Moteur de recherche de fiches techniques de composants électroniques
  French  ▼
ALLDATASHEET.FR

X  



E74ZAX-R revendeur
revendeurNo de pièceFabricantDescriptionPriceQty.
BuyNow

Bisco Industries		TZE741G

 Brother International
60
MS20470E7-4

 MS Rivets
2
AE74219A

 Danfoss A/S
1

Ameya Holding Limited		TLE7469GV52

 Infineon Technologies AG IC 5/2.5 DUAL REG TLE7469GV52
RoHS : Compliant
176

ComSIT USA		WE744823422

 AVAILABLE EU
302

ComSIT USA		GSP2E7410

 CSR plc Electronic Component
RoHS : Not Compliant
1,172
LTE7477LM2TA

 Lite-On Semiconductor Corporation Electronic Component
RoHS : Compliant
1,000
TLE7469GV52

 Infineon Technologies AG Fixed Positive LDO Regulator, 2 Output, 5V1, 2.6V2, PDSO12
RoHS : Compliant
885
COP8SGE744V8

 National Semiconductor Corporation 8-BIT CMOS OTP MICROCONTROLLER WITH 8K MEMORY, TWO COMPARATORS AND USART Microcontroller, 8-Bit, OTPROM, COP800 CPU, 15MHz, CMOS, PQCC44
RoHS : Not Compliant
794
B45196E7475K409

 KEMET Corporation TANTALUM CAPACITOR Tantalum Capacitor, Polarized, Tantalum (dry/solid), 50V, 10% +Tol, 10% -Tol, 4.7uF, Surface Mount, 2917
RoHS : Compliant
420
CEVEE740QB5301TSD0

 TDK Micronas GmbH Electronic Component
RoHS : Compliant
262
TLE7469GV52AUMA1

 Infineon Technologies AG Fixed Positive LDO Regulator, 2 Output, 5V1, 2.6V2, PDSO12
RoHS : Compliant
155

Chip 1 Exchange		TCE74-510NF

 Eurofarad INSTOCK
769
AD90-NE747-94

 INSTOCK
105
WE-742792113

 Wurth Elektronik INSTOCK
92
PE 74

 INSTOCK
43
WE74279244

 Wurth Elektronik INSTOCK
10
NE74020C

 INSTOCK
5

Avnet Asia		SIT8924BA-18-18E-74.250000D

 SiTime Corporation (Alt: SIT8924BA-18-18E-74.250000D)
RoHS : Compliant
0
GPCE743614114HR

 Amphenol Corporation (Alt: GPCE743614114HR)
RoHS : Compliant
0
SIT9120AI-2B3-25E74.250000E

 SiTime Corporation Silicon Oscillator 74.25MHz 2.5V 4-Pin QFN T/R (Alt: SIT9120AI-2B3-25E74.250000E)
RoHS : Compliant
0
RJE741AA1310

 Amphenol Corporation (Alt: RJE741AA1310)
RoHS : Compliant
0
M55342K12B3E74RTSV

 Vishay Intertechnologies SMD Chip Resistor, 3.74 kohm, ? 1%, 100 mW, 0603 [1608 Metric], Thin Film, Established Reliability (Alt: M55342K12B3E74RTSV)
RoHS : Compliant
0

Braemac Americas-Symmetry		ASE7-48.000MHZ-LC-T

 Abracon Corporation
1 : $0.6
0
ASE7-48.000MHZ-LR-T

 Abracon Corporation
1 : $0.6
0
ASE7-40.000MHZ-LR-T

 Abracon Corporation
1 : $0.6
0
ASE7-40.000MHZ-LC-T

 Abracon Corporation
1 : $0.6
0

Chip-Germany GmbH		B45196E7475K409

 TDK Electronics
35

Component Electronics, Inc		NTE74LS138

 NTE Electronics Inc IN STOCK SHIP TODAY
RoHS : Compliant
1,000 : $1.25
100 : $1.44
1 : $1.92
97
M55342K02B1E74S

 IN STOCK SHIP TODAY
1,000 : $1.0
100 : $1.15
1 : $1.54
35
NTE74154

 NTE Electronics Inc IN STOCK SHIP TODAY
1,000 : $2.5
100 : $2.88
1 : $3.85
18
NTE74S188

 NTE Electronics Inc IN STOCK SHIP TODAY
1,000 : $7.5
100 : $8.65
1 : $11.54
14
NTE7483

