||
| TSP50P11007CNL | Texas Instruments | SPEECH CMOS TSP50P11C RoHS : Not Compliant |
| 1,763 | ||
![]() Sager | CLP-110-02-G-D-P-TR | Samtec Inc | Headers & Wire Housings Low Profile Dual-Wipe Socket, .050 Pitch RoHS : Compliant |
| 1,923 | |
| RF058-06SP2-01SP1-1000 | Samtec Inc | RF Cable Assemblies 50 Ohm RF Cable Assembly, RG 58 Cable RoHS : Compliant |
| 0 | ||
| RF174-01RP1-02RP1-1000 | Samtec Inc | RF Cable Assemblies RoHS : Compliant | 0 | |||
| RF178-04SP3-03SP1-1000 | Samtec Inc | RF Cable Assemblies 50 Ohm RF Cable Assembly, RG 178 Cable RoHS : Compliant | 0 | |||
| RF316-07BJ1-07SP1-1000 | Samtec Inc | RF Cable Assemblies RoHS : Compliant | 0 | |||
| CLP-110-02-G-D-BE-A-P-TR | Samtec Inc | Headers & Wire Housings Low Profile Dual-Wipe Socket, .050 Pitch RoHS : Compliant |
| 0 | ||
| CLP-110-02-L-DH-A-TR | Samtec Inc | Headers & Wire Housings Low Profile Dual-Wipe Socket, .050 Pitch RoHS : Compliant |
| 0 | ||
| CLP-110-02-LM-D-P-TR | Samtec Inc | Headers & Wire Housings Low Profile Dual-Wipe Socket, .050 Pitch RoHS : Compliant |
| 0 | ||
| CLP-110-02-LTL-D-BE-K-FR | Samtec Inc | Headers & Wire Housings RoHS : Not Compliant | 0 | |||
| CLP-110-02-S-D-K | Samtec Inc | Headers & Wire Housings Low Profile Dual-Wipe Socket, .050 Pitch RoHS : Compliant |
| 0 | ||
| CLP-110-02-SM-D-A-FR | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MYRGP110060W21RC | Murata Power Solutions | Non-Isolated DC/DC Converters |
| 0 | ||
| RF174-02RP1-01SP1-1000 | Samtec Inc | RF Cable Assemblies 50 Ohm RF Cable Assembly, RG 174 Cable RoHS : Compliant | 0 | |||
| YHVP1100-1P-90-A-0 | TE Connectivity | Automotive Connectors HVP1100-1phi XE,90,Key A KIT RoHS : Compliant |
| 0 | ||
| RF058-06SP3-01SP1-1000 | Samtec Inc | RF Cable Assemblies RoHS : Compliant | 0 | |||
![]() TME | TS-K-01P-11-00Z(H) | Degson Electronics Co Ltd | Splice terminal: rail |
| 3,895 | |
| WFA6-01P-11-00Z(H) | Degson Electronics Co Ltd | Splice terminal: rail |
| 200 | ||
| WS2.5-DB-01P-11-00Z(H) | Degson Electronics Co Ltd | Splice terminal: rail; 24A; 800V; for DIN rail mounting; grey |
| 150 | ||
| WS4-DB-01P-11-00Z(H) | Degson Electronics Co Ltd | Splice terminal: rail |
| 100 | ||
| WFA16-01P-11-00Z(H) | Degson Electronics Co Ltd | Splice terminal: rail |
| 100 | ||
| WFC2.5-8-01P-11-00Z(H) | Degson Electronics Co Ltd | Splice terminal: rail |
| 100 | ||
| WS4-SD-01P-11-00Z(H) | Degson Electronics Co Ltd | Splice terminal: rail |
| 56 | ||
| WS1.5T-DB-01P-11-00Z(H) | Degson Electronics Co Ltd | Splice terminal: rail |
| 48 | ||
| WS6-SD-01P-11-00Z(H) | Degson Electronics Co Ltd | Splice terminal: rail; 41A; 800V; for DIN rail mounting; grey |
| 30 | ||
| WS16-TW-01P-11-00Z(H) | Degson Electronics Co Ltd | Splice terminal: rail; 76A; 800V; for DIN rail mounting; grey |
| 20 | ||
| WS16-01P-11-00Z(H) | Degson Electronics Co Ltd | Splice terminal: rail; 76A; 800V; for DIN rail mounting; grey |
| 14 | ||
| WS1.5-SD-01P-11-00Z(H) | Degson Electronics Co Ltd | Splice terminal: rail; 18A; 800V; for DIN rail mounting; grey |
| 0 | ||
| WS2.5-TW-01P-11-00Z(H) | Degson Electronics Co Ltd | Splice terminal: rail; 24A; 800V; for DIN rail mounting; grey |
| 0 | ||
| WS1.5-DB-01P-11-00Z(H) | Degson Electronics Co Ltd | Splice terminal: rail; 17.5A; 800V; for DIN rail mounting; grey |
| 0 | ||
| WFA4-01P-11-00AH | Degson Electronics Co Ltd | Comb bridge; grey; ways: 2 |
| 0 | ||
![]() Ameya Holding Limited | CLP-110-02-F-D-P-TR | Samtec Inc | RoHS : Compliant | 800 | ||
![]() ComSIT USA | 4816P1100LF | Bourns Inc | THICK FILM SURFACE MOUNTED MEDIUM BODY RESISTOR Array/Network Resistor, Isolated, Metal Glaze/thick Film, 1.28W, 10ohm, 50V, 2% +/-Tol, 250ppm/Cel, Surface Mount, 2244 RoHS : Compliant | 2,404 | ||
![]() Interstate Connecting Components | MTFP1100C-PKG | Amphenol Fiber Systems International | INVALID CALLOUT DO NOT USE | 0 | ||
| YHVP1100-1P-90-A-0 | TE Connectivity | HVP1100-1PHI XE,90,KEY A RoHS : Compliant |
| 0 | ||
| U95T1P11001 | Amphenol FCi | 1X1 ULTRA PORT QSFP CAGE , HS, | 0 | |||
| U95T1P11001 | Amphenol High Speed Interconnects | 1X1 ULTRA PORT QSFP CAGE , HS, | 0 | |||
| U95L1P1100A | Amphenol High Speed Interconnects | 1X1 QSFP28 CAGE WITH HEAT SINK | 0 | |||
