| Moteur de recherche de fiches techniques de composants électroniques |
|
4863-S16-R revendeur |
| revendeur | No de pièce | Fabricant | Description | Price | Qty. BuyNow | |
![]() Avnet Americas | TDA4863GXUMA2![]() | Infineon Technologies AG | Power Factor Correction CONTRLR 0.02mA 8-Pin DSO - Tape and Reel (Alt: TDA4863GXUMA2) RoHS : Compliant |
| 7,500 | |
| 2-644486-3 | TE Connectivity | - Bag (Alt: 2-644486-3) RoHS : Compliant |
| 300 | ||
| C10-737486-3AS3 | Amphenol Corporation | - Bag (Alt: C10-737486-3AS3) RoHS : Not Compliant | 50 | |||
| C10-737486-3YS4 | Amphenol Corporation | - Bag (Alt: C10-737486-3YS4) RoHS : Not Compliant | 46 | |||
| C10-737486-3AS4 | Amphenol Corporation | - Bag (Alt: C10-737486-3AS4) RoHS : Not Compliant | 37 | |||
| C10-737486-3YS3 | Amphenol Corporation | - Bag (Alt: C10-737486-3YS3) RoHS : Not Compliant | 37 | |||
| FAN48630UC315X | onsemi | - Tape and Reel (Alt: FAN48630UC315X) RoHS : Not Compliant |
| 0 | ||
| 8-146486-3 | TE Connectivity | - Bulk (Alt: 8-146486-3) RoHS : Compliant | 0 | |||
| SGM4863YPTS20G/TR | SG Micro Corp | Audio Amplifier Headphone/Speaker 2-CH Stereo 3.2W 20-Pin TSSOP EP T/R - Tape and Reel (Alt: SGM4863YPTS20G/TR) RoHS : Compliant |
| 0 | ||
| SIT1408BC-13-33N-44.863400D | SiTime Corporation | OSCILLATOR, SIT1408, -20 to 70C, 2520, 50ppm, 3.3V, 44.8634MHz, OE, T&R - Tape and Reel (Alt: SIT1408BC-13-33N-44.863400D) RoHS : Compliant |
| 0 | ||
| 0724863001 | TE Connectivity | Sleeving Braid Copper 50m Bag - Tape and Reel (Alt: 0724863001) RoHS : Not Compliant |
| 0 | ||
| 5159009486354611LF | Amphenol Corporation | - Trays (Alt: 5159009486354611LF) RoHS : Compliant |
| 0 | ||
| MAL214863223E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor, 22000 uF, 6.3 V, ? 20%, 3000 hours @ 105?C, Radial Leaded - Bulk (Alt: MAL214863223E3) RoHS : Compliant |
| 0 | ||
| 5159009486394111LF | Amphenol Corporation | - Trays (Alt: 5159009486394111LF) RoHS : Compliant |
| 0 | ||
| 1148630000 | Weidmüller Interface GmbH & Co. KG | Connector Wire to Board Male Header 2 Position 5.08mm Straight Solder Through Hole Black Box - Bulk (Alt: 1148630000) RoHS : Not Compliant |
| 0 | ||
![]() Newark | 284863-1 | TE Connectivity | Single Wire Seal, Orange, Silicone; |Te Connectivity Amp 284863-1 RoHS : Compliant |
| 22,843 | |
| MP014863 | SPC Multicomp | Conn Housing, Rcpt, 5Pos, 1Row, 1.25Mm; |Multicomp Pro MP014863 RoHS : Compliant |
| 3,000 | ||
| 2-644486-3 | TE Connectivity | Conn, Header, 3Pos, 1Row, 2.54Mm; |Te Connectivity Amp 2-644486-3 RoHS : Compliant |
| 2,957 | ||
| 014.86.353 | ETTINGER | Mounting Brackets, 15X12-M3; |Ettinger 014.86.353 RoHS : Compliant |
| 1,809 | ||
| 014.86.313 | ETTINGER | Mounting Brackets, M3-10X11X7.2-Ni; |Ettinger 014.86.313 RoHS : Compliant |
| 1,656 | ||
| 354863-E | TE Connectivity | Microstac Rohs Compliant: Yes |Te Connectivity Erni 354863-E RoHS : Compliant |
| 1,250 | ||
| 0054486399 | Weller Hand Tools GmbH | Xnt Kn Soldering Tip 2.0Mm; |Weller (Apex Tool Group) 0054486399 RoHS : Compliant |
| 428 | ||
| 354863-E | TE Connectivity | Microstac; |Te Connectivity Erni 354863-E RoHS : Compliant |
| 400 | ||
| 2-644486-3 | TE Connectivity | Wire-Board Connector Header 3 Position, 2.54Mm; Connector Systems:Wire-To-Board; Pitch Spacing:2.54Mm; No. Of Rows:1Rows; No. Of Contacts:3Contacts; Contact Termination Type:Through Hole Straight; Product Range:Mta-100 Series Rohs Compliant: Yes RoHS : Compliant |
| 103 | ||
| MKP1848630094Y2 | Vishay Intertechnologies | Film Capacitor, 30Uf, 900V, Radial; |Vishay MKP1848630094Y2 RoHS : Compliant |
| 45 | ||
| MKP1848630924Y5 | Vishay Intertechnologies | Film Capacitor, 30Uf, 1.2Kv, Radial; |Vishay MKP1848630924Y5 RoHS : Compliant |
| 30 | ||
| FMCA2486-36 | Fairview Microwave Inc | Coax Cable Assembly; |Fairview Microwave FMCA2486-36 RoHS : Not Compliant |
| 16 | ||
| 20848-636 | nVent Schroff | Rear Panel, 128.4Mm X 426.4Mm, Aluminium; Panel Type:Rear Panel; Rack U Height:3U; Panel Material:Aluminum; Body Color:-; For Use With:Ratiopacpro Desktop Cases; External Height - Metric:128.4Mm; External Width - Metric:426.4Mm Rohs Compliant: Yes RoHS : Compliant |
| 14 | ||
| 4863 | Keystone Electronics Corp | Broaching Type Force-Fit Threaded Stando; |Keystone 4863 RoHS : Compliant |
| 0 | ||
| 4863 | Adafruit Industries | Adafruit Cyberdeck Hat For Raspberry Pi 400 & 500 |Adafruit 4863 RoHS : Not Compliant |
| 0 | ||
![]() RS | 486306 | RS Pro | MANUAL BALL VALVE 2-WAY NICKEL PLATED BRASS 22MM BSPP COMPRESSION 232PSI |
| 94 | |
| 4548-632-SS | RAF Electronic Hardware | STANDOFF; 1/4 HEX MALE/FEMALE; 6-32 THREAD;STAINLESS STEEL; 1.375LENGTH |
| 51 | ||
| 5448637 (BCP-508- 4 GN) | Phoenix Contact | PCB CONNECTOR PLUG SCREW 5.08MM 12AWG 320V 12A 4 POSITION |
| 48 | ||
| 486344 | RS Pro | 28MM MANUAL BALL VALVE NICKEL PLATED BRASS 28 MM BSPP |
| 29 | ||
| 3048632 (UK 10 3-CC HESILED N 600 3POL) | Phoenix Contact | LEVER-TYPE FUSE TERMINAL BLOCK UK SERIES |
| 12 | ||
| 2084863 | RS Pro | H10B TOP ENTRY, HEAVY DUTY POWER CONNECTOR HOUSING, HOOD 2 LOCKING POINTS, M25 |
| 4 | ||
| OT25F3C (1SCA104863R1001) | ABB Low Voltage Products and Systems | MANUAL TRANSFER SWITCH 30A 3 POLES 600VAC, DIN RAIL / PANEL MOUNT , UL508 |
| 3 | ||
| 548630 (ISOTP70M16) | nVent ERIFLEX | INSULATOR ISO TP 70M16 |
| 2 | ||
| 24863 | CR Seals | SINGLE LIP GREASE SEAL, I.D. 2.5 IN, O.D. 3 IN, THICKNESS 0.25 IN |
| 1 | ||
| 486340 | RS Pro | CHROME PLATED BRASS LINE MOUNTING HYDRAULIC BALL VALVE G 3/8 |
| 1 | ||
| 486350 | RS Pro | CHROME PLATED BRASS LINE MOUNTING HYDRAULIC BALL VALVE G 1/2 |
| 1 | ||
| THT-18-486-3 | Brady Worldwide Inc | THERMAL TRANSFER METALLIZED POLYESTER LABEL 1"H X 3"W ROLL OF 3000 LABELS RoHS : Compliant |
| 1 | ||
| BI15U-EM30WD-AN6X-0.2M-RSV 4T (1634863) | TURCK Inc | PROXIMITY SENSOR, UPROX, 15MM SENSING DISTANCENO, NPN, FLUSH MOUNT |
| 1 | ||
| 4863 | Keystone Electronics Corp | STANDOFF, FORCE-FIT, ROUND, THREADED 4-40, LENGTH .250, OD .219, STAINLESS STEEL |
| 0 | ||
| 4863 | Adafruit Industries | ADAFRUIT CYBERDECK HAT FOR RASPBERRY PI 400 |
| 0 | ||
![]() Microchip Technology Inc | 999-48639-002 | Microchip Technology Inc | TIMEPICTRA 2YR SUBSCRIPTION FOR IGM, Projected EOL: - Contact for Pricing | 0 | ||
| 999-48637-002 | Microchip Technology Inc | TIMEPICTRA 2YR SUBSCRIPTION FOR SYNCSERVER, XLI, TP100, 3RD PARTY SNMP, Projected EOL: - Contact for Pricing | 0 | |||
| 999-48630-002 | Microchip Technology Inc | TIMEPICTRA 2YR SUBSCRUPTION FOR PRS (TS3XX0, PRS-4X00, 5071A), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48630-001 | Microchip Technology Inc | TIMEPICTRA 1YR SUBSCRIPTION FOR PRS (TS3XX0, PRS-4X00, 5071A), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48632-003 | Microchip Technology Inc | TIMEPICTRA 3YR SUBSCRIPTION FOR CORE SSU/BITS (TH, SSU 2000), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48630-003 | Microchip Technology Inc | TIMEPICTRA 3YR SUBSCRUPTION FOR PRS (TS3XX0, PRS-4X00, 5071A), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48637-003 | Microchip Technology Inc | TIMEPICTRA 3YR SUBSCRIPTION FOR SYNCSERVER, XLI, TP100, 3RD PARTY SNMP, Projected EOL: - Contact for Pricing | 0 | |||
| 999-48638-001 | Microchip Technology Inc | TIMEPICTRA 1YR SUBSCRIPTION FOR EDGE GRAND MASTER (TP4X00, TP2X00), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48633-001 | Microchip Technology Inc | TIMEPICTRA 1YR SUBSCRIPTION FOR PTP CORE GRAND MASTER (TP 5000), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48631-003 | Microchip Technology Inc | TIMEPICTRA 3YR SUBSCRIPTION FOR EDGE SSU (TP 1X00), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48632-001 | Microchip Technology Inc | TIMEPICTRA 1YR SUBSCRIPTION FOR CORE SSU/BITS (TH, SSU 2000), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48631-001 | Microchip Technology Inc | TIMEPICTRA 1YR SUBSCRIPTION FOR EDGE SSU (TP 1X00), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48638-002 | Microchip Technology Inc | TIMEPICTRA 2YR SUBSCRIPTION FOR EDGE GRAND MASTER (TP4X00, TP2X00), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48633-002 | Microchip Technology Inc | TIMEPICTRA 2YR SUBSCRIPTION FOR PTP CORE GRAND MASTER (TP 5000), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48637-001 | Microchip Technology Inc | TIMEPICTRA 1YR SUBSCRIPTION FOR SYNCSERVER, XLI, TP100, 3RD PARTY SNMP, Projected EOL: - Contact for Pricing | 0 | |||
![]() Rochester Electronics | FAN48630UC315X | onsemi | 2.5MHz, 1500mA, Synchronous TinyBoost™ Regulator with Bypass Mode RoHS : Compliant |
| 36,000 | |
| FAN48630BUC33X | onsemi | Switching Regulator, Current-mode, 1.5A, 3000kHz Switching Freq-Max, PBGA16 RoHS : Compliant |
| 6,000 | ||
| FAN48630BUC31JX | onsemi | 2.5 MHz, 1500 mA, Synchronous TinyBoost Regulator with Bypass Mode RoHS : Compliant |
| 54,358 | ||
| FAN48632UC35X | onsemi | 2.5 MHz, 2.0 A Pulsed-Load Synchronous TinyBoost Regulator with Bypass Mode for GSM PA Supply RoHS : Compliant |
| 240,000 | ||
| FAN48632UC33X | onsemi | 2.5 MHz, 2.0 A Pulsed-Load Synchronous TinyBoost Regulator with Bypass Mode for GSM PA Supply RoHS : Compliant |
| 30,000 | ||
TDA4863GXUMA2![]() | Infineon Technologies AG | Power Factor Controller, PDSO8 RoHS : Compliant |
| 487,888 | ||
TDA4863![]() | Infineon Technologies AG | Power Factor Controller, PDIP8 RoHS : Compliant |
| 640 | ||
| TDA48632XKLA1 | Infineon Technologies AG | Power Factor Controller, PDIP8 RoHS : Compliant |
| 11,393 | ||
| FAN48630BUC31JX | Fairchild Semiconductor Corporation | 2.5 MHz, 1500 mA, Synchronous TinyBoost Regulator with Bypass Mode RoHS : Compliant |
| 73,700 | ||
| FAN48630BUC33X | Fairchild Semiconductor Corporation | Switching Regulator, Current-mode, 1.5A, 3000kHz Switching Freq-Max, PBGA16 RoHS : Compliant |
| 134,729 | ||
| FAN48630BUC3AJX | Fairchild Semiconductor Corporation | Switching Regulator, Current-mode, 1.5A, 3000kHz Switching Freq-Max RoHS : Compliant |
| 18,000 | ||
| FAN48630UC315X | Fairchild Semiconductor Corporation | 2.5MHz, 1500mA, Synchronous TinyBoost™ Regulator with Bypass Mode RoHS : Compliant |
| 347,890 | ||
| FAN48630UC33X | Fairchild Semiconductor Corporation | 2.5MHz, 1500mA, Synchronous TinyBoost™ Regulator with Bypass Mode RoHS : Compliant |
| 86,694 | ||
| FAN48632BUC33X | Fairchild Semiconductor Corporation | 2.5 MHz, 2.0 A Pulsed-Load Synchronous TinyBoost Regulator with Bypass Mode for GSM PA Supply RoHS : Compliant |
| 122,817 | ||
| LM4863N | National Semiconductor Corporation | LM4863 - Boomer Audio Power Series Dual 2.2W Audio Amplifier Plus Stereo Headphone Function RoHS : Not Compliant | 489 | |||
![]() Sager | 4863 | Keystone Electronics Corp | Standoffs & Spacers .25L 4-40 FORCE FIT |
| 0 | |
| IEGHF66-35486-35-UV | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 680486-3 | TE Connectivity | Other Tools HDM 9SMPO055F07OF G | 0 | |||
| 8-146486-3 | TE Connectivity | Headers & Wire Housings 66 MODII HDR DRST UNSHRD STKG RoHS : Compliant | 0 | |||
| 1848639 | Phoenix Contact | Pluggable Terminal Blocks PTS 1 5/12-PH-5 0 CLIP RoHS : Compliant |
| 0 | ||
| 0724863001 | TE Connectivity | Spiral Wraps, Sleeves, Tubing & Conduit RAY-101-40.0(50) RoHS : Compliant |
| 0 | ||
| 848639002 | Molex | Sensor Cables / Actuator Cables MICRO-CHANGE M12 POWER TAP FM | 0 | |||
| 1414863 | Phoenix Contact | Sensor Cables / Actuator Cables 5POS Power Cable Gray 10m RoHS : Compliant |
| 0 | ||
| 5-1589486-3 | TE Connectivity | TE Connectivity STM025L8CN = SMT CONN | 0 | |||
| 5748634-1 | TE Connectivity | D-Sub High Density Connectors E15S CRIMP KIT RoHS : Compliant |
| 0 | ||
| 0848639003 | Molex | Molex MICRO-CHANGE M12 POWER TAP FM | 0 | |||
| CA4-X0-04-486-32A-D | Carling Technologies | Circuit Breakers | 0 | |||
| 1214486-3 | TE Connectivity | Other Tools COVER SHEAR DIE | 0 | |||
| RCV-46404863 | Carling Technologies | Rocker Switches | 0 | |||
| 1589486-3 | TE Connectivity | Headers & Wire Housings STM025L82HN= SMT CON RoHS : Not Compliant | 0 | |||
![]() TME | 5748634-1 | TE Connectivity | Connector: D-Sub HD; PIN: 15; socket; male,female; data transfer RoHS : Compliant |
| 26,270 | |
| 354863-E | TE Connectivity | Connector: PCB to PCB; plug; data; PIN: 10; vertical,straight; SMT RoHS : Compliant |
| 2,600 | ||
| 5748636-1 | TE Connectivity | Connector: D-Sub HD; PIN: 44; female; data transfer; straight RoHS : Compliant |
| 1,204 | ||
| 0448.630MR | Littelfuse Inc | Fuse: fuse; 6.1x2.69x2.69mm; ceramic; SMD; 630mA; 125VAC; 125V; 448 RoHS : Compliant |
| 1,069 | ||
| 4863 | BM Group spa | Nut; M63; polyamide; 75mm; grey; Pitch: 1.5 |
| 20 | ||
| 24863-00 | Honeywell Sensing and Control | Sensor: flow |
| 10 | ||
| 4863 | Keystone Electronics Corp | Spacer sleeve; 6.35mm; Int.thread: UNC4-40; cylindrical; push-in |
| 0 | ||
| 1754863 | Phoenix Contact | Connector: pluggable terminal block; plug; female; power supply RoHS : Compliant |
| 0 | ||
| 00486 30 000 500 | RECA | Screw; M6; M6x30; Head: countersunk; Phillips; PH3; steel; zinc |
| 0 | ||
848633-001![]() | TE Connectivity | Heat shrink cap; polyolefine RoHS : Compliant |
| 0 | ||
| 100024863 | Telegartner Karl Gartner GmbH | Connector: SMB; plug; coaxial; angled; 50Ω; soldering; brass |
| 0 | ||
| 11G4863 | Lovato Electric Inc | Auxiliary contacts; side; Contacts: (NC + NO) lagging; Range: 3s |
| 0 | ||
| 1974863 | Phoenix Contact | Connector: pluggable terminal block; plug; power supply; 12A RoHS : Compliant |
| 0 | ||
| 00486 35 000 500 | RECA | Screw; M6; M6x35; Head: countersunk; Phillips; PH3; steel; zinc |
| 0 | ||
| 1.239.4863.11 | HUMMEL AG | Thread adapter; M63; PG48; polypropylene; E-M-PA; Body: black; 15mm |
| 0 | ||
![]() ComSIT USA | TDA48632G | Infineon Technologies AG | POWER FACTOR CONTROLLER IC FOR HIGH POWER FACTOR AND LOW THD Power Factor Controller, BIPolar, PDSO8 RoHS : Compliant | 1,810 | ||
| LM4863MTE | National Semiconductor Corporation | Audio Amplifier, 3.2W, 2 Channel(s), 1 Func, PDSO20 RoHS : Not Compliant | 643 | |||
| LM4863MT | National Semiconductor Corporation | DUAL 2.2W AUDIO AMPLIFIER PLUS STEREO HEADPHONE FUNCTION Audio Amplifier, 1.5W, 2 Channel(s), 1 Func, PDSO20 RoHS : Not Compliant | 404 | |||
| MKP1848635704P5 | Wima | METALLIZED POLYPROPYLENE FILM CAPACITOR Film Capacitor, Polypropylene, 700V, 5% +Tol, 5% -Tol, 35uF, Through Hole Mount RoHS : Compliant | 63 | |||
![]() Interstate Connecting Components | 5159009486354611LF | Amphenol FCi | DIN PWR MALE DIN (PCB, IDC, POWER) RoHS : Compliant |
| 0 | |
848633-001![]() | TE Connectivity | CABLE ENTRY SEALS 848633-001 RoHS : Compliant |
| 0 | ||
| ZPF000000000204863 | TE Connectivity | DMC-MD 24 A-S | 0 | |||
| 5159009486354AAKLF | Amphenol FCi | 5159009486354AAKLF-DIN TYP F R | 0 | |||
| 5159009486394111LF | Amphenol FCi | DIN PWR MALE RoHS : Compliant |
| 0 | ||
| 5748634-1 | TE Connectivity | KITRCPT15PHDP-22SHLD HDWRE RoHS : Compliant |
| 0 | ||
| 2302486-3 | TE Connectivity | PIN CONN CVRASSY,2POS,AMPSEAL1 RoHS : Compliant |
| 0 | ||
| 5-146486-3 | TE Connectivity | 06 MODII HDR DRST UNSHRD STKG RoHS : Compliant |
| 0 | ||
| CF4863-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC82/1812-26-9-9 RoHS : Compliant | 0 | |||
| SA85004863925 | SOURIAU-SUNBANK | 0 | ||||
| 284863-1 | TE Connectivity | SINGLE WIRE SEAL F.EXT.INS.DIA RoHS : Compliant |
| 0 | ||
| 2486356-1 | TE Connectivity | BRACKET PROTECTION PANE BCC | 0 | |||
| 776486-3 | TE Connectivity | AS 16, 4P CAP TPA, KEY 3, YEL |
| 0 | ||
| 172486-3 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| 1743486-3 | TE Connectivity | MTII INJECTOR 2P PLUG ASSY RoHS : Compliant | 0 | |||
![]() NexGen Digital | 4548-632-SS | RAF Electronic Hardware | 24 | |||
![]() PEI Genesis | CA-628486-30807 | Amphenol Corporation |
| 0 | ||
| 21A00486-321616 | SOURIAU-SUNBANK |
| 0 | |||
| 73-2734863-1 | SOURIAU-SUNBANK |
| 0 | |||
| 21A00486-322416 | SOURIAU-SUNBANK |
| 0 | |||
| 21A00486-323216 | SOURIAU-SUNBANK |
| 0 | |||
![]() Chip 1 Exchange | 5748634-1 | TE Connectivity | INSTOCK RoHS : Compliant | 36,263 | ||
| 5159009486394AAKLF | Amphenol Corporation | INSTOCK | 1,956 | |||
| 5748636-1 | TE Connectivity | INSTOCK RoHS : Compliant | 1,591 | |||
| XBT48634-01 | SOLEC | INSTOCK | 1,250 | |||
| LM4863MT | INSTOCK | 369 | ||||
| 48634-01 | INSTOCK | 240 | ||||
| NTD4863NT4G | onsemi | INSTOCK RoHS : Compliant | 238 | |||
| 14.86.313 | ETTGR | INSTOCK | 2 | |||
![]() Avnet Abacus | 848633-001![]() | TE Connectivity | Heat Shrink Boot Straight 16 4064 mm Black 385 978 mm (Alt: 848633-001) RoHS : Compliant | 450 | ||
| 1848639 | Phoenix Contact | PTS 1512PH50 CLIP PTS1512PH50CLIP (Alt: 1848639) RoHS : Compliant | 0 | |||
| 5748634-1 | TE Connectivity | Conn Housing RCP 15 POS Crimp ST Bulk (Alt: 5748634-1) RoHS : Compliant | 0 | |||
| 8-146486-3 | TE Connectivity | (Alt: 8-146486-3) RoHS : Compliant | 0 | |||
| 1748630000 | Weidmüller Interface GmbH & Co. KG | Conn Terminal Block SKT 34 POS 35mm Crimp ST Cable Mount 10A Box (Alt: 1748630000) RoHS : Compliant | 0 | |||
| 0724863001 | TE Connectivity | (Alt: 0724863001) RoHS : Compliant | 0 | |||
| 814863-000 | TE Connectivity | (Alt: 814863-000) RoHS : Compliant | 0 | |||
| 814863-000 | TE Connectivity | (Alt: 814863-000) RoHS : Compliant | 0 | |||
| 1148630000 | Weidmüller Interface GmbH & Co. KG | (Alt: 1148630000) RoHS : Compliant | 0 | |||
| 434863-000 | TE Connectivity | (Alt: 434863-000) RoHS : Compliant | 0 | |||
| 5348633001 | TE Connectivity | (Alt: 5348633001) RoHS : Compliant | 0 | |||
| 4-1393486-3 | TE Connectivity | AMP413934863 (Alt: 4-1393486-3) RoHS : Compliant | 0 | |||
| MAL214863223E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor 22000 uF 63 V 20 3000 hours 105C Radial Leaded (Alt: MAL214863223E3) RoHS : Compliant | 0 | |||
| 5159009486354611LF | Amphenol Corporation | DIN 41612 Connector 5159 Series 48 Contacts Header 508 mm 3 Row z b d (Alt: 5159009486354611LF) RoHS : Compliant | 0 | |||
| 5159009486394111LF | Amphenol Corporation | Conn DIN 41612 M 48 POS 508mm Solder RA ThruHole Box (Alt: 5159009486394111LF) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 2486390-4 | TE Connectivity | (Alt: 2486390-4) RoHS : Compliant | 0 | ||
| 2486390-6 | TE Connectivity | (Alt: 2486390-6) RoHS : Compliant | 0 | |||
| 2486390-3 | TE Connectivity | (Alt: 2486390-3) RoHS : Compliant | 0 | |||
| 2486390-1 | TE Connectivity | (Alt: 2486390-1) RoHS : Compliant | 0 | |||
| 2486390-8 | TE Connectivity | (Alt: 2486390-8) RoHS : Compliant | 0 | |||
| 2486390-5 | TE Connectivity | (Alt: 2486390-5) RoHS : Compliant | 0 | |||
| 2486390-2 | TE Connectivity | (Alt: 2486390-2) RoHS : Compliant | 0 | |||
| 2486390-7 | TE Connectivity | (Alt: 2486390-7) RoHS : Compliant | 0 | |||
![]() Avnet Silica | SLG4AX48636V | Renesas Electronics Corporation | STQFN14 GreenPAK Linwave (Alt: SLG4AX48636V) RoHS : Compliant | 0 | ||
| FAN48630UC33X | onsemi | 25MHz 1500mA Synchronous TinyBoost Regulator with Bypass Mode (Alt: FAN48630UC33X) RoHS : Compliant | 0 | |||
| FAN48632UC33X | onsemi | (Alt: FAN48632UC33X) RoHS : Compliant | 0 | |||
| FAN48630UC50X | onsemi | 25MHz 1500mA Synchronous TinyBoost Regulator with Bypass Mode (Alt: FAN48630UC50X) RoHS : Compliant | 0 | |||
| FAN48630UC37AX | onsemi | 25MHz 1500mA Synchronous TinyBoost Regulator with Bypass Mode (Alt: FAN48630UC37AX) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | LM4863LQ/NOPB![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,275 | |
| LM4863MTE | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 219 | ||
| 3448-63 | 3M | IN STOCK SHIP TODAY |
| 120 | ||
TDA4863G![]() | Infineon Technologies AG | IN STOCK SHIP TODAY RoHS : Compliant |
| 50 | ||
| 748634-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 24 | ||
TDA4863-2G![]() | Infineon Technologies AG | IN STOCK SHIP TODAY RoHS : Compliant |
| 10 | ||
![]() DB Roberts | BSO4-8632-30 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types BSO4 standoffs are for installation into stainless steel sheets as thin as . | 0 | ||
| BSO4-8632-18 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types BSO4 standoffs are for installation into stainless steel sheets as thin as . | 0 | |||
| BSO4-8632-12 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types BSO4 standoffs are for installation into stainless steel sheets as thin as . | 0 | |||
| 4548-632-S-12 | RAF Electronic Hardware | 0 | ||||
| 4548-632-AL-7 | RAF Electronic Hardware | 0 | ||||
| 4548-632-S-1 | RAF Electronic Hardware | 0 | ||||
| BSO4-8632-26 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types BSO4 standoffs are for installation into stainless steel sheets as thin as . | 0 | |||
| 4148-632-A-7 | RAF Electronic Hardware | 0 | ||||
| SO4-8632-16 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types SO4 standoffs are for installation into stainless steel sheets as thin as .0 | 0 | |||
| SO4-8632-18 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types SO4 standoffs are for installation into stainless steel sheets as thin as .0 | 0 | |||
| 4048-632-AL-22 | RAF Electronic Hardware | RD M/F SNDOFFS CLR ANODIZ 1/4 RD X 1-3/8 LTH | 0 | |||
| 1748-632-AL-6 | RAF Electronic Hardware | 0 | ||||
| 464863 | Essentra Components | 0 | ||||
| SO4-8632-14 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types SO4 standoffs are for installation into stainless steel sheets as thin as .0 | 0 | |||
| 4048-632-AL | RAF Electronic Hardware | ROUND MALE-FEMALE STANDOFF | 0 | |||
![]() EBV Elektronik | FAN48630UC37AX | onsemi | 25MHz 1500mA Synchronous TinyBoost Regulator with Bypass Mode (Alt: FAN48630UC37AX) RoHS : Compliant | 0 | ||
| FAN48632BUC33X | onsemi | (Alt: FAN48632BUC33X) RoHS : Compliant | 0 | |||
| SGM4863YTQG20G/TR | SG Micro Corp | (Alt: SGM4863YTQG20G/TR) RoHS : Compliant | 0 | |||
![]() Flip Electronics | FAN48630UC315X | onsemi | Stock, Ship Today RoHS : Compliant |
| 30,000 | |
| FAN48630UC33X | onsemi | Stock, Ship Today RoHS : Compliant |
| 30,000 | ||
| FAN48630UC35X | onsemi | Stock, Ship Today RoHS : Compliant |
| 9,000 | ||
| FAN48632UC35X | onsemi | Stock, Ship Today RoHS : Compliant |
| 3,000 | ||
![]() Master Electronics | 1148630000 | Weidmüller Interface GmbH & Co. KG | Conn Shrouded Header HDR 2 POS 5.08mm Solder ST Thru-Hole Box RoHS : Compliant |
| 40 | |
| 814863-000 | TE Connectivity | 202D932-4-0 RoHS : Compliant |
| 39 | ||
| 0054486399 | Weller Hand Tools GmbH | Xnt Kn Soldering Tip 2.0mm RoHS : Compliant |
| 3 | ||
| 748636-1 | TE Connectivity | Conn Housing RCP 44 POS Crimp ST Bulk RoHS : Not Compliant |
| 0 | ||
| 8-146486-3 | TE Connectivity | 66 MODII HDR DRST UNSHRD STKG MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1848639 | Phoenix Contact | PCB connector - nominal current: 10 A - rated voltage (III/2): 400 V - nominal cross section: 1.5 mm² - number of positions: 12 - pitch: 5 mm - connection method: Push-in spring connection - color: green - contact surface: Tin RoHS : Compliant |
| 0 | ||
| 1748630000 | Weidmüller Interface GmbH & Co. KG | Conn Terminal Block SKT 34 POS 3.5mm Crimp ST Cable Mount 10A Box RoHS : Compliant |
| 0 | ||
| XN-4004-8637-1 | 3M Interconnect | RoHS : Compliant |
| 0 | ||
| 0724863001 | TE Connectivity | RAY-101-40.0(50) MOQ Reduction RoHS : Compliant |
| 0 | ||
| 4548-632-S-12 | RAF Electronic Hardware | 1/4 HEX X 1-3/8 LENGTH RoHS : Compliant |
| 0 | ||
| 1414863 | Phoenix Contact | Power cable - 5-position - PUR halogen-free - gray RAL 7001 - shielded (Advanced Shielding Technology) - Plug angled M12 - L-coded - on free cable end - cable length: 10 m - for direct current up to 16 A/63 V RoHS : Compliant |
| 0 | ||
| 4548-632-B | RAF Electronic Hardware | Standoffs Hex Male-Female M/F 6.4mm 6-32 34.9mm Brass ASTM B16 Nickel RoHS : Compliant |
| 0 | ||
| 4863000 | Marathon Special Products | Fuse Holder 60A 600VDC/600VAC Screw Mount Screw RoHS : Compliant |
| 0 | ||
| 2-0644486-3 | TE Connectivity | Conn Shrouded Header (4 Sides) M 3 POS 2.54mm Solder ST Top Entry Thru-Hole Bag/Box RoHS : Compliant |
| 0 | ||
| 5-1589486-3 | TE Connectivity | STM025L8CN = SMT CONN MOQ Reduction RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C2486-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. SMA Male to SMA Male Low Loss Cable 300 Inch Length Using LMR-240-UF Coax., Radio frequency assembly SMA male to SMA male low loss cable 300 inch length using LMR-240-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable 300 inch length using LMR-240-UF coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2486-300 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C2486-300 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male low loss cable 300 inch length using LMR-240-UF coax. |
| 1,314 | |
| PE7486-30 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 26.5 GHz, Nominal Attenuation: 30 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 20 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 30 dB Fixed Attenuator, SMA Male to SMA Female Black Anodized Aluminum Body Rated to 20 Watts Up to 26.5 GHz. PE7486-30 is a fixed 30 dB attenuator from Pasternack. This 30 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 20 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with black anodized aluminum body material. The connectorized unidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 30 dB fixed attenuator has a gold-plated brass inner conductor. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 30 dB. The Pasternack PE7486-30 attenuator is rated for up to 26.5 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 30 dB attenuator has a brass connector built with nickel plating. Our fixed RF attenuator PE7486-30 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 30 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 7 | ||
| PE3W04863/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. TNC Male to SMA Male Cable Using PE-SR402AL Coax with HeatShrink. PE3W04863/HS is a TNC male to SMA male cable using PE-SR402AL coax. This Pasternack TNC male to SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our male TNC to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W04863/HS TNC male to SMA male cable assembly is constructed with PE-SR402AL coax. | 0 | |||
| PE34863LF | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini UHF, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3W14863/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. N Male to QMA Male Cable Using TFT-5G-402 Coax with HeatShrink. PE3W14863/HS is a N male to QMA male cable using TFT-5G-402 coax. This Pasternack N male to QMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm QMA for connector 2. Our male N to male QMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14863/HS N male to QMA male cable assembly is constructed with TFT-5G-402 coax. | 0 | |||
| PE4863 | Pasternack Enterprises | Key Specifications, Polarity: Reverse Polarity, Connector Series: SMA, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder/Solder, Mount Method: Bulkhead, Interface Type 1: RG178, Interface Type 2: RG196. RP-SMA Female Bulkhead Mount Connector Solder Attachment for RG178, RG196, .235 inch D Hole. PE4863 reverse polarity SMA female bulkhead coaxial connector has an interface type of RG178, RG196 and a 50 Ohm impedance. Pasternack reverse polarity SMA female bulkhead connector uses shield/contact solder/solder as an attachment method. The Pasternack SMA coaxial connector has a brass body with nickel plating. This reverse polarity SMA female bulkhead coaxial RF connector is REACH compliant. This Pasternack reverse polarity female SMA bulkhead connector will ship the same day as purchased. Our bulkhead SMA reverse polarity female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom SMA connector cable assemblies that will ship the same day as well. |
| 0 | ||
| PE34486-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-B100, RF Cable Type: PE-B100, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMC Plug Right Angle to SMC Jack Bulkhead Cable 36 Inch Length Using PE-B100 Coax., Radio frequency assembly SMC plug right angle to SMC jack bulkhead cable 36 inch length using PE-B100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC plug right angle to SMC jack bulkhead cable 36 inch length using PE-B100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMC cable connection on one end and SMC bulkhead cable connection on the other. Our right angle SMC to SMC cable assemblies have a plug gender on end 1 and jack on end 2. This SMC to SMC cable is a plug to jack coax assembly, PE34486-36, can also be known as a right angle SMC male to SMC female cable assembly and will be shipped same-day as it is purchased. SMC male to SMC female cable assembly PE34486-36 is built with PE-B100 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with right angle SMC to SMC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMC right angle plug to SMC jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34486-36 can also be used in the other direction and will be SMC jack bulkhead to right angle SMC plug cable assembly if the opposite connectivity is required. SMC right angle male to SMC female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to SMC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug right angle to SMC jack bulkhead cable 36 inch length using PE-B100 coax. |
| 0 | ||
| PE3C4863 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. Slide-On BMA Plug Bulkhead to TNC Male Cable Using PE-SR405FLJ Coax., Radio frequency assembly slide-on BMA plug bulkhead to TNC male cable using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to TNC male cable using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and TNC cable connection on the other. Our BMA to TNC cable assemblies have a plug gender on end 1 and male on end 2. This BMA to TNC cable is a plug to male coax assembly, PE3C4863, can also be known as a BMA male to TNC plug cable assembly and will be shipped same-day as it is purchased. BMA male to TNC plug cable assembly PE3C4863 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BMA plug bulkhead to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4863 can also be used in the other direction and will be TNC male to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to TNC male cable using PE-SR405FLJ coax. | 0 | |||
| PE3C4863-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 24 inches. Slide-On BMA Plug Bulkhead to TNC Male Cable 24 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly slide-on BMA plug bulkhead to TNC male cable 24 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to TNC male cable 24 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and TNC cable connection on the other. Our BMA to TNC cable assemblies have a plug gender on end 1 and male on end 2. This BMA to TNC cable is a plug to male coax assembly, PE3C4863-24, can also be known as a BMA male to TNC plug cable assembly and will be shipped same-day as it is purchased. BMA male to TNC plug cable assembly PE3C4863-24 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BMA plug bulkhead to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4863-24 can also be used in the other direction and will be TNC male to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to TNC male cable 24 inch length using PE-SR405FLJ coax. |
| 0 | ||
| PE3C4863-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 60 inches. Slide-On BMA Plug Bulkhead to TNC Male Cable 60 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly slide-on BMA plug bulkhead to TNC male cable 60 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to TNC male cable 60 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and TNC cable connection on the other. Our BMA to TNC cable assemblies have a plug gender on end 1 and male on end 2. This BMA to TNC cable is a plug to male coax assembly, PE3C4863-60, can also be known as a BMA male to TNC plug cable assembly and will be shipped same-day as it is purchased. BMA male to TNC plug cable assembly PE3C4863-60 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BMA plug bulkhead to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4863-60 can also be used in the other direction and will be TNC male to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to TNC male cable 60 inch length using PE-SR405FLJ coax. |
| 0 | ||
| PE3W14863 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. N Male to QMA Male Cable Using TFT-5G-402 Coax. PE3W14863 is a N male to QMA male cable using TFT-5G-402 coax. This Pasternack N male to QMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm QMA for connector 2. Our male N to male QMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14863 N male to QMA male cable assembly is constructed with TFT-5G-402 coax. | 0 | |||
| PE3C4863-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 36 inches. Slide-On BMA Plug Bulkhead to TNC Male Cable 36 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly slide-on BMA plug bulkhead to TNC male cable 36 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to TNC male cable 36 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and TNC cable connection on the other. Our BMA to TNC cable assemblies have a plug gender on end 1 and male on end 2. This BMA to TNC cable is a plug to male coax assembly, PE3C4863-36, can also be known as a BMA male to TNC plug cable assembly and will be shipped same-day as it is purchased. BMA male to TNC plug cable assembly PE3C4863-36 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BMA plug bulkhead to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4863-36 can also be used in the other direction and will be TNC male to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to TNC male cable 36 inch length using PE-SR405FLJ coax. |
| 0 | ||
| PE3W04863 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. TNC Male to SMA Male Cable Using PE-SR402AL Coax. PE3W04863 is a TNC male to SMA male cable using PE-SR402AL coax. This Pasternack TNC male to SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our male TNC to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W04863 TNC male to SMA male cable assembly is constructed with PE-SR402AL coax. | 0 | |||
| PE3FCA486-3M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: APC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex LC APC to LC UPC, SM OS2, 2.0mm LSZH, Yellow-3M. Pasternack’s PE3FCA486-3M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 3-meter long simplex cable assembly is equipped with LC/APC to LC/UPC connectors. Our yellow fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA486-3M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA486-3M fiber optic cable with a 2 mm cable diameter and 15 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of simplex LC/APC to LC/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3C4863-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 12 inches. Slide-On BMA Plug Bulkhead to TNC Male Cable 12 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly slide-on BMA plug bulkhead to TNC male cable 12 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to TNC male cable 12 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and TNC cable connection on the other. Our BMA to TNC cable assemblies have a plug gender on end 1 and male on end 2. This BMA to TNC cable is a plug to male coax assembly, PE3C4863-12, can also be known as a BMA male to TNC plug cable assembly and will be shipped same-day as it is purchased. BMA male to TNC plug cable assembly PE3C4863-12 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BMA plug bulkhead to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4863-12 can also be used in the other direction and will be TNC male to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to TNC male cable 12 inch length using PE-SR405FLJ coax. |
| 0 | ||
![]() Vyrian | TDA4863 | NXP Semiconductors | Power Factor Controller, PDIP8 | 12,672 | ||
| NTD4863NA-1G | onsemi | Power Field-Effect Transistor, 9.2A I(D), 25V, 0.014ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 11,760 | |||
| TMC5748639DTR | Texas Instruments | 9,162 | ||||
| 1848639 | Phoenix Contact | Barrier Strip Terminal Block, 10A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 8,764 | |||
LM4863MWC![]() | Texas Instruments | Audio Amplifier, 1.5W, 2 Channel(s), 1 Func | 8,560 | |||
TDA4863GXUMA2![]() | Infineon Technologies AG | Power Factor Controller, PDSO8 RoHS : Compliant | 8,449 | |||
LM4863MDC![]() | Texas Instruments | Audio Amplifier, 1.5W, 2 Channel(s), 1 Func | 6,822 | |||
| 5748634-1 | TE Connectivity | D Subminiature Connector, 15 Contact(s), Receptacle RoHS : Compliant | 6,708 | |||
| CT324863 | Micron Technology, Inc | 5,963 | ||||
TDA4863XKLA1![]() | Infineon Technologies AG | Power Factor Controller, PDIP8 RoHS : Compliant | 5,339 | |||
| 114863 | Micron Technology, Inc | 4,933 | ||||
| 1974863 | Phoenix Contact | Barrier Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 4,526 | |||
| LM4863M | Texas Instruments | Audio Amplifier, 1.5W, 2 Channel(s), 1 Func, PDSO16 | 4,501 | |||
LM4863LQ![]() | Texas Instruments | Audio Amplifier, 3.2W, 2 Channel(s), 1 Func RoHS : Not Compliant | 4,118 | |||
| LM4863N | National Semiconductor Corporation | Audio Amplifier, 1.5W, 2 Channel(s), 1 Func, PDIP16 RoHS : Not Compliant | 3,760 | |||
![]() Waytek, Inc. | 148630-91W | General Cable Technologies Corporation | 10GA SXL Red Cross-Link Automotive Wire XLPE -51C to 125C |
| 12,250 | |
![]() Win Source Electronics | TDA4863-2G![]() | Infineon Technologies AG | Power Factor Controller IC for High Power Factor and Low THD RoHS : Compliant |
| 20,000 | |
| FAN48630BUC31JX | onsemi | IC REG BOOST PROG 1.5A 16WLCSP RoHS : Compliant |
| 15,315 | ||
TDA4863G![]() | Infineon Technologies AG | TDA4863 - PFC-DCM (DISCONTINUOUS RoHS : Compliant |
| 5,772 | ||
TDA4863GXUMA2![]() | Infineon Technologies AG | IC PFC CONTROLLER DCM 8DSO RoHS : Compliant |
| 5,260 | ||
| LN4863M | National Semiconductor Corporation |
| 1,200 | |||
| LN4863MTE | National Semiconductor Corporation |
| 700 |
| ALLDATASHEET vous a-t-il été utile ? [ DONATE ] |
À propos de Alldatasheet | Publicité | Contactez-nous | Politique de confidentialité | Lien vers la fiche technique | Echange de liens | Fabricants All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |