638G19-R Price, revendeur, Stock

Key Specifications, Polarity: Standard, Connector Series: SMA, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Right Angle, Attachment Method: Crimp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 12.4 GHz, Interface Type 1: PE-C240, Interface Type 2: RG8X, Interface Type 3: .240 inch, Interface Type 4: LMR-240, Interface Type 5: LMR-240-DB, Interface Type 6: LMR-240-UF. SMA Male Right Angle Connector Crimp/Solder Attachment for PE-C240, RG8X, .240 inch, LMR-240, LMR-240-DB, LMR-240-UF. PE44638 SMA male right angle coaxial connector has an interface type of SMA male which is compatible with PE-C240, RG8X, .240 inch, LMR®-240, LMR®-240-DB and LMR®-240-UF cables and has an impedance of 50 Ohms. Pasternack’s SMA male connector uses crimp/solder as an attachment method. Our male SMA right angle coaxial connector provides a maximum frequency of 12.4 GHz. This SMA male RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online cable creator. The Pasternack right angle SMA male coaxial connector has a PTFE dielectric type. Pasternack’s SMA coaxial connector has a brass body with gold plating. Our PE44638 SMA right angle connector uses a gold-plated brass contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. Our high-quality PE44638 features a 3 µin minimum body plating specification. The PE44638 SMA connector operates at a temperature range of -65 to 165 deg C. This right angle SMA connector has a gold inner contact plating. Our right angle SMA male connector has a length of 0.91 inches, a width of 0.379 inches, and a weight of 0.023 lbs. This threaded SMA male coaxial connector features a gold plated brass coupling nut. This Pasternack right angle male SMA connector will ship the same business day as purchased. Our SMA right angle male connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements. * LMR® is a registered trademark of Times Microwave Systems.

1 : $69.59
25 : $66.11
50 : $62.63
100 : $59.85

1,006

PE3C6381-200CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-375-LLPL, RF Cable Type: SPP-375-LLPL, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. Plenum 4.3-10 Male to 7/16 DIN Female Low PIM Cable 200 cm Length Using SPP-375-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male to 7/16 DIN female low PIM cable 200 cm length using SPP-375-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male to 7/16 DIN female low PIM cable 200 cm length using SPP-375-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-375-4310M-LP 4.3-10 to TC-SPP375-716F-LP 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-375-4310M-LP 4.3-10 cable connection on one end and TC-SPP375-716F-LP 7/16 DIN cable connection on the other. Our low PIM TC-375-4310M-LP 4.3-10 to TC-SPP375-716F-LP 7/16 DIN cable assemblies have a male gender on end 1 and female on end 2. This TC-375-4310M-LP 4.3-10 to TC-SPP375-716F-LP 7/16 DIN cable is a male to female coax assembly, PE3C6381-200CM, can also be known as a low PIM TC-375-4310M-LP 4.3-10 plug to TC-SPP375-716F-LP 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. TC-375-4310M-LP 4.3-10 plug to TC-SPP375-716F-LP 7/16 DIN jack cable assembly PE3C6381-200CM is built with SPP-375-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-375-4310M-LP 4.3-10 cable assembly is manufactured with TC-375-4310M-LP 4.3-10 to TC-SPP375-716F-LP 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM TC-375-4310M-LP 4.3-10 male to TC-SPP375-716F-LP 7/16 DIN female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6381-200CM can also be used in the other direction and will be TC-SPP375-716F-LP 7/16 DIN female to TC-375-4310M-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-375-4310M-LP 4.3-10 plug to TC-SPP375-716F-LP 7/16 DIN jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-375-4310M-LP 4.3-10 to TC-SPP375-716F-LP 7/16 DIN cable assembly for quick shipment worldwide. Variations of TC-375-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male to 7/16 DIN female low PIM cable 200 cm length using SPP-375-LLPL coax using Times Microwave parts.