| U95L1P1100A | Amphenol FCi | 1X1 QSFP28 CAGE WITH HEAT SINK | 0 | |||
| YHVP1100-1P-90-B-0 | TE Connectivity | HVP1100-1PHI XE,90,KEY B RoHS : Compliant |
| 0 | ||
| SGRP-1-1000 | TE Connectivity | SGRP-1-1000 RoHS : Not Compliant | 0 | |||
| MTFP1100 | Amphenol Fiber Systems International | TFOCA II TERMINI, SM | 0 | |||
| U90A2P1100A | Amphenol FCi | 1X2 QSFP+ CAGE | 0 | |||
| U90A2P1100A | Amphenol High Speed Interconnects | 1X2 QSFP CAGE | 0 | |||
| U95L2P1100A | Amphenol High Speed Interconnects | 1X2 QSFP28 | 0 | |||
| U95L2P1100A | Amphenol FCi | 1X2 QSFP28 | 0 | |||
| OP1100000000G | Amphenol Anytek | OP - 5.0- 11P 12.5MM TIN-PLAT | 0 | |||
| MTFP1100C | Amphenol Fiber Systems International | TFOCA II TERMINI, SM W/CRIMP SLEEVE | 0 | |||
![]() PEI Genesis | KAP1100 | Daniels Manufacturing Corporation (DMC) |
| 0 | ||
| MTFP1100 | Amphenol Corporation |
| 0 | |||
![]() Rutronik | FP11001_LISA2-M-PIN | LEDIL | LENS+HOLDER FOR OSRAM OSLON SSL RoHS : Compliant |
| 115 | |
![]() Chip 1 Exchange | DG250-3.5-04P-11-00AH | Degson Electronics Co Ltd | INSTOCK | 46,911 | ||
| PCDK2.5-01P-11-00AH | Degson Electronics Co Ltd | INSTOCK | 38,379 | |||
| D-PC2.5-01P-11-00AH | Degson Electronics Co Ltd | INSTOCK | 25,062 | |||
| DG245H2-5.0-08P-11-00AH | Degson Electronics Co Ltd | INSTOCK | 10,384 | |||
| E-WS-01P-11-00AH | Degson Electronics Co Ltd | INSTOCK | 9,465 | |||
| DG127-5.0-03P-11-00AH | Degson Electronics Co Ltd | INSTOCK | 8,580 | |||
| DS10-01P-11-00AH | Degson Electronics Co Ltd | INSTOCK | 5,703 | |||
| D-DS4-TW-01P-11-00AH | Degson Electronics Co Ltd | INSTOCK | 3,394 | |||
| D-DS4-QU-01P-11-00AH | Degson Electronics Co Ltd | INSTOCK | 3,315 | |||
| 15EDGK-3.81-03P-11-00AH | Degson Electronics Co Ltd | INSTOCK | 3,276 | |||
| WS6-TW-01P-11-00AH | Degson Electronics Co Ltd | INSTOCK | 3,248 | |||
| DS6-TW-01P-11-00AH | Degson Electronics Co Ltd | INSTOCK | 3,230 | |||
| DG245-5.0-06P-11-00AH | Degson Electronics Co Ltd | INSTOCK | 2,626 | |||
| 2EDGK-5.08-03P-11-00AH | Degson Electronics Co Ltd | INSTOCK | 1,883 | |||
| DG250-3.5-08P-11-00AH | Degson Electronics Co Ltd | INSTOCK | 1,431 | |||
![]() Avnet Abacus | CLP-110-02-F-D-P-FR | Samtec Inc | (Alt: CLP-110-02-F-D-P-FR) RoHS : Compliant | 7,200 | ||
| CLP-110-02-L-D | Samtec Inc | PCB Receptacle BoardtoBoard 127 mm 2 Rows 20 Contacts Solder CLP Series Phosphor Bronze (Alt: CLP-110-02-L-D) RoHS : Compliant | 748 | |||
| CLP-110-02-F-D-P-TR | Samtec Inc | (Alt: CLP-110-02-F-D-P-TR) RoHS : Compliant | 622 | |||
| CLP-110-02-F-D-BE-K-TR | Samtec Inc | PCB Receptacle BoardtoBoard 127 mm 2 Rows 20 Contacts Solder CLP Series Phosphor Bronze (Alt: CLP-110-02-F-D-BE-K-TR) RoHS : Compliant | 326 | |||
| 637P11005C2T | CTS Corporation | - Tape and Reel (Alt: 637P11005C2T) RoHS : Compliant | 0 | |||
| 3296P-1-100LF | Bourns Inc | (Alt: 3296P-1-100LF) RoHS : Compliant | 0 | |||
| 3006P-1-100LF | Bourns Inc | Resistor Trimmer Cermet 10 Ohm 10 750 mW 15 Turn Multi Turn Through Hole (Alt: 3006P-1-100LF) RoHS : Compliant | 0 | |||
| 1410-P-11-00-0.50 | 3M | 20 Position SFP Plug to Plug 164 5000mm Black Shielded (Alt: 7100043583) RoHS : Compliant | 0 | |||
| YHVP1100-1P-90-A-0 | TE Connectivity | Connector Housing Sealed Plug 1Position Right Angle Cable Mount Carton (Alt: YHVP1100-1P-90-A-0) RoHS : Compliant | 0 | |||
| CLP-110-02-G-D-P-TR | Samtec Inc | PCB Receptacle BoardtoBoard 127 mm 2 Rows 20 Contacts Solder CLP Series Phosphor Bronze (Alt: CLP-110-02-G-D-P-TR) RoHS : Compliant | 0 | |||
| CLP-110-02-G-D-BE-A | Samtec Inc | (Alt: CLP-110-02-G-D-BE-A) RoHS : Compliant | 0 | |||
| CLP-110-02-L-D-K-FR | Samtec Inc | (Alt: CLP-110-02-L-D-K-FR) RoHS : Compliant | 0 | |||
| CLP-110-02-G-D-K-FR | Samtec Inc | (Alt: CLP-110-02-G-D-K-FR) RoHS : Compliant | 0 | |||
| CLP-110-02-L-DH-A-TR | Samtec Inc | (Alt: CLP-110-02-L-DH-A-TR) RoHS : Compliant | 0 | |||
| CLP-110-02-LM-D-P-TR | Samtec Inc | (Alt: CLP-110-02-LM-D-P-TR) RoHS : Compliant | 0 | |||
![]() Avnet Asia | DMP1100UCB4-7![]() | Diodes Incorporated | (Alt: DMP1100UCB4-7) RoHS : Compliant |
| 15,000 | |
| CLP-110-02-F-D-K-TR | Samtec Inc | (Alt: CLP-110-02-F-D-K-TR) RoHS : Compliant |
| 0 | ||
