480800ACNSMNFZCWC Price, revendeur, Stock

Key Specifications, Connector 1 Series: Mini SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm. 75 Ohm Mini SMB Plug to 75 Ohm N Male Cable Using 75 Ohm RG59 Coax, LF Solder., Radio frequency assembly 75 Ohm mini SMB plug to 75 Ohm N male cable using 75 Ohm RG59 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm mini SMB plug to 75 Ohm N male cable using 75 Ohm RG59 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMB to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMB cable connection on one end and a type N cable connection on the other. Our mini SMB to type N cable assembly has a plug gender on end 1 and a male on end 2. PE34808LF can also be known as a mini SMB male to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. Our PE34808LF RF cable has a PVC (NC) jacket of 0.242-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -25 to 70 degrees C. The flexible RF cable has a between series connection. Our Mini SMB plug to type N male cable has a maximum VSWR of 1.4:1. Mini SMB male to type N plug cable assembly PE34808LF is built with RG59 which is a flexible coax type. The Pasternack flexible Mini SMB cable assembly is manufactured with mini SMB to type N cable connectors, has a 75 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE34808LF can also be used in the other direction and will be a type N male to mini SMB plug cable assembly if the opposite connectivity is required. Mini SMB male to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMB to type N cable assembly for quick shipment worldwide. Variations of mini SMB and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal Mini SMB to type N RF cable assembly as per your requirements.

PE48080

Pasternack Enterprises

1 : $268.33
25 : $254.91
50 : $241.5
100 : $230.76

PE48082

Pasternack Enterprises

1 : $292.14
25 : $277.53
50 : $262.93
100 : $251.24

PE48081

Pasternack Enterprises

1 : $285.41
25 : $271.14
50 : $256.87
100 : $245.45

PE48087

Pasternack Enterprises

1 : $395.18
25 : $375.42
50 : $355.66
100 : $339.85

PE48086

Pasternack Enterprises

1 : $394.76
25 : $375.02
50 : $355.28
100 : $339.49

PE3C4808

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. N Female to Straight Cut Lead Cable Using RG213 Coax., Radio frequency assembly N female to straight cut lead cable using RG213 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N female to straight cut lead cable using RG213 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and straight cut lead cable connection on the other. Our type N to straight cut lead cable assemblies have a female gender on end 1 and sexless on end 2. This N type to straight cut lead cable is a female to sexless coax assembly, PE3C4808, can also be known as a type N jack to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. Type N jack to straight cut lead sexless cable assembly PE3C4808 is built with RG213 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to straight cut lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this N type female to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4808 can also be used in the other direction and will be straight cut lead sexless to type N female cable assembly if the opposite connectivity is required. Type N jack to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to straight cut lead cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female to straight cut lead cable using RG213 coax.

PE48089

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: 1.0mm, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Field Replaceable, Mount Method: 4 Hole Flange, Minimum Frequency: DC, Maximum Frequency: 110 GHz, Interface Type 1: accepts 0.23mm (.009inch) pin. 1.0mm Female Field Replaceable Connector 4 Hole Flange Mount accepts 0.23mm (.009inch) pin, .25 inch Hole Spacing with Metal Contact Ring. PE48089 1.0mm female 4 hole flange mount connector has an interface type of 1.0mm female, which accepts 0.23mm (.009inch) pin, and has an impedance of 50 Ohms. Our female 1.0mm connector provides a maximum frequency of 110 GHz. This 1.0mm female RF connector is stocked to be readily available for same business day shipment and can also be designed onto custom cable configurations using our online cable creator. The Pasternack 1.0mm female 4 hole flange mount connector has a PEI dielectric type and a VSWR of 1.25:1. Pasternack’s 1.0mm connector has a passivated stainless steel body. Our PE48089 1.0mm connector uses a beryllium copper inner contact and a passivated stainless steel outer contact. The Pasternack RF connector has a maximum inner and outer conductor resistance of 4 mOhms and 1 mOhm, respectively. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from passivated stainless steel material has a contact life of 500 cycles or more. The PE48089 1.0mm 4 hole flange mount connector operates at a temperature range of -55 to 105 deg C. This 1.0mm connector has a gold over nickel alloy over copper inner contact plating. The Pasternack 1.0mm female connector has a maximum operating voltage of 150 Vrms and a dielectric withstanding voltage of 500 Vrms. This RF connector comes with a minimum insulation resistance of 5,000 MOhms. Our 1.0mm female connector has a length of 0.377 inches, a width of 0.374 inches, and a weight of 0.05 lbs. This Pasternack female 1.0mm 4 hole flange mount connector will ship the same business day as purchased. Our 4 hole flange mount 1.0mm female connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements.