 NTE Electronics Inc IN STOCK SHIP TODAY
1,000 : $1.5
100 : $1.73
1 : $2.31
1

EBV Elektronik		TLE7469GV52AUMA1

 Infineon Technologies AG (Alt: SP000316703)
RoHS : Compliant
0
TLE7469GV53AUMA1

 Infineon Technologies AG Fixed LDO Voltage Regulator AECQ100 42V to 55V 300mV Dropout 5V215mA out SOIC12 (Alt: SP000316704)
RoHS : Compliant
0
SVITLE7469GV52AUMA1

 Infineon Technologies AG (Alt: SP000316703)
RoHS : Compliant
0

Neutron USA		E74000

 ifm efector inc 2 Core EPR Sheath Actuator/Sensor Cable, 1.5 mmsq CSA, AS-Interface flat cable
1 : $599.99
4
DEE7-41D

 Banner Engineering Corp Cordset, Str M12 F 4p to Str M12 M 4p, 0.31m, PVC Yellow, 17140
1 : $156.46
1
QS30VR3RE-74180

 Banner Engineering Corp Banner Engineering QS30VR3RE-74180 Photoelectric, QS30 VR3RE-74180 Kit
1 : $564.99
1
XCSE741214

 Telemechanique Sensors Interlock Switches SAFETY INTERLOCK SWITCH +OPTIONS
1 : $1,834.99
0
LTE7461N

 Zyxel Communications Corporation M602 4G LTE-A OUTDOOR ROUTER COMP W/ AT&T & VERIZON NEBULAFLEX
1 : $544.98
0
PCIE-7432

 ADLINK Technology Inc Datalogging & Acquisition PCIe-7432 32-CH digital input and 32-CH digital output card that provide a robust 2,500V isolation protection.
1 : $455.88
0

Pasternack Enterprises US		PE7403-3

 Pasternack Enterprises Key Specifications, Design: Fixed, Maximum Frequency: 65 GHz, Impedance: 50 Ohm, Power Maximum: 1 Watt, VSWR Maximum: 1.65:1, Attenuation: 3 dB, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Series 2: 1.85mm, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 3 dB Fixed Attenuator, 1.85mm Male to 1.85mm Female Passivated Stainless Steel Body Rated to 1 Watt Up to 65 GHz. PE7403-3 is a fixed 3 dB attenuator from Pasternack. This 3dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 1.85mm attenuator has a male gender on side 1 and a 1.85mm female connector on side 2. The Pasternack PE7403-3 3 dB attenuator is rated for up to 65 GHz. Our microwave attenuator is rated to 1 Watts at the stated attenuation value. Our fixed RF attenuator PE7403-3 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 3dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
1 : $1,210.0
5 : $1,161.6
10 : $1,113.2
37
PE7468-2

 Pasternack Enterprises Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 12 GHz, Nominal Attenuation: 2 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 2 Watts, Body Material: Brass, Connector-In Series: N, Connector-In Gender: Female, Connector-Out Series: N, Connector-Out Gender: Male, Max Operating Temperature: 80 deg C, Min Operating Temperature: -50 deg C. 2 dB Fixed Attenuator, N Male to N Female Brass Body Rated to 2 Watts, DC to 12 GHz. The PE7468-2 is a fixed 2 dB attenuator from Pasternack. This 2 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Pasternack's PE7468-2 fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. This passive attenuator has a maximum VSWR of 1.35:1 and operates between -50 and 80 deg C. Our radio frequency attenuator with N-type connectors is constructed with brass body material. This passive conectorized radio frequency attenuator has 0 dBc typical passive intermodulation. The conectorized bi-directional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This N-type attenuator has a female gender on side 1 and a N-type male connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 2 dB. The Pasternack PE7468-2 attenuator is rated for up to 12 GHz. This coaxial attenuator is also suitable for instrumentation, precision measurements, prototyping and characterization, production systems, WiFi 6E and 5G cellular bands applications. The attenuator has a 1.35:1 connector built with 1.35:1 plating. Our fixed RF attenuator PE7468-2 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 2 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.
1 : $128.99
25 : $122.54
50 : $116.09
100 : $110.93
10
PE7469-3