| CLP-110-02-F-D-A-P | Samtec Inc | (Alt: CLP-110-02-F-D-A-P) RoHS : Compliant | 0 | |||
| CLP-110-02-L-D-A-P-TR | Samtec Inc | (Alt: CLP-110-02-L-D-A-P-TR) RoHS : Compliant | 0 | |||
| CLP-110-02-F-D-A-P-TR | Samtec Inc | (Alt: CLP-110-02-F-D-A-P-TR) RoHS : Compliant | 0 | |||
| TLMP1100-GS15 | Vishay Intertechnologies | LED Single Chip Pure Green 561nm 30mA 2-Pin SMD T/R (Alt: TLMP1100-GS15) RoHS : Compliant | 0 | |||
![]() Avnet Silica | FP1100016 | Diodes Incorporated | (Alt: FP1100016) RoHS : Compliant | 0 | ||
DMP1100UCB4-7![]() | Diodes Incorporated | (Alt: DMP1100UCB4-7) RoHS : Compliant | 0 | |||
| FP11002_LISA2-W-PIN | LEDIL | LENS ROUND 1 POS 99MM OD 66MM H (Alt: FP11002_LISA2-W-PIN) RoHS : Compliant | 0 | |||
| FP11001_LISA2-M-PIN | LEDIL | LENS ROUND 1 POS 99MM OD 66MM H (Alt: FP11001_LISA2-M-PIN) RoHS : Compliant | 0 | |||
| FP11003_LISA2-WW-PIN | LEDIL | LENS ROUND 1 POS 99MM OD 66MM H (Alt: FP11003_LISA2-WW-PIN) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | RP110012 | Schrack Technik Gmbh | IN STOCK SHIP TODAY |
| 1,637 | |
| FKP1-100/2000/5-PCM15 | Wima | IN STOCK SHIP TODAY |
| 409 | ||
| P1100-HC-1.000KHZ | Pletronics Inc | IN STOCK SHIP TODAY | 300 | |||
| CLP-110-02-G-D-BE | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 180 | ||
| TP1-100 | Cooper Industries | IN STOCK SHIP TODAY |
| 109 | ||
| P1100-HC-30.000MHZ | Pletronics Inc | IN STOCK SHIP TODAY |
| 31 | ||
| CLP-110-02-F-D-P | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant | 30 | |||
P1100SC![]() | Littelfuse Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 20 | ||
| 225DH-1LP11-000 | ETRI | IN STOCK SHIP TODAY |
| 8 | ||
| P1100-32.4216MHZ | NAMHAN | IN STOCK SHIP TODAY |
| 5 | ||
| P1100-HC-20.000MHZ | Pletronics Inc | IN STOCK SHIP TODAY |
| 4 | ||
| 230DH-1LP11-000 | ETRI | IN STOCK SHIP TODAY |
| 4 | ||
| P1100-HC-32.000000MHZ | Pletronics Inc | IN STOCK SHIP TODAY |
| 3 | ||
| EFP110-015M-SCSC | Black Box Corporation | IN STOCK SHIP TODAY |
| 2 | ||
| TP1100A-4C | ZURN | IN STOCK SHIP TODAY | 1 | |||
![]() DB Roberts | DWP1100A | Essentra Components |
| 15 | ||
| KSLSP1-10-01 | Essentra Components | CB SptKeyslotNatural5/8 in Spc CB Support Keyslot Natural | 0 | |||
| BP1100A | Essentra Components | 1.004 DIA BARREL PLUGLDPE NATU | 0 | |||
| TLP-1100/NI | Sugatsune Kogyo Co Ltd | BAR FOR TLP, 1100MM | 0 | |||
| SP1-10-01 | Essentra Components | SpacerLockNatural5/8 in Spc Spacer Locking Natural | 0 | |||
| MBRP1-100-01 | Essentra Components | MINI BARB RIVT PIN,NAT,.100 IN | 0 | |||
![]() EBV Elektronik | FP11002_LISA2-W-PIN | LEDIL | LENS ROUND 1 POS 99MM OD 66MM H (Alt: FP11002_LISA2-W-PIN) RoHS : Compliant | 9,400 | ||
| FP11001_LISA2-M-PIN | LEDIL | LENS ROUND 1 POS 99MM OD 66MM H (Alt: FP11001_LISA2-M-PIN) RoHS : Compliant | 5,000 | |||
| TLMP1100-GS15 | Vishay Intertechnologies | LED Single Chip Pure Green 561nm 30mA 2Pin SMD TR (Alt: TLMP1100-GS15) RoHS : Compliant | 0 | |||
| XDPP1100Q024XUMA1 | Infineon Technologies AG | Digital Power Supply Controller 3V to 36V 24Pin VQFN TR (Alt: SP005404779) RoHS : Compliant | 0 | |||
| XDPP1100Q040XUMA1 | Infineon Technologies AG | (Alt: SP005404783) RoHS : Compliant | 0 | |||
| FP11003_LISA2-WW-PIN | LEDIL | LENS ROUND 1 POS 99MM OD 66MM H (Alt: FP11003_LISA2-WW-PIN) RoHS : Compliant | 0 | |||
![]() Master Electronics | 3339P-1-100 | Bourns Inc | Res Cermet Trimmer 10 Ohm 10% 0.5W(1/2W) 4(Elec)Turn (7.62 X 6.35mm) Pin Thru-Hole Tube RoHS : Not Compliant |
| 0 | |
| 3362P-1-100 | Bourns Inc | Res Cermet Trimmer 10 Ohm 10% 0.5W(1/2W) 1(Elec)/1(Mech)Turn 2.77mm (6.6 X 6.99 X 4.7mm) Pin Thru-Hole Tube RoHS : Not Compliant |
| 0 | ||
| RF058-06SP2-01SP1-1000 | Samtec Inc | 50 Ohm RF Cable Assembly RG 58 Cable RoHS : Compliant |
| 0 | ||
| CHP11001201G | TT Electronics Resistors | Cylindrical SMD Metal Glaze Resistor - 1.2 kOhm ±2% - 1W - ±100ppm/°C - 2512 - +150°C - AEC-Q200 RoHS : Compliant |
| 0 | ||
| CHP110043R0J | TT Electronics Resistors | Cylindrical SMD Metal Glaze Resistor - 43 Ohm ±5% - 1W - ±100ppm/°C - 2512 - +150°C - AEC-Q200 RoHS : Compliant |
| 0 | ||
| CLP-110-02-G-D-BE-A-P-TR | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
| CLP-110-02-G-D-P-TR | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