1 : $177.99
25 : $169.09
50 : $160.19
100 : $153.07

PE3C6380-36

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-375-LLPL, RF Cable Type: SPP-375-LLPL, RF Cable Impedance: 50 Ohm, Length: 36 inches. Plenum 4.3-10 Male to 4.3-10 Male Low PIM Cable 36 Inch Length Using SPP-375-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male to 4.3-10 male low PIM cable 36 inch length using SPP-375-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male to 4.3-10 male low PIM cable 36 inch length using SPP-375-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-375-4310M-LP 4.3-10 to TC-375-4310M-LP 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-375-4310M-LP 4.3-10 cable connection on one end and TC-375-4310M-LP 4.3-10 cable connection on the other. Our low PIM TC-375-4310M-LP 4.3-10 to TC-375-4310M-LP 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This TC-375-4310M-LP 4.3-10 to TC-375-4310M-LP 4.3-10 cable is a male to male coax assembly, PE3C6380-36, can also be known as a low PIM TC-375-4310M-LP 4.3-10 plug to TC-375-4310M-LP 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. TC-375-4310M-LP 4.3-10 plug to TC-375-4310M-LP 4.3-10 plug cable assembly PE3C6380-36 is built with SPP-375-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-375-4310M-LP 4.3-10 cable assembly is manufactured with TC-375-4310M-LP 4.3-10 to TC-375-4310M-LP 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM TC-375-4310M-LP 4.3-10 male to TC-375-4310M-LP 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-375-4310M-LP 4.3-10 plug to TC-375-4310M-LP 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-375-4310M-LP 4.3-10 to TC-375-4310M-LP 4.3-10 cable assembly for quick shipment worldwide. Variations of TC-375-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male to 4.3-10 male low PIM cable 36 inch length using SPP-375-LLPL coax using Times Microwave parts.

1 : $149.99
25 : $142.49
50 : $134.99
100 : $128.99

PE3C6380-12

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-375-LLPL, RF Cable Type: SPP-375-LLPL, RF Cable Impedance: 50 Ohm, Length: 12 inches. Plenum 4.3-10 Male to 4.3-10 Male Low PIM Cable 12 Inch Length Using SPP-375-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male to 4.3-10 male low PIM cable 12 inch length using SPP-375-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male to 4.3-10 male low PIM cable 12 inch length using SPP-375-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPO375-4310M-LP 4.3-10 to TC-SPO375-4310M-LP 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPO375-4310M-LP 4.3-10 cable connection on one end and TC-SPO375-4310M-LP 4.3-10 cable connection on the other. Our low PIM TC-SPO375-4310M-LP 4.3-10 to TC-SPO375-4310M-LP 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This TC-SPO375-4310M-LP 4.3-10 to TC-SPO375-4310M-LP 4.3-10 cable is a male to male coax assembly, PE3C6380-12, can also be known as a low PIM TC-SPO375-4310M-LP 4.3-10 plug to TC-SPO375-4310M-LP 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. TC-SPO375-4310M-LP 4.3-10 plug to TC-SPO375-4310M-LP 4.3-10 plug cable assembly PE3C6380-12 is built with SPP-375-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPO375-4310M-LP 4.3-10 cable assembly is manufactured with TC-SPO375-4310M-LP 4.3-10 to TC-SPO375-4310M-LP 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM TC-SPO375-4310M-LP 4.3-10 male to TC-SPO375-4310M-LP 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-SPO375-4310M-LP 4.3-10 plug to TC-SPO375-4310M-LP 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPO375-4310M-LP 4.3-10 to TC-SPO375-4310M-LP 4.3-10 cable assembly for quick shipment worldwide. Variations of TC-SPO375-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male to 4.3-10 male low PIM cable 12 inch length using SPP-375-LLPL coax using Times Microwave parts.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

PE71S6385

Pasternack Enterprises

Key Specifications, Connector Series: N, Connector Gender: Female, Switch Design: Transfer, Minimum Frequency: DC, Maximum Frequency: 12 GHz, Impedance: 50 Ohm, Maximum Input Power (CW): 200 Watts, Maximum VSWR: 1.7:1, Maximum Insertion Loss: 0.7 dB, Minimum Isolation: 60 dB. Transfer Electromechanical Relay Failsafe Switch, DC to 12 GHz, up to 430W, 28V, N. PE71S6385 electromechanical RF relay switch from Pasternack is a Transfer design. Our Transfer electromechanical RF switch uses type N connectors at 50 Ohm. This type N RF relay Transfer switch has a maximum frequency of 12 GHz and maximum power of 200 Watts. The Pasternack radio frequency Transfer N type electro-mechanical relay switch is rated at a control voltage of 28 Volts, indicator voltage and switching speed of 20ms. type N Transfer electro mechanical RF relay switch features with an isolation minimum of 60 dB. Transfer electromechanical relay radio frequency switch PE71S6385 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our Transfer type N coaxial RF relay electromechanical switch can ship worldwide the same day that it is bought as with our other available RF parts.

1 : $1,920.0
5 : $1,843.2
10 : $1,766.4

PE3C2638

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Right Angle Low Loss Cable Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly TNC male to TNC male right angle low loss cable using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male right angle low loss cable using LMR-400 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and right angle TNC cable connection on the other. Our low loss TNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C2638 can also be known as a low loss TNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C2638 is built with LMR-400 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2638 can also be used in the other direction and will be right angle TNC male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male right angle low loss cable using LMR-400 coax with Times Microwave components.

PE3W06387-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Male to TNC Male Low Loss Cable 24 Inch Length Using LMR-200 Coax., Radio frequency assembly TNC male to TNC male low loss cable 24 inch length using LMR-200 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male low loss cable 24 inch length using LMR-200 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our low loss TNC to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3W06387-24 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W06387-24 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. TNC plug to TNC plug cable assembly PE3W06387-24 is built with LMR-200 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $103.99
25 : $98.79
50 : $93.59
100 : $89.43

PE38638-60

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C240, RF Cable Type: PE-C240, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to SMA Female Cable 60 Inch Length Using PE-C240 Coax., Radio frequency assembly SMA male to SMA female cable 60 inch length using PE-C240 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to SMA female cable 60 inch length using PE-C240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE38638-60, can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE38638-60 is built with PE-C240 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38638-60 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female cable 60 inch length using PE-C240 coax.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

PE39638LF-72

Pasternack Enterprises

Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. SSMA Male to BNC Female Cable 72 Inch Length Using RG316 Coax, LF Solder., Radio frequency assembly SSMA male to BNC female cable 72 inch length using RG316 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMA male to BNC female cable 72 inch length using RG316 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMA to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SSMA cable connection on one end and a BNC cable connection on the other. Our SSMA to BNC cable assembly has a male gender on end 1 and a female on end 2. PE39638LF-72 can also be known as a SSMA plug to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE39638LF-72 RF cable has a FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our SSMA male to BNC female cable has a maximum VSWR of 1.4:1. SSMA plug to BNC jack cable assembly PE39638LF-72 is built with RG316 which is a flexible coax type. The Pasternack flexible SSMA cable assembly is manufactured with SSMA to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE39638LF-72 can also be used in the other direction and will be a BNC female to SSMA male cable assembly if the opposite connectivity is required. SSMA plug to BNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMA to BNC cable assembly for quick shipment worldwide. Variations of SSMA and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMA to BNC RF cable assembly as per your requirements.

1 : $93.09
25 : $88.44
50 : $83.78
100 : $80.06

PE3C1638-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P141, RF Cable Type: PE-P141, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Female to SMA Female Cable Using PE-P141 Coax In 48 Inch Length., Radio frequency assembly SMA female to SMA female cable using PE-P141 coax in 48 inch length from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female to SMA female cable using PE-P141 coax in 48 inch length, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE3C1638-48, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE3C1638-48 is built with PE-P141 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 18 GHz maximum frequency SMA female to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to SMA female cable using PE-P141 coax in 48 inch length.

1 : $181.99
25 : $172.89
50 : $163.79
100 : $156.51

PE3C2638/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to TNC Male Low Loss Cable Using LMR-400 Coax with Times Microwave Components with HeatShrink., Radio frequency assembly TNC male right angle to TNC male low loss cable using LMR-400 coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to TNC male low loss cable using LMR-400 coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and TNC cable connection on the other. Our low loss right angle TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C2638/HS can also be known as a low loss right angle TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C2638/HS is built with LMR-400 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC right angle male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2638/HS can also be used in the other direction and will be TNC male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to TNC male low loss cable using LMR-400 coax with Times Microwave components with heatshrink.

PE3W20638

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Jack, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Jack to SMA Male Cable Using LMR-240-UF Coax. PE3W20638 is a reverse polarity TNC jack to SMA male cable using LMR-240-UF coax. This Pasternack reverse polarity TNC jack to SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our reverse polarity jack TNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20638 TNC reverse polarity jack to SMA male cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE71S6389

Pasternack Enterprises

Key Specifications, Connector Series: SMA, Connector Gender: Female, Switch Design: Transfer, Minimum Frequency: DC, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Maximum Input Power (CW): 60 Watts, Maximum VSWR: 1.4:1, Maximum Insertion Loss: 0.5 dB, Minimum Isolation: 60 dB. Transfer Electromechanical Relay Failsafe Switch, DC to 18 GHz, up to 90W, 24V, SMA. PE71S6389 electromechanical RF relay switch from Pasternack is a Transfer design. Our Transfer electromechanical RF switch uses SMA connectors at 50 Ohm. This SMA RF relay Transfer switch has a maximum frequency of 18 GHz and maximum power of 60 Watts. The Pasternack radio frequency Transfer SMA electro-mechanical relay switch is rated at a control voltage of 24 Volts, indicator voltage and switching speed of 20ms. SMA Transfer electro mechanical RF relay switch features with an isolation minimum of 60 dB. Transfer electromechanical relay radio frequency switch PE71S6389 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our Transfer SMA coaxial RF relay electromechanical switch can ship worldwide the same day that it is bought as with our other available RF parts.

1 : $1,330.0
5 : $1,276.8
10 : $1,223.6

PE3W16387

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. BNC Male to Reverse Polarity SMA Female Cable Using LMR-195 Coax. PE3W16387 is a BNC male to reverse polarity SMA female cable using LMR-195 coax. This Pasternack BNC male to reverse polarity SMA female cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. Our male BNC to reverse polarity female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16387 BNC male to SMA reverse polarity female cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE36385/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SSMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SSMB Plug Right Angle to SSMB Plug Cable 12 Inch Length Using RG316 Coax with HeatShrink., Radio frequency assembly SSMB plug right angle to SSMB plug cable 12 inch length using RG316 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMB plug right angle to SSMB plug cable 12 inch length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMB to SSMB cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SSMB cable connection on one end and a SSMB cable connection on the other. Our right angle SSMB to SSMB cable assembly has a plug gender on end 1 and a plug on end 2. PE36385/HS-12 can also be known as a right angle SSMB male to SSMB male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE36385/HS-12 RF cable has a FEP jacket of 0.102-inch diameter. The flexible RF cable has an in-series connection. SSMB male to SSMB male cable assembly PE36385/HS-12 is built with RG316 which is a flexible coax type. The Pasternack flexible SSMB cable assembly is manufactured with right angle SSMB to SSMB cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE36385/HS-12 can also be used in the other direction and will be a SSMB plug to right angle SSMB plug cable assembly if the opposite connectivity is required. SSMB right angle male to SSMB male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMB to SSMB cable assembly for quick shipment worldwide. Variations of SSMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMB to SSMB RF cable assembly as per your requirements.

1 : $160.99
25 : $152.94
50 : $144.89
100 : $138.45

Waytek, Inc.

7100163871

16-14 GA # 8 Snap Spade Nylon Terminal Extra Sleeve BRASS EXTRA SLEEVE

50 : $0.2898
200 : $0.2747
500 : $0.2545
1,000 : $0.2457

14,876

7100163859

16-14 GA #8 Spade Terminal INSULATED VINYL

50 : $0.3936
200 : $0.3638
500 : $0.3307
1,000 : $0.306
5,000 : $0.2916

10,726

7100163866

22-18 GA # 6 Snap Spade Nylon Terminal Extra Sleeve BRASS EXTRA SLEEVE

50 : $0.2822
200 : $0.2671
500 : $0.2482
1,000 : $0.2381

8,890

7100163800

16-14GA Female Disconnect .250 x .032 High Temp Terminal

100 : $0.1932
200 : $0.1753
500 : $0.1567
1,000 : $0.1421
5,000 : $0.1355

5,452

7100163874

12-10 GA # 6 Snap Spade Nylon Terminal Extra Sleeve BRASS EXTRA SLEEVE

25 : $0.54
50 : $0.4824
100 : $0.4374
200 : $0.423
500 : $0.4086
1,000 : $0.3924

4,760

7100163856

22-18 GA #10 Snap Spade VINYL INSULATED TERMINAL

50 : $0.3906
200 : $0.362
500 : $0.3281
1,000 : $0.3038
5,000 : $0.289

3,042

7100163855

22-18 GA #8 Snap Spade VINYL INSULATED TERMINAL

50 : $0.3936
200 : $0.3638
500 : $0.3307
1,000 : $0.306
5,000 : $0.2916

2,647

7100163862

12-10 GA #8 Spade Terminal Insulated Vinyl

50 : $0.5695
200 : $0.5264
500 : $0.4785
1,000 : $0.4428
5,000 : $0.4219

2,585

7100163801

16-14GA Male Disconnect .187 x .020 High Temp Terminal

100 : $0.2124
200 : $0.1927
500 : $0.1723
1,000 : $0.1562
5,000 : $0.1489

2,173

WTU-116-38LC-BULK

NSPA

Non-Insulated Long Neck Ring Terminal 22-18 Ga, #3/8 Stud

20 : $0.459
50 : $0.4091
100 : $0.3712
200 : $0.3591
500 : $0.3469
1,000 : $0.3333

800

7100163832

12-10 GA #6-8-10 Multi-Stud Ring Terminal Insulated Nylon

25 : $0.6909
50 : $0.6152
100 : $0.5584
200 : $0.5395
500 : $0.5229
1,000 : $0.5016

687

63811-1000

Molex

Molex Hand Tool MLX 63811-1000 NON RATCHET
RoHS : Compliant

1 : $80.17
10 : $75.39

63811-5900

Molex

Crimp Tool 33012 Series 16-14GA 63811-5900
RoHS : Compliant

1 : $603.79
10 : $567.32

63811-6000

Molex

Crimp Tool 33012 Series 22-18GA 63811-6000
RoHS : Compliant

1 : $582.92
10 : $561.65

4300-5638

Pressmaster AB

Crimp Dies - Yazaki 2.8 & 6.3 Series for 37867 and 37870, 37879

1 : $84.357
10 : $79.2901

Win Source Electronics

IRM-3638T

Everlight Electronics Co Ltd

RECEIVER MOD IR REMOTE
RoHS : Compliant

3,050 : $0.0985
2,280 : $0.1098
1,765 : $0.1136
1,280 : $0.1174
830 : $0.1212
340 : $0.1477

990,000

TPS63805YFFT

Texas Instruments

IC REG BCK BST ADJ 2A 15DSBGA / Buck-Boost Switching Regulator IC Positive Adjustable 1.8V 1 Output 2A 15-UFBGA, DSBGA
RoHS : Compliant

1,105 : $0.3042
830 : $0.3394
640 : $0.351
465 : $0.3628
300 : $0.3744
125 : $0.4563

642,000

NB6381DL-LF-Z

Monolithic Power Systems

IC REG BUCK ADJ 8A 20QFN
RoHS : Compliant

1,140 : $0.2952
855 : $0.3294
660 : $0.3407
480 : $0.352
310 : $0.3634
130 : $0.4428

80,650

L6387ED013TR

STMicroelectronics

IC DRIVER HI/LO SIDE HV 8-SOIC
RoHS : Compliant

290 : $1.0407
220 : $1.1608
170 : $1.2008
125 : $1.2408
80 : $1.2808
35 : $1.561

45,230

LM3638A0RDYFDR

Texas Instruments

IC LED DRIVER 9DSBGA

335 : $1.0058
270 : $1.0466
210 : $1.0875
145 : $1.1693
95 : $1.2102
45 : $1.2919

24,880

TM1638

2,010 : $0.1496
1,500 : $0.1668
1,160 : $0.1726
845 : $0.1783
545 : $0.1841
225 : $0.2243

24,837

LTC3638EMSE#PBF

Analog Devices Inc

IC REG BUCK ADJ 250MA 16MSOP
RoHS : Compliant

65 : $4.6591
52 : $4.8485
40 : $5.0379
28 : $5.4167
18 : $5.6061
9 : $5.9849

13,530

AD8638ARJZ-REEL

Analog Devices Inc

RoHS : Compliant

137 : $2.4674
110 : $2.5676
84 : $2.668
59 : $2.8685
38 : $2.9688
18 : $3.1694

9,740

L6387DTR

STMicroelectronics

IC DRIVER HIGH/LOW SIDE HV 8SOIC

290 : $1.3525
215 : $1.5085
170 : $1.5606
125 : $1.6126
80 : $1.6647
35 : $2.0287

9,390

TLV5638ID

Texas Instruments

IC 12 BIT 1-3.5US DAC S/O 8-SOIC
RoHS : Compliant

17 : $18.5256
13 : $20.6631
10 : $21.3757
7 : $22.0882
5 : $22.8007
2 : $27.7883

8,300

LT8638SEV#PBF

Analog Devices Inc

40V/10A SYNCHRONOUS BUCK SILENT / Buck Switching Regulator IC Positive Adjustable 0.6V 1 Output 12A 28-TFQFN Exposed Pad
RoHS : Compliant

22 : $13.9773
18 : $14.5455
14 : $15.1137
10 : $16.2501
6 : $16.8182
3 : $17.9546

6,460

1376382-1

TE Connectivity

CONN HEADER VERT 2POS 5MM / Connector Header Through Hole 2 position 0.197" (5.00mm)
RoHS : Compliant

2,500 : $0.1202
1,865 : $0.1341
1,445 : $0.1387
1,050 : $0.1433
680 : $0.1479
280 : $0.1803

6,402

LTC3638HMSE#PBF

Analog Devices Inc

IC REG BUCK ADJ 250MA 16MSOP / Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 250mA 16-TFSOP (0.118", 3.00mm Width), 12 Leads, Exposed Pad
RoHS : Compliant

48 : $6.3031
36 : $7.0304
28 : $7.2728
20 : $7.5152
13 : $7.7576
6 : $9.4546

4,740

LTC3638HMSE#TRPBF

Analog Devices Inc

IC REG BUCK ADJ 250MA 16MSOP / Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 250mA 16-TFSOP (0.118", 3.00mm Width), 12 Leads, Exposed Pad
RoHS : Compliant

48 : $6.3031
36 : $7.0304
28 : $7.2728
20 : $7.5152
13 : $7.7576
6 : $9.4546

4,580

LTM4638IY

Analog Devices Inc

20VIN, 15A STEP-DOWN DC/DC UMODU / Non-Isolated PoL Module DC DC Converter 1 Output 0.6 ~ 5.5V 15A 3.1V - 20V Input
RoHS : Not Compliant

8 : $39.394
6 : $43.9394
5 : $45.4546
4 : $46.9697
3 : $48.4849
1 : $59.091

3,500

638G19-R revendeur

Lien URL