 Pasternack Enterprises Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 12 GHz, Nominal Attenuation: 3 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 2 Watts, Body Material: Brass, Connector-In Series: TNC, Connector-In Gender: Female, Connector-Out Series: TNC, Connector-Out Gender: Male, Max Operating Temperature: 80 deg C, Min Operating Temperature: -50 deg C. 3 dB Fixed Attenuator, TNC Male to TNC Female Brass Body Rated to 2 Watts, DC to 12 GHz. The PE7469-3 is a fixed 3 dB attenuator from Pasternack. This 3 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Pasternack's PE7469-3 fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. This passive attenuator has a maximum VSWR of 1.35:1 and operates between -50 and 80 deg C. Our radio frequency attenuator with TNC connectors is constructed with brass body material. This passive conectorized radio frequency attenuator has 0 dBc typical passive intermodulation. The conectorized bi-directional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This TNC attenuator has a female gender on side 1 and a TNC male connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 3 dB. The Pasternack PE7469-3 attenuator is rated for up to 12 GHz. This coaxial attenuator is also suitable for instrumentation, precision measurements, prototyping and characterization, production systems, WiFi 6E and 5G cellular bands applications. The attenuator has a 1.35:1 connector built with 1.35:1 plating. Our fixed RF attenuator PE7469-3 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 3 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.
1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03
8
PE7486-40

 Pasternack Enterprises Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 26.5 GHz, Nominal Attenuation: 40 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 20 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 40 dB Fixed Attenuator, SMA Male to SMA Female Black Anodized Aluminum Body Rated to 20 Watts Up to 26.5 GHz. PE7486-40 is a fixed 40 dB attenuator from Pasternack. This 40 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 20 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with black anodized aluminum body material. The connectorized unidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 40 dB fixed attenuator has a gold-plated brass inner conductor. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 40 dB. The Pasternack PE7486-40 attenuator is rated for up to 26.5 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 40 dB attenuator has a brass connector built with nickel plating. Our fixed RF attenuator PE7486-40 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 40 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.
1 : $440.99
10 : $432.17
25 : $423.35
100 : $414.53
8
PE7421-30

 Pasternack Enterprises Key Specifications, Design: Fixed, Maximum Frequency: 4 GHz, Impedance: 50 Ohm, Power Maximum: 100 Watt, VSWR Maximum: 1.2:1, Attenuation: 30 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 30 dB Fixed Attenuator, N Male to N Female Black Anodized Aluminum Heatsink Body Rated to 100 Watts Up to 4 GHz. PE7421-30 is a fixed 30 dB attenuator from Pasternack. This 30dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7421-30 30 dB attenuator is rated for up to 4 GHz. Our microwave attenuator is rated to 100 Watts at the stated attenuation value. Our fixed RF attenuator PE7421-30 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 30dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
1 : $1,020.0
5 : $979.2
10 : $938.4
6
PE7429-5

 Pasternack Enterprises Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 0.5 Watt, VSWR Maximum: 1.35:1, Attenuation: 5 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 5 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Passivated Stainless Steel Body Rated to 0.5 Watts Up to 40 GHz. PE7429-5 is a fixed 5 dB attenuator from Pasternack. This 5dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7429-5 5 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 0.5 Watts at the stated attenuation value. Our fixed RF attenuator PE7429-5 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 5dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
1 : $353.99
10 : $339.83
25 : $325.67
100 : $311.51
6
PE7469-10

 Pasternack Enterprises Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 12 GHz, Nominal Attenuation: 10 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 2 Watts, Body Material: Brass, Connector-In Series: TNC, Connector-In Gender: Female, Connector-Out Series: TNC, Connector-Out Gender: Male, Max Operating Temperature: 80 deg C, Min Operating Temperature: -50 deg C. 10 dB Fixed Attenuator, TNC Male to TNC Female Brass Body Rated to 2 Watts, DC to 12 GHz. The PE7469-10 is a fixed 10 dB attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Pasternack's PE7469-10 fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. This passive attenuator has a maximum VSWR of 1.35:1 and operates between -50 and 80 deg C. Our radio frequency attenuator with TNC connectors is constructed with brass body material. This passive conectorized radio frequency attenuator has 0 dBc typical passive intermodulation. The conectorized bi-directional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This TNC attenuator has a female gender on side 1 and a TNC male connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 10 dB. The Pasternack PE7469-10 attenuator is rated for up to 12 GHz. This coaxial attenuator is also suitable for instrumentation, precision measurements, prototyping and characterization, production systems, WiFi 6E and 5G cellular bands applications. The attenuator has a 1.35:1 connector built with 1.35:1 plating. Our fixed RF attenuator PE7469-10 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 10 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.
1 : $90.99
25 : $86.44
50 : $81.89
100 : $78.25
6
PE7432-10