| CLP-110-02-H-D-BE-A-TR | Samtec Inc | RoHS : Compliant |
| 0 | ||
| CLP-110-02-L-DH-A-TR | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
| CLP-110-02-LM-D-P-TR | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
| CLP-110-02-S-D-K | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
| 3269P-1-100 | Bourns Inc | Res Cermet Trimmer 10 Ohm 10% 0.25W(1/4W) 12(Elec)Turn 1.78mm (6.35 X 8.39 X 5.21mm) Gull Wing SMD Tube RoHS : Not Compliant |
| 0 | ||
| 3292P-1-100 | Bourns Inc | Res Cermet Trimmer 10 Ohm 10% 0.5W(1/2W) 25(Elec)Turn 2.29mm (9.53 X 11.05 X 3.81mm) Pin Thru-Hole Tube RoHS : Not Compliant |
| 0 | ||
| 3296P-1-100LF | Bourns Inc | Res Cermet Trimmer 10 Ohm 10% 0.5W(1/2W) 25(Elec)Turn 2.19mm (9.53 X 11.55 X 4.83mm) Pin Thru-Hole Tube RoHS : Compliant |
| 0 | ||
| 1410-P-11-00-0.50 | 3M Interconnect | RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W06854-SP1-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: QN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. QN Male to Reverse Polarity SMA Female Bulkhead Cable 100 cm Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly QN male to reverse polarity SMA female bulkhead cable 100 cm length using LMR-195 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QN male to reverse polarity SMA female bulkhead cable 100 cm length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QN to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QN cable connection on one end and reverse polarity SMA bulkhead cable connection on the other. Our QN to reverse polarity SMA cable assemblies have a male gender on end 1 and female on end 2. This QN to reverse polarity SMA cable is a male to female coax assembly, PE3W06854-SP1-100CM, can also be known as a QN plug to reverse polarity SMA jack cable assembly and will be shipped same-day as it is purchased. QN plug to reverse polarity SMA jack cable assembly PE3W06854-SP1-100CM is built with LMR-195 which is a flexible coax type. The Pasternack flexible QN cable assembly is manufactured with QN to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency QN male to reverse polarity SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06854-SP1-100CM can also be used in the other direction and will be reverse polarity SMA female bulkhead to QN male cable assembly if the opposite connectivity is required. QN plug to SMA reverse polarity jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QN to SMA cable assembly for quick shipment worldwide. Variations of QN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QN male to reverse polarity SMA female bulkhead cable 100 cm length using LMR-195 coax with heatshrink. |
| 114 | |
| PE3W01725-SP1-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 75 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length: 39.37 inches. 75 Ohm BNC Female Bulkhead to 75 Ohm Push-On MCX Plug Right Angle Cable 100 cm Length Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm BNC female bulkhead to 75 Ohm push-on MCX plug right angle cable 100 cm length using 75 Ohm RG179 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC female bulkhead to 75 Ohm push-on MCX plug right angle cable 100 cm length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC bulkhead cable connection on one end and right angle MCX cable connection on the other. Our BNC to right angle MCX cable assemblies have a female gender on end 1 and plug on end 2. This BNC to MCX cable is a female to plug coax assembly, PE3W01725-SP1-100CM, can also be known as a BNC jack to right angle MCX male cable assembly and will be shipped same-day as it is purchased. BNC jack to MCX male cable assembly PE3W01725-SP1-100CM is built with RG179 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle MCX cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC female bulkhead to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01725-SP1-100CM can also be used in the other direction and will be right angle MCX plug to BNC female bulkhead cable assembly if the opposite connectivity is required. BNC jack bulkhead to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to MCX cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC female bulkhead to 75 Ohm push-on MCX plug right angle cable 100 cm length using 75 Ohm RG179 coax. |
