7004-01-MS-A2-R1 Price, revendeur, Stock

PCB terminal block - nominal current: 15 A - rated voltage (III/2): 320 V - nominal cross section: 1.5 mm² - pitch: 5.08 mm - number of positions: 2 - connection method: Push-in spring connection - mounting: Wave soldering - conductor/PCB connection direction: 0 ° - color: green - Pin layout: Linear double pinning - Solder pin [P]: 3.4 mm
RoHS : Compliant

10,000 : $1.315
7,500 : $1.335
5,000 : $1.3553
2,500 : $1.376
1,000 : $1.4127
500 : $1.4514
250 : $1.5136
50 : $1.7089

121537-0040

ITT Interconnect Solutions

CGE6E16H2Z-B-03 / 121537-0040 / Circular
RoHS : Compliant

5 : $319.23
4 : $325.74
3 : $365.75
2 : $445.75

121567-0041-W

ITT Interconnect Solutions

KPSE0E1210PW-DN-A34; MIL-DTL 26482 Series I & Mil
RoHS : Compliant

50 : $42.4
38 : $43.26
25 : $55.38
13 : $86.53

1300070047

Woodhead Molex

Molex 1300070047 Sensor Cables / uator Cables Mc 6P Fp 20 90D 16/6 PVC
RoHS : Compliant

12 : $115.16
2 : $121.22

111447-0041

ITT Interconnect Solutions

KJA7T15F35PB / 111447-0041 / Circular
RoHS : Compliant

25 : $324.75
19 : $331.38
13 : $469.5
7 : $826.04

1200700420

Woodhead Molex

Molex 1200700420 Circular Metric Connectors Mic 5P Mr 0.6M 22/1 Pvc Ss
RoHS : Compliant

100 : $36.67
50 : $37.41
25 : $38.18
4 : $38.95

09-0137-70-04

Franz Binder GmbH & Co

M16 IP40 Male angled connector Contacts: 4 (04-a) 4.0-6.0mm unshielded solder IP40
RoHS : Compliant

1,000 : $8.78
500 : $8.89
250 : $9.14
100 : $9.67
50 : $9.96
25 : $10.42
5 : $11.5

37-004-0

Mode Electronics

5A @ 250V
RoHS : Compliant

100,000 : $0.1558
50,000 : $0.1575
25,000 : $0.1579
7,500 : $0.169
5,000 : $0.1714
2,500 : $0.1739
1,000 : $0.1818
250 : $0.2308

44/7004-20-4

TE Connectivity

44/7004-20-4 MOQ Reduction
RoHS : Compliant

5,000 : $2.9
3,750 : $2.96
2,500 : $4.35
1,250 : $8.51

26-70-04BUND

TE Connectivity

Relay 26-70-04 BUND MOQ Reduction
RoHS : Compliant

20 : $173.94
15 : $177.49
10 : $252.22
5 : $476.42

031-0497-004

ITT Interconnect Solutions

Cont Cak 16 Assy(ch); Mil-dtl 5015 Firewall; Circu
RoHS : Compliant

25 : $160.03
19 : $163.3
13 : $226.11
7 : $396.59

Pasternack Enterprises US

PE33700-48

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 48 inches. SSMA Male to SSMA Male Cable 48 Inch Length Using RG188 Coax., Radio frequency assembly SSMA male to SSMA male cable 48 inch length using RG188 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SSMA male to SSMA male cable 48 inch length using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMA to SSMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMA cable connection on one end and SSMA cable connection on the other. Our SSMA to SSMA cable assemblies have a male gender on end 1 and male on end 2. This SSMA to SSMA cable is a male to male coax assembly, PE33700-48, can also be known as a SSMA plug to SSMA plug cable assembly and will be shipped same-day as it is purchased. SSMA plug to SSMA plug cable assembly PE33700-48 is built with RG188 which is a flexible coax type. The Pasternack flexible SSMA cable assembly is manufactured with SSMA to SSMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SSMA male to SSMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SSMA plug to SSMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMA to SSMA cable assembly for quick shipment worldwide. Variations of SSMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMA male to SSMA male cable 48 inch length using RG188 coax.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

100

PE7004-2

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 2 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 2 dB Fixed Attenuator, N Male to N Female Passivated Stainless Steel Body Rated to 2 Watts Up to 18 GHz. PE7004-2 is a fixed 2 dB attenuator from Pasternack. This 2dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7004-2 2 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7004-2 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 2dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $387.99
10 : $372.47
25 : $356.95

PE7004-30

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 30 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 30 dB Fixed Attenuator, N Male to N Female Passivated Stainless Steel Body Rated to 2 Watts Up to 18 GHz. PE7004-30 is a fixed 30 dB attenuator from Pasternack. This 30dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7004-30 30 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7004-30 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 30dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
RoHS : Unknown

1 : $338.99
10 : $325.43
25 : $311.87

PE7004-1

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 1 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 1 dB Fixed Attenuator, N Male to N Female Passivated Stainless Steel Body Rated to 2 Watts Up to 18 GHz. PE7004-1 is a fixed 1 dB attenuator from Pasternack. This 1dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7004-1 1 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7004-1 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 1dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $329.99
10 : $316.79
25 : $303.59

PE7004-8

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 8 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 8 dB Fixed Attenuator, N Male to N Female Passivated Stainless Steel Body Rated to 2 Watts Up to 18 GHz. PE7004-8 is a fixed 8 dB attenuator from Pasternack. This 8dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7004-8 8 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7004-8 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 8dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $280.99
10 : $269.75
25 : $258.51

PE7004-10

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 10 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 10 dB Fixed Attenuator, N Male to N Female Passivated Stainless Steel Body Rated to 2 Watts Up to 18 GHz. PE7004-10 is a fixed 10 dB attenuator from Pasternack. This 10dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7004-10 10 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7004-10 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 10dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
RoHS : Compliant

1 : $355.99
10 : $341.75
25 : $327.51

PE7004-20

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 20 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 20 dB Fixed Attenuator, N Male to N Female Passivated Stainless Steel Body Rated to 2 Watts Up to 18 GHz. PE7004-20 is a fixed 20 dB attenuator from Pasternack. This 20dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7004-20 20 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7004-20 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 20dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $453.99
10 : $435.83
25 : $417.67

PE7004-5

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 5 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 5 dB Fixed Attenuator, N Male to N Female Passivated Stainless Steel Body Rated to 2 Watts Up to 18 GHz. PE7004-5 is a fixed 5 dB attenuator from Pasternack. This 5dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7004-5 5 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7004-5 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 5dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $380.99
10 : $365.75
25 : $350.51

PE7004-15

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 15 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 15 dB Fixed Attenuator, N Male to N Female Passivated Stainless Steel Body Rated to 2 Watts Up to 18 GHz. PE7004-15 is a fixed 15 dB attenuator from Pasternack. This 15dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7004-15 15 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7004-15 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 15dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $333.99
10 : $320.63
25 : $307.27

PE3TC0700-48

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.4mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-VNA-HF, RF Cable Type: PE-VNA-HF, RF Cable Impedance: 50 Ohm, Length: 48 inches. 2.4mm Male to 2.4mm Male Right Angle Precision Cable 48 Inch Length Using High Flex VNA Test Coax, RoHS., Radio frequency assembly 2.4mm male to 2.4mm male right angle precision cable 48 inch length using high flex VNA test coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.4mm male to 2.4mm male right angle precision cable 48 inch length using high flex VNA test coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax precision cable assembly is built with 2.4mm cable connection on one end and right angle 2.4mm cable connection on the other. Our precision 2.4mm to right angle 2.4mm cable assemblies have a male gender on end 1 and male on end 2. This 2.4mm to 2.4mm cable is a male to male coax assembly, PE3TC0700-48, can also be known as a precision 2.4mm plug to right angle 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3TC0700-48 is built with PE-VNA-HF which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to right angle 2.4mm cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 50 GHz maximum frequency 2.4mm male to 2.4mm right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3TC0700-48 can also be used in the other direction and will be right angle 2.4mm male to 2.4mm male cable assembly if the opposite connectivity is required. Precision 2.4mm plug to 2.4mm right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male right angle precision cable 48 inch length using high flex VNA test coax, RoHS.

1 : $3,550.0
25 : $3,372.5
50 : $3,195.0

PE3C6700-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. BNC Male to UHF Male Low Loss Cable 48 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly BNC male to UHF male low loss cable 48 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to UHF male low loss cable 48 inch length using LMR-400 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to UHF cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a UHF cable connection on the other. Our low loss a BNC to a UHF cable assembly has male gender on end 1 and male on end 2. PE3C6700-48 can also be known as a low loss BNC plug to UHF plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C6700-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. BNC plug to UHF plug cable assembly PE3C6700-48 is built with LMR-400 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to UHF cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C6700-48 can also be used in the other direction and will be UHF male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to UHF plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to UHF cable assembly for quick shipment worldwide. Variations of BNC and UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to UHF low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $93.09
25 : $88.44
50 : $83.78
100 : $80.06

PE19XC7004

Pasternack Enterprises

1 : $4,170.0
5 : $4,003.2
10 : $3,836.4

PE3C7004

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: LMR-200-FR, RF Cable Type: LMR-200-FR, RF Cable Impedance: 50 Ohm.

PE3W17004

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. N Female Bulkhead to TNC Male Cable Using RG316-DS Coax. PE3W17004 is a N female bulkhead to TNC male cable using RG316-DS coax. This Pasternack N female bulkhead to TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our female N bulkhead to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17004 N female bulkhead to TNC male cable assembly is constructed with RG316-DS coax.

PE7004-6

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 6 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 6 dB Fixed Attenuator, N Male to N Female Passivated Stainless Steel Body Rated to 2 Watts Up to 18 GHz. PE7004-6 is a fixed 6 dB attenuator from Pasternack. This 6dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7004-6 6 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7004-6 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 6dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $350.99
10 : $336.95
25 : $322.91

Teledyne HiRel

5962-88670043A

Teledyne HiRel

PROG. LOGIC DEVICE, 22-INPUT 10-OUTPUT, 20 NS
RoHS : Not Compliant

5962-8867004KA

Teledyne HiRel

PROG. LOGIC DEVICE, 22-INPUT 10-OUTPUT, 20 NS
RoHS : Not Compliant

5962-8867004LA

Teledyne HiRel

PROG. LOGIC DEVICE, 22-INPUT 10-OUTPUT, 20 NS
RoHS : Not Compliant

Waytek, Inc.

19137-0041

Molex

12-10 GA # 10 Block Spade Terminal Nylon Extra Sleeve BRASS SUPPORT SLEEVE

50 : $0.3425
200 : $0.3245
500 : $0.302
1,000 : $0.29

12,905

297004.WXNV

Littelfuse Inc

4 Amp Mini Automotive Fuse Pink 32V

50 : $0.1419
200 : $0.1303
500 : $0.1151
1,000 : $0.099
5,000 : $0.0944

10,889

67004-0016

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #16 Band 1/2" 11/16" TO 1-1/2"

10 : $1.9746
50 : $1.7625
100 : $1.5993
200 : $1.5503
500 : $1.4932
1,000 : $1.436

2,567

67004-0012

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #12 Band 1/2" 1/2" TO 1-1/4"

10 : $1.8745
50 : $1.6662
100 : $1.5119
200 : $1.4657
500 : $1.4117
1,000 : $1.3577

2,486

67004-0010

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #10 Band 1/2" 1/2" TO 1-1/16"

10 : $2.0152
50 : $1.7913
100 : $1.6254
200 : $1.5757
500 : $1.5176
1,000 : $1.4595

1,760

67004-0064

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #64 Band 1/2" disc way, no repl

5 : $3.3002
50 : $2.77
100 : $2.611
200 : $2.4386
500 : $2.3326

1,150

67004-0024

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #24 Band 1/2" 1" TO 2"

10 : $2.1404
50 : $1.9104
100 : $1.7335
200 : $1.6804
500 : $1.6185
1,000 : $1.5566

1,053

670040032052

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #32 Band 1/2" 1-1/2" TO 2-1/2"

10 : $2.2086
50 : $1.9632
100 : $1.7814
200 : $1.7268
500 : $1.6632
1,000 : $1.5996

993

67004-0020

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #20 Band 1/2" 3/4" TO 1-3/4"

10 : $2.048
50 : $1.8205
100 : $1.6519
200 : $1.6014
500 : $1.5423
1,000 : $1.4833

867

67004-0008

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #8 Band 1/2" 7/16 TO 1N

10 : $1.9116
50 : $1.6992
100 : $1.5419
200 : $1.4947
500 : $1.4397
1,000 : $1.3846

817

67004-0044

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #44 Band 1/2" 1-1/4" TO 3-1/4"

10 : $2.4285
50 : $2.1686
100 : $1.9687
200 : $1.8989
500 : $1.8389
1,000 : $1.7688

500

670040036052

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #36 Band 1/2" 3/4" TO 2-3/4"

10 : $2.4247
50 : $2.1554
100 : $1.9558
200 : $1.896
500 : $1.826
1,000 : $1.7563

445

67004-0056

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #56 Band 1/2" 2" TO 4"

5 : $3.1911
50 : $2.6805
100 : $2.5017
200 : $2.3486
500 : $2.2465

420

67004-0028

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #28 Band 1/2" 1-1/4" TO 2-1/4"

10 : $2.1577
50 : $1.9258
100 : $1.7476
200 : $1.694
500 : $1.6316
1,000 : $1.5692

15370042

Aptiv PLC

CRIMPER-800 SERIES 15370042

1 : $360.09
10 : $338.48

Wuhan P&S

BAS70-04-HE3-08

Vishay Intertechnologies

70V, 200mA, Single&Dual Small Signal Schottky Diodes
RoHS : Compliant

1 : $0.1112
100 : $0.0393
500 : $0.0288
1,000 : $0.0262

999,000

BAS70-04LT1G

onsemi

Dual Series Schottky Barrier Diode
RoHS : Compliant

1 : $0.05
100 : $0.03
500 : $0.03
1,000 : $0.03

84,000

7004-01-MS-A2-R1 revendeur

Lien URL