 Pasternack Enterprises Key Specifications, Design: Continuously Variable, Maximum Frequency: 8 GHz, Impedance: 50 Ohm, Power Maximum: 5 Watt, VSWR Maximum: 1.5:1, Connector Series 1: SMA, Connector Gender 1: Female, Connector Series 2: SMA, Connector Gender 2: Female, Minimum Attenuation: 0 dB, Maximum Attenuation: 10 dB. 0 to 10 dB Variable Attenuator, SMA Female to SMA Female Rated to 5 Watts from 4 GHz to 8 GHz. PE7432-10 is a variable attenuator from Pasternack. This SMA microwave attenuator is a continuously variable attenuator design. Our coaxial 50 Ohm adjustable attenuator is precision manufactured to RF and microwave industry specifications. The Pasternack variable RF attenuator has a female gender for connector 1 and a SMA female for connector 2. PE7432-10 variable attenuator has a minimum attenuation of 0 dB and a maximum attenuation of 10 dB. This microwave variable attenuator has frequency range of 4 GHz to 8 GHz and a maximum VSWR of 1.5:1. Our countinously variable attenuator is rated to 5 Watt at the stated attenuation. Our variable attenuator PE7432-10 is shipped same day as purchased from Pasternack's facility certified to ISO 9001:2015. This attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
1 : $2,520.0
5 : $2,419.2
10 : $2,318.4
25 : $2,217.6
4
PE7424-10

 Pasternack Enterprises Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 100 Watt, VSWR Maximum: 1.35:1, Attenuation: 10 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 10 dB Fixed Attenuator, N Male to N Female Directional Black Anodized Aluminum Heatsink Body Rated to 100 Watts Up to 18 GHz. PE7424-10 is a fixed 10 dB attenuator from Pasternack. This 10dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7424-10 10 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 100 Watts at the stated attenuation value. Our fixed RF attenuator PE7424-10 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 10dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
1 : $1,600.0
5 : $1,536.0
10 : $1,472.0
25 : $1,408.0
3
PE7486-20

 Pasternack Enterprises Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 26.5 GHz, Nominal Attenuation: 20 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 20 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 20 dB Fixed Attenuator, SMA Male to SMA Female Black Anodized Aluminum Body Rated to 20 Watts Up to 26.5 GHz. PE7486-20 is a fixed 20 dB attenuator from Pasternack. This 20 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 20 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with black anodized aluminum body material. The connectorized unidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 20 dB fixed attenuator has a gold-plated brass inner conductor. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 20 dB. The Pasternack PE7486-20 attenuator is rated for up to 26.5 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 20 dB attenuator has a brass connector built with nickel plating. Our fixed RF attenuator PE7486-20 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 20 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.
1 : $380.99
10 : $373.37
25 : $365.75
100 : $358.13
2
PE7491-6

 Pasternack Enterprises Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 6 dB, Attenuation Accuracy, Typ: 1 dB, VSWR, Max: 1.25:1, Input Power, Max (CW): 10 Watts, Body Material: Aluminum, Connector-In Series: NEX10, Connector-In Gender: Male, Connector-Out Series: NEX10, Connector-Out Gender: Female, Max Operating Temperature: 75 deg C, Min Operating Temperature: -40 deg C. 6 dB Fixed Attenuator, NEX10 Male to NEX10 Female Aluminum Body Rated to 10 Watts Up to 6 GHz. PE7491-6 is a fixed 6 dB attenuator from Pasternack. This 6 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s PE7491-6 fixed attenuator is available with a typical attenuation accuracy of 1 dB. The max input power rating (CW) of this RF attenuator is 10 Watts. This attenuator has a maximum VSWR of 1.25:1 and operates between -40 and 75 deg C. Our fixed radio frequency attenuator with NEX10 connectors is constructed with aluminum body material. The connectorized bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 6 dB fixed attenuator has a silver-plated beryllium copper inner conductor. This NEX10 attenuator has a male gender on side 1 and a NEX10 female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 6 dB. The Pasternack PE7491-6 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for instrumentation, precision measurements, prototyping and characterization, production systems, 5G cellular bands and DAS systems applications. The 6 dB attenuator has a brass connector built with tri-metal plating. Our fixed RF attenuator PE7491-6 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 6 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.
1 : $282.99
10 : $277.33
25 : $271.67
100 : $266.01
2
PE7471-0

 Pasternack Enterprises Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 26.5 GHz, Nominal Attenuation: 0 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 2 Watts, Body Material: Aluminum, Connector-In Series: 3.5mm, Connector-In Gender: Male, Connector-Out Series: 3.5mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 0 dB Fixed Attenuator, 3.5mm Male to 3.5mm Female Aluminum Body Rated to 2 Watts Up to 26.5 GHz. PE7471-0 is a fixed attenuator from Pasternack. This attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 3.5mm connectors is constructed with aluminum body material. The attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This fixed attenuator has a gold-plated brass inner conductor. This 3.5mm attenuator has a male gender on side 1 and a 3.5mm female connector on side 2. The Pasternack PE7471-0 attenuator is rated for up to 26.5 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7471-0 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.
1 : $237.99
10 : $228.47
25 : $218.95
100 : $209.43
2
PE7460-20

 Pasternack Enterprises Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Connector-Out Impedance: 50 Ohms, Max Freq: 12.4 GHz, Nominal Attenuation: 20 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.25:1, Input Power, Max (CW): 5 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 20 dB Fixed Attenuator, SMA Male to SMA Female Black Anodized Aluminum Body Rated to 5 Watts Up to 12.4 GHz. PE7460-20 is a fixed 20 dB attenuator from Pasternack. This 20 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers, and detectors. Pasternack's PE7460-20 in-series fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.25:1 and operates between -55 and +125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with black anodized aluminum body material. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. The Pasternack PE7460-20 20 dB attenuator is rated for up to 12.4 GHz. Our microwave attenuator is rated to 5 Watts at the stated attenuation value. This coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization, production systems, wifi 6E, 5G cellular bands applications. Our fixed RF attenuator PE7460-20 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 20 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and trained sales team can get you to the ideal RF coaxial fixed attenuator as per your requirement.
1 : $143.99
25 : $136.79
50 : $129.59
100 : $123.83
1
PE7428-06

 Pasternack Enterprises Key Specifications, Design: Fixed, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Power Maximum: 10 Watt, VSWR Maximum: 1.2:1, Attenuation: 6 dB, Connector Series 1: SMA, Connector Gender 1: Male, Connector Series 2: SMA, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 6 dB Fixed Attenuator, SMA Male to SMA Female Black Anodized Aluminum Heatsink Body Rated to 10 Watts Up to 6 GHz. PE7428-06 is a fixed 6 dB attenuator from Pasternack. This 6dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. The Pasternack PE7428-06 6 dB attenuator is rated for up to 6 GHz. Our microwave attenuator is rated to 10 Watts at the stated attenuation value. Our fixed RF attenuator PE7428-06 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 6dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
1 : $175.99
10 : $168.95
25 : $161.91
100 : $154.87
0
PE7469-30

 Pasternack Enterprises Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 12 GHz, Nominal Attenuation: 30 dB, Attenuation Accuracy, Typ: 3 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 2 Watts, Body Material: Brass, Connector-In Series: TNC, Connector-In Gender: Female, Connector-Out Series: TNC, Connector-Out Gender: Male, Max Operating Temperature: 80 deg C, Min Operating Temperature: -50 deg C. 30 dB Fixed Attenuator, TNC Male to TNC Female Brass Body Rated to 2 Watts, DC to 12 GHz. The PE7469-30 is a fixed 30 dB attenuator from Pasternack. This 30 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Pasternack's PE7469-30 fixed attenuator is available with a typical attenuation accuracy of 3 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. This passive attenuator has a maximum VSWR of 1.35:1 and operates between -50 and 80 deg C. Our radio frequency attenuator with TNC connectors is constructed with brass body material. This passive conectorized radio frequency attenuator has 0 dBc typical passive intermodulation. The conectorized bi-directional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This TNC attenuator has a female gender on side 1 and a TNC male connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 30 dB. The Pasternack PE7469-30 attenuator is rated for up to 12 GHz. This coaxial attenuator is also suitable for instrumentation, precision measurements, prototyping and characterization, production systems, WiFi 6E and 5G cellular bands applications. The attenuator has a 1.35:1 connector built with 1.35:1 plating. Our fixed RF attenuator PE7469-30 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 30 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.
1 : $94.19
25 : $89.48
50 : $84.77
100 : $81.0
0

TE Connectivity		SBCHE74K7J

 TE Connectivity SBCHE7 4K7 5% Resistance Value: 4.7K Ω Element Type: Wire Wound Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 7 W Through-Hole Resistor | 4.7K Ω Wire Wound Power Resistor 5 % | TE Connectivity
RoHS : Compliant
500 : $2.13
250 : $2.2
100 : $2.27
50 : $2.35
25 : $2.42
10 : $2.49
1 : $2.57
974
SBCHE7470RJ

 TE Connectivity SBCHE7 470R 5% Resistance Value: 470 Ω Element Type: Wire Wound Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 7 W Through-Hole Resistor | 470 Ω Wire Wound Power Resistor 5 % | TE Connectivity
RoHS : Compliant
500 : $1.81
250 : $1.87
100 : $1.93
50 : $2.0
25 : $2.06
10 : $2.12
1 : $2.18
902

Venkel Ltd.		TFCR0402-16W-E-7411BT

 VENKEL LTD Thin Film CR;0402;1/16W;�25PPM;7.41K;�0.1%
RoHS : Compliant
0
TFCR0402-16W-E-7412FT-1K

 VENKEL LTD Thin Film CR;0402;1/16W;�25PPM;74.1K;�1%
RoHS : Compliant
0
TFCR0402-16W-E-74R1FT-1K

 VENKEL LTD Thin Film CR;0402;1/16W;�25PPM;74.1R;�1%
RoHS : Compliant
0
TFCR0603-16W-E-7411CT

 VENKEL LTD Thin Film CR;0603;1/16W;�25PPM;7.41K;�0.25%
RoHS : Compliant
0
TFCR0805-10W-E-7412DT

 VENKEL LTD Thin Film CR;0805;1/10W;�25PPM;74.1K;�0.5%
RoHS : Compliant
0
TFCR0805-8W-E-7411CT-1K

 VENKEL LTD Thin Film CR;0805;1/8W;�25PPM;7.41K;�0.25%
RoHS : Compliant
0
TFCR1206-4W-E-7412CT

 VENKEL LTD Thin Film CR;1206;1/4W;�25PPM;74.1K;�0.25%
RoHS : Compliant
0
TFCR1206-8W-E-7413DT

 VENKEL LTD Thin Film CR;1206;1/8W;�25PPM;741K ;�0.5%
RoHS : Compliant
0
TFCR1206-8W-E-74R1CT

 VENKEL LTD Thin Film CR;1206;1/8W;�25PPM;74.1R;�0.25%
RoHS : Compliant
0
TFCR1210-4W-E-7412DT

 VENKEL LTD Thin Film CR;1210;1/4W;�25PPM;74.1K;�0.5%
RoHS : Compliant
0
TFCR2010-4W-E-7413BT

 VENKEL LTD Thin Film CR;2010;1/4W;�25PPM;741K ;�0.1%
RoHS : Compliant
0
TFCR2512-2W-E-7410CT-1K

 VENKEL LTD Thin Film CR;2512;1/2W;�25PPM;741R;�0.25%
RoHS : Compliant
0
TFCR2512-2W-E-7410FT

 VENKEL LTD Thin Film CR;2512;1/2W;�25PPM;741R;�1%
RoHS : Compliant
0
UPTF0402-16W-E-7411AT

 VENKEL LTD Ultra Precision Thin Film CR;0402;1/16W;�25PPM;7.41K;�0.05%
RoHS : Compliant
0
UPTF2512-2W-E-7410AT

 VENKEL LTD Ultra Precision Thin Film CR;2512;1/2W;�25PPM;741R;�0.05%
RoHS : Compliant
0

Win Source Electronics		TLE7469GV52

 Infineon Technologies AG IC REG LINEAR VOLT TLE7469
RoHS : Compliant
107 : $2.8089
80 : $3.133
62 : $3.241
45 : $3.349
29 : $3.4571
12 : $4.2133
10,000
TLE7469GV52AUMA1

 Infineon Technologies AG IC REG LINEAR 2.6V/5V DSO-12 / Linear Voltage Regulator IC Positive Fixed 2 Output 200mA, 215mA PG-DSO-12-11
RoHS : Compliant
161 : $1.8637
129 : $1.9394
100 : $2.0152
70 : $2.1667
45 : $2.2425
21 : $2.394
9,280

Lien URL



ALLDATASHEET vous a-t-il été utile ?  [ DONATE ]  

À propos de Alldatasheet   |   Publicité   |   Contactez-nous   |   Politique de confidentialité   |   Lien vers la fiche technique    |   Echange de liens   |   Fabricants
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com