| 114 | ||
| PE70MP1100 | Pasternack Enterprises | Key Specifications, Connector In Series: BNC, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: BNC, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm BNC Male to 75 Ohm BNC Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1100 from Pasternack has BNC connector in and is 50 Ohm, BNC connector out and is 75 Ohm. This coaxial BNC to BNC impedance matching pad has a male BNC in and a female BNC out. Our 50 Ohm BNC to 75 Ohm BNC impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm BNC male to 75 Ohm BNC female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm BNC to 75 Ohm BNC matching pad is brass. 50 Ohm BNC male to 75 Ohm BNC female RF impedance pad PE70MP1100 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with BNC to BNC connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 3 | ||
| PEWCP1100N-30 | Pasternack Enterprises | Key Specifications, Waveguide Size : WR-90, Flange Size: None Flange, Flange Type : UG Cover Flange, Flange Group : Standard, Minimum Frequency: 8.2 GHz, Maximum Frequency: 12.5 GHz, Maximum VSWR: 1.35:1, Maximum Insertion Loss: 0.2 dB, Coupling: 30 dB. WR-90 Waveguide 30 dB Loop Coupler, UG Cover Flange, N Female Coupled Port, 8.2 GHz to 12.5 GHz, Aluminum. Pasternack’s PEWCP1100N-30 is a WR-90 directional loop coupler. This directional waveguide coupler has type N connector with a female gender configuration for the coupling port. Our waveguide coupler operates over a frequency range between 8.2 GHz and 12.5 GHz. The PEWCP1100N-30 WR-90 waveguide coupler is a great option for test benches, radar, satellite, microwave radio, attenuation measurements, power measurements and source leveling applications. This waveguide loop coupler has a coupling accuracy of 30 dB. This 30 dB waveguide coupler has an aluminum body with chromate conversion plating. Our WR-90 directional waveguide coupler is rated for a maximum input power (CW) of 1,000 Watts. This 12.5 GHz waveguide coupler has a 1.1:1 maximum main line VSWR (voltage standing wave ratio). Additional dimensions and specifications for this WR-90 waveguide coupler are on our downloadable PDF datasheet above. This directional waveguide coupler has 100,000 Watts of peak power along with a directivity of 15 dB. The PEWCP1100N-30 loop coupler from Pasternack is frequently used in situations where power measurements are necessary within a system for measuring/sampling power or frequency monitoring with minimal signal loss to the main transmission line. Our 1,000 Watts (CW) waveguide coupler has a maximum insertion loss of 0.2 dB. This waveguide coupler has a UG cover flange which is made up of aluminum material with chromate conversion plating. The waveguide coupler with a UG cover flange has a minimum coupler directivity of 15 dB. This WR-90 waveguide coupler is one of the thousands of products available from Pasternack’s in-stock inventory with same business day shipment for local, domestic, and international orders. Make your online purchase for our high-quality waveguide coupler and take advantage of the same business day shipping services. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal directional loop coupler for your requirement. |
| 2 | ||
| PEWCP1100S-30 | Pasternack Enterprises | Key Specifications, Waveguide Size : WR-90, Flange Size: None Flange, Flange Type : UG Cover Flange, Flange Group : Standard, Minimum Frequency: 8.2 GHz, Maximum Frequency: 12.5 GHz, Maximum VSWR: 1.35:1, Maximum Insertion Loss: 0.2 dB, Coupling: 30 dB. WR-90 Waveguide 30 dB Loop Coupler, UG Cover Flange, SMA Female Coupled Port, 8.2 GHz to 12.5 GHz, Aluminum. Pasternack’s PEWCP1100S-30 is a WR-90 directional loop coupler. This directional waveguide coupler has SMA connector with a female gender configuration for the coupling port. Our waveguide coupler operates over a frequency range between 8.2 GHz and 12.5 GHz. The PEWCP1100S-30 WR-90 waveguide coupler is a great option for test benches, radar, satellite, microwave radio, attenuation measurements, power measurements and source leveling applications. This waveguide loop coupler has a coupling accuracy of 30 dB. This 30 dB waveguide coupler has an aluminum body with chromate conversion plating. Our WR-90 directional waveguide coupler is rated for a maximum input power (CW) of 1,000 Watts. This 12.5 GHz waveguide coupler has a 1.1:1 maximum main line VSWR (voltage standing wave ratio). Additional dimensions and specifications for this WR-90 waveguide coupler are on our downloadable PDF datasheet above. This directional waveguide coupler has 100,000 Watts of peak power along with a directivity of 15 dB. The PEWCP1100S-30 loop coupler from Pasternack is frequently used in situations where power measurements are necessary within a system for measuring/sampling power or frequency monitoring with minimal signal loss to the main transmission line. Our 1,000 Watts (CW) waveguide coupler has a maximum insertion loss of 0.2 dB. This waveguide coupler has a UG cover flange which is made up of aluminum material with chromate conversion plating. The waveguide coupler with a UG cover flange has a minimum coupler directivity of 15 dB. This WR-90 waveguide coupler is one of the thousands of products available from Pasternack’s in-stock inventory with same business day shipment for local, domestic, and international orders. Make your online purchase for our high-quality waveguide coupler and take advantage of the same business day shipping services. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal directional loop coupler for your requirement. |
| 2 | ||
| PEWCP1100N-40 | Pasternack Enterprises | Key Specifications, Waveguide Size : WR-90, Flange Size: None Flange, Flange Type : UG Cover Flange, Flange Group : Standard, Minimum Frequency: 8.2 GHz, Maximum Frequency: 12.5 GHz, Maximum VSWR: 1.35:1, Maximum Insertion Loss: 0.2 dB, Coupling: 40 dB. WR-90 Waveguide 40 dB Loop Coupler, UG Cover Flange, N Female Coupled Port, 8.2 GHz to 12.5 GHz, Aluminum. Pasternack’s PEWCP1100N-40 is a WR-90 directional loop coupler. This directional waveguide coupler has type N connector with a female gender configuration for the coupling port. Our waveguide coupler operates over a frequency range between 8.2 GHz and 12.5 GHz. The PEWCP1100N-40 WR-90 waveguide coupler is a great option for test benches, radar, satellite, microwave radio, attenuation measurements, power measurements and source leveling applications. This waveguide loop coupler has a coupling accuracy of 40 dB. This 40 dB waveguide coupler has an aluminum body with chromate conversion plating. Our WR-90 directional waveguide coupler is rated for a maximum input power (CW) of 1,000 Watts. This 12.5 GHz waveguide coupler has a 1.1:1 maximum main line VSWR (voltage standing wave ratio). Additional dimensions and specifications for this WR-90 waveguide coupler are on our downloadable PDF datasheet above. This directional waveguide coupler has 100,000 Watts of peak power along with a directivity of 15 dB. The PEWCP1100N-40 loop coupler from Pasternack is frequently used in situations where power measurements are necessary within a system for measuring/sampling power or frequency monitoring with minimal signal loss to the main transmission line. Our 1,000 Watts (CW) waveguide coupler has a maximum insertion loss of 0.2 dB. This waveguide coupler has a UG cover flange which is made up of aluminum material with chromate conversion plating. The waveguide coupler with a UG cover flange has a minimum coupler directivity of 15 dB. This WR-90 waveguide coupler is one of the thousands of products available from Pasternack’s in-stock inventory with same business day shipment for local, domestic, and international orders. Make your online purchase for our high-quality waveguide coupler and take advantage of the same business day shipping services. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal directional loop coupler for your requirement. |
| 1 | ||