1 : $279.99
5 : $274.39
10 : $268.79
25 : $263.19

PE3W14808

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. SMA Male to SMP Female Right Angle Cable Using PE-SR405FL Coax. PE3W14808 is a SMA male to SMP female right angle cable using PE-SR405FL coax. This Pasternack SMA male to SMP female right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMP for connector 2. SMA to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to female SMP right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W14808 SMA male to SMP female right angle cable assembly is constructed with PE-SR405FL coax.

PE48088

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: 1.0mm, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Field Replaceable, Mount Method: 2 Hole Flange, Minimum Frequency: DC, Maximum Frequency: 110 GHz, Interface Type 1: accepts 0.23mm (.009inch) pin. 1.0mm Female Field Replaceable Connector 2 Hole Flange Mount accepts 0.23mm (.009inch) pin, .28 inch Hole Spacing with Metal Contact Ring. PE48088 1.0mm female 2 hole flange mount connector has an interface type of 1.0mm female, which accepts 0.23mm (.009inch) pin, and has an impedance of 50 Ohms. Our female 1.0mm connector provides a maximum frequency of 110 GHz. This 1.0mm female RF connector is stocked to be readily available for same business day shipment and can also be designed onto custom cable configurations using our online cable creator. The Pasternack 1.0mm female 2 hole flange mount connector has a PEI dielectric type and a VSWR of 1.25:1. Pasternack’s 1.0mm connector has a passivated stainless steel body. Our PE48088 1.0mm connector uses a beryllium copper inner contact and a passivated stainless steel outer contact. The Pasternack RF connector has a maximum inner and outer conductor resistance of 4 mOhms and 1 mOhm, respectively. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from passivated stainless steel material has a contact life of 500 cycles or more. The PE48088 1.0mm 2 hole flange mount connector operates at a temperature range of -55 to 105 deg C. This 1.0mm connector has a gold over nickel alloy over copper inner contact plating. The Pasternack 1.0mm female connector has a maximum operating voltage of 150 Vrms and a dielectric withstanding voltage of 500 Vrms. This RF connector comes with a minimum insulation resistance of 5,000 MOhms. This Pasternack female 1.0mm 2 hole flange mount connector will ship the same business day as purchased. Our 2 hole flange mount 1.0mm female connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements.

1 : $279.99
5 : $274.39
10 : $268.79
25 : $263.19

PE34808/WH

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: Mini SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG59-WHITE, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm. 75 Ohm N Male to 75 Ohm Mini SMB Plug Cable Using 75 Ohm RG59-WHITE White Coax. PE34808/WH is a N male to Mini SMB plug cable using RG59 coax. This Pasternack N male to Mini SMB plug cable assembly uses a 75 Ohm N for connector 1 and a 75 Ohm Mini SMB for connector 2. Our male N to plug Mini SMB cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE34808/WH N male to Mini SMB plug cable assembly is constructed with RG59 coax.

PE3W24808

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. SMA Female to 7/16 DIN Male Cable Using RG213 Coax. PE3W24808 is a SMA female to 7/16 DIN male cable using RG213 coax. This Pasternack SMA female to 7/16 DIN male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our female SMA to male 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24808 SMA female to 7/16 DIN male cable assembly is constructed with RG213 coax.

PE3W14808LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. SMA Male to SMP Female Right Angle Cable Using PE-SR405FL Coax, LF Solder. PE3W14808LF is a SMA male to SMP female right angle cable using PE-SR405FL coax. This Pasternack SMA male to SMP female right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMP for connector 2. SMA to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to female SMP right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W14808LF SMA male to SMP female right angle cable assembly is constructed with PE-SR405FL coax.

PE3W04808

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male Right Angle to N Male Cable Using LMR-195-FR Coax., Radio frequency assembly reverse polarity SMA male right angle to N male cable using LMR-195-FR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse polarity SMA male right angle to N male cable using LMR-195-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle reverse polarity SMA cable connection on one end and N type cable connection on the other. Our right angle reverse polarity SMA to type N cable assemblies have a male gender on end 1 and male on end 2. This reverse polarity SMA to N type cable is a male to male coax assembly, PE3W04808, can also be known as a right angle reverse polarity SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA plug to type N plug cable assembly PE3W04808 is built with LMR-195-FR which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with right angle SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity SMA right angle male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04808 can also be used in the other direction and will be N type male to right angle reverse polarity SMA male cable assembly if the opposite connectivity is required. SMA reverse polarity right angle plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA male right angle to N male cable using LMR-195-FR coax.

PE34808/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: Mini SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm. 75 Ohm Mini SMB Plug to 75 Ohm N Male Cable Using 75 Ohm RG59 Coax with HeatShrink. PE34808/HS is a Mini SMB plug to N male cable using RG59 coax. This Pasternack Mini SMB plug to N male cable assembly uses a 75 Ohm Mini SMB for connector 1 and a 75 Ohm N for connector 2. Our plug Mini SMB to male N cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE34808/HS Mini SMB plug to N male cable assembly is constructed with RG59 coax.

TE Connectivity

2480843-1

TE Connectivity

USB C Charge-only,6 Pin, Mid, 3u GF USB Type: C Connector Profile: Standard USB Version: 2.0 Connector & Housing Type: Receptacle Number of Positions: 6 C Standard 2.0 Receptacle | Usb Connector | Part Number: 2480843-1 | Internal Number: 2480843-1 | TE Connectivity
RoHS : Compliant

1,000 : $0.72
500 : $1.0
250 : $1.05
100 : $1.13
50 : $1.19
25 : $1.24
10 : $1.33
1 : $1.56

14,188

2480803-1

TE Connectivity

USB C Charge-only,6 Pin, Vertical, Short USB Type: C Connector Profile: Standard USB Version: 2.0 Connector & Housing Type: Receptacle Number of Positions: 6 C Standard 2.0 Receptacle | Usb Connector | Part Number: 2480803-1 | Internal Number: 2480803-1 | TE Connectivity
RoHS : Compliant

1,000 : $0.6
500 : $0.74
250 : $0.78
100 : $0.83
50 : $0.87
25 : $0.92
10 : $0.98
1 : $1.15

11,801

2480842-1

TE Connectivity

USB C Charge-only,6 Pin, Vert, Long,Lock USB Type: C Connector Profile: Standard USB Version: 2.0 Connector & Housing Type: Receptacle Number of Positions: 6 C Standard 2.0 Receptacle | Usb Connector | Part Number: 2480842-1 | Internal Number: 2480842-1 | TE Connectivity
RoHS : Compliant

1,000 : $0.72
500 : $0.75
250 : $0.93
100 : $0.99
50 : $1.05
25 : $1.09
10 : $1.17
1 : $1.37

10,833

554808-1

TE Connectivity

HDW KIT, STDOFF STUD METRIC Connector Hardware Accessory Type: Screw Primary Product Material: Carbon Steel Hardware Accessory Function: Latching, Locking & Retention Mounting Screw Carbon Steel Latching, Locking & Retention | Connector Hardware | Part Number: 554808-1 | Internal Number: 554808-1 | TE Connectivity
RoHS : Compliant

100 : $4.4
50 : $4.62
10 : $5.16
1 : $5.99

1,975

2842480-8

TE Connectivity

8P Spring TB Plug w/ Flg 3.5, GN Number of Positions: 8 Terminal Block Connector Type: Plug Connector System: Wire-to-Board Centerline (Pitch): .137 in Centerline (Pitch): 3.5 mm Push-In PCB Terminal Blocks: Time Saving Connector | 8 Plug Wire-to-Board .137" | Part Number: 2842480-8 | Internal Number: 2842480-8 | .137" | TE Connectivity
RoHS : Compliant

5,000 : $3.31
2,500 : $3.39
1,000 : $3.47
500 : $3.55
250 : $3.63
100 : $3.71
50 : $3.79
25 : $3.87
10 : $3.95
1 : $4.03

1,103