| PEWCP1100S-50 | Pasternack Enterprises | Key Specifications, Waveguide Size : WR-90, Flange Size: None Flange, Flange Type : UG Cover Flange, Flange Group : Standard, Minimum Frequency: 8.2 GHz, Maximum Frequency: 12.5 GHz, Maximum VSWR: 1.35:1, Maximum Insertion Loss: 0.2 dB, Coupling: 50 dB. WR-90 Waveguide 50 dB Loop Coupler, UG Cover Flange, SMA Female Coupled Port, 8.2 GHz to 12.5 GHz, Aluminum. Pasternack’s PEWCP1100S-50 is a WR-90 directional loop coupler. This directional waveguide coupler has SMA connector with a female gender configuration for the coupling port. Our waveguide coupler operates over a frequency range between 8.2 GHz and 12.5 GHz. The PEWCP1100S-50 WR-90 waveguide coupler is a great option for test benches, radar, satellite, microwave radio, attenuation measurements, power measurements and source leveling applications. This waveguide loop coupler has a coupling accuracy of 50 dB. This 50 dB waveguide coupler has an aluminum body with chromate conversion plating. Our WR-90 directional waveguide coupler is rated for a maximum input power (CW) of 1,000 Watts. This 12.5 GHz waveguide coupler has a 1.1:1 maximum main line VSWR (voltage standing wave ratio). Additional dimensions and specifications for this WR-90 waveguide coupler are on our downloadable PDF datasheet above. This directional waveguide coupler has 100,000 Watts of peak power along with a directivity of 15 dB. The PEWCP1100S-50 loop coupler from Pasternack is frequently used in situations where power measurements are necessary within a system for measuring/sampling power or frequency monitoring with minimal signal loss to the main transmission line. Our 1,000 Watts (CW) waveguide coupler has a maximum insertion loss of 0.2 dB. This waveguide coupler has a UG cover flange which is made up of aluminum material with chromate conversion plating. The waveguide coupler with a UG cover flange has a minimum coupler directivity of 15 dB. This WR-90 waveguide coupler is one of the thousands of products available from Pasternack’s in-stock inventory with same business day shipment for local, domestic, and international orders. Make your online purchase for our high-quality waveguide coupler and take advantage of the same business day shipping services. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal directional loop coupler for your requirement. |
| 1 | ||
| PE3W03732/SP1-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. N Male Right Angle to TNC Male Right Angle Low Loss Cable Using LMR-400 Coax with HeatShrink and 90 Deg. Clock in 100CM., Radio frequency assembly N male right angle to TNC male right angle low loss cable using LMR-400 coax with heatshrink and 90 deg. clock in 100CM from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male right angle to TNC male right angle low loss cable using LMR-400 coax with heatshrink and 90 deg. clock in 100CM, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle N type cable connection on one end and right angle TNC cable connection on the other. Our right angle type N to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. This N type to TNC cable is a male to male coax assembly, PE3W03732/SP1-100CM, can also be known as a right angle type N plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3W03732/SP1-100CM is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03732/SP1-100CM can also be used in the other direction and will be right angle TNC male to right angle type N male cable assembly if the opposite connectivity is required. Type N right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to TNC male right angle low loss cable using LMR-400 coax with heatshrink and 90 deg. clock in 100CM. |
| 0 | ||
| PE2CP1100 | Pasternack Enterprises | Key Specifications, Directionality: Directional, Connector Series: SMA, Connector Gender: Female, Minimum Frequency: 4 GHz, Maximum Frequency: 18 GHz, Maximum Input Power: 50 Watt, Coupling Value: 6 dB. Directional 6 dB SMA Coupler From 4 GHz to 18 GHz Rated to 50 Watts. RF coupler part number PE2CP1100 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with SMA ports. Our directional coupler design uses SMA ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 4 GHz and a maximum frequency of 18 GHz. Directional coupler part # PE2CP1100 is constructed with a coupling value of 6 dB and a coupler directivity of 12 dB. This female SMA directional coupler is built with a maximum insertion loss of 0.5 dB and a maximum input power of 50 watts. Our directional coupler design with SMA connector is rated for a maximum insertion loss of 0.5 dB and a maximum VSWR of 1.5. Additional female SMA coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2CP1100 directional 6 dB SMA coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts. |
| 0 | ||
![]() Venkel Ltd. | UPTF0402-16W-P-1100BT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;110R;�0.1% RoHS : Compliant | 0 | ||
| MELFC0207-XP-1100BT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�5PPM;110R;�0.1% RoHS : Compliant | 0 | |||
| HPTF0603-QP-1100FT | VENKEL LTD | High Power Thin Film CR;0603;1/10W;�5PPM;110R;�1% RoHS : Compliant | 0 | |||
| HPTF0603-QP-1100DT | VENKEL LTD | High Power Thin Film CR;0603;1/10W;�5PPM;110R;�0.5% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-1100AT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;110R;�0.05% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-1100BT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;110R;�0.1% RoHS : Compliant | 0 | |||
| UPTF1206-8W-P-1100AT | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;5PPM;110R;�0.05% RoHS : Compliant | 0 | |||
| HPTF0805-RP-1100BT | VENKEL LTD | High Power Thin Film CR;0805;1/8W;�5PPM;110R;�0.1% RoHS : Compliant | 0 | |||
| UPTF2512-2W-P-1100BT | VENKEL LTD | Ultra Precision Thin Film CR;2512;1/2W;�5PPM;110R;�0.1% RoHS : Compliant | 0 | |||
| HPTF0805-RP-1100CT | VENKEL LTD | High Power Thin Film CR;0805;1/8W;�5PPM;110R;�0.25% RoHS : Compliant | 0 | |||
| HPTF2010-UP-1100AT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�5PPM;110R;�0.05% RoHS : Compliant | 0 | |||
| UPTF1206-8W-P-1100BT-1K | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;5PPM;110R;�0.1% RoHS : Compliant | 0 | |||
| HPTF1210-UP-1100DT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�5PPM;110R;�0.5% RoHS : Compliant | 0 | |||
| UPTF2010-2W-P-1100AT | VENKEL LTD | Ultra Precision Thin Film CR;2010;1/2W;�5PPM;110R;�0.05% RoHS : Compliant | 0 | |||
| MELFC0207-XP-1100CT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�5PPM;110R;�0.25% RoHS : Compliant | 0 | |||
![]() Vyrian | 3250P-1-100 | Bourns Inc | Trimmer, Wire Wound, 1W, 10ohm, 5% +/-Tol, 50ppm/Cel, 25 Turn(s) RoHS : Compliant | 15,509 | ||
| FP1100002 | Diodes Incorporated | Parallel - Fundamental Quartz Crystal, 11MHz Nom | 12,770 | |||
P1100ECMC![]() | Littelfuse Inc | Thyristor Surge Protector, 30A RoHS : Not Compliant | 12,220 | |||
| P1100SDRP | Littelfuse Inc | 11,816 | ||||
P1100ECLRP2![]() | Littelfuse Inc | Thyristor Surge Protector, 130V V(BO) Max, 60A, TO-92 RoHS : Compliant | 11,463 | |||
P1100EAL![]() | Littelfuse Inc | Thyristor Surge Protector, 130V V(BO) Max, 20A, TO-92 RoHS : Compliant | 9,208 | |||
| P1100SALRP-A | Littelfuse Inc | Thyristor Surge Protector RoHS : Compliant | 8,907 | |||
SDP1100Q38CB![]() | Littelfuse Inc | SIDAC, 130V V(BO) Max RoHS : Compliant | 6,913 | |||
| P1100FNLYP | Littelfuse Inc | Thyristor Surge Protector, 130V V(BO) Max, 300A, TO-262M RoHS : Compliant | 6,907 | |||
| NP1100SBMCT3G | onsemi | Thyristor Surge Protector, 130V V(BO) Max, 30A, DO-214AA RoHS : Compliant | 6,880 | |||
| P1100G - 1 X 100GBE PCIE NIC | Broadcom Limited | 6,467 | ||||
P1100EBL![]() | Littelfuse Inc | Thyristor Surge Protector, 130V V(BO) Max, 30A, TO-92 RoHS : Compliant | 4,379 | |||
P1100EBLRP2![]() | Littelfuse Inc | Thyristor Surge Protector, 130V V(BO) Max, 30A, TO-92 RoHS : Compliant | 4,329 | |||
| RCWP11000000ZSWB99 | Vishay Intertechnologies | Metal Glaze/thick Film, 0.5W, 0ohm, Surface Mount, 1010 RoHS : Not Compliant | 361 | |||
| 3296P-1-100LF | Bourns Inc | Trimmer, Cermet, 0.5W, 10ohm, 300V, 10% +/-Tol, 100ppm/Cel, 25 Turn(s) RoHS : Compliant | 272 | |||
![]() Waytek, Inc. | 175-P1-100-2 | MP | 100A Manual Push to Trip Reset 1/4" Stud 90° Panel Mount Circuit Breaker |
| 62 | |
| 875-P1-100-2 | MP | Panel Mount High Amp Circuit Breaker, Type III, On-Off 100 Amps, 48VDC |
| 22 |
| ALLDATASHEET vous a-t-il été utile ? [ DONATE ] |
À propos de Alldatasheet | Publicité | Contactez-nous | Politique de confidentialité | Lien vers la fiche technique | Echange de liens | Fabricants All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |