 |
Moteur de recherche de fiches techniques de composants électroniques |
|
|
Moteur de recherche de fiches techniques de composants électroniques |
|
4533G-R10-R revendeur |
| revendeur | No de pièce | Fabricant | Description | Price | Qty. BuyNow | |
 ComSIT USA | TPS7A4533DCQR | TEXAS INSTRUMENTS INC | AVAILABLE EU | 1,875 | ||
ComSIT USA | CKCS604533UHM | Cenker Coil | Electronic Component RoHS : Not Compliant | 15,000 | ||
| BFC236545333 | Vishay Intertechnologies | Film Capacitor, Polyester, 250V, 10% +Tol, 10% -Tol, 0.033uF, Through Hole Mount RoHS : Not Compliant | 6,000 | |||
| SDR7045330M | Bourns Inc | SMD POWER INDUCTOR General Purpose Inductor, 33uH, 20%, 1 Element, Ferrite-Core, SMD, 2828 RoHS : Compliant | 1,000 | |||
| CY7C45330JC | Cypress Semiconductor | 2KX9 CASCADABLE CLOCKED FIFO WITH PROGRAMMABLE FLAGS FIFO, 2KX9, 20ns, Synchronous, CMOS, PQCC32 RoHS : Not Compliant | 400 | |||
| ERJ6ENF4533V | Panasonic Electronic Components | PRECISION THICK FILM CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.125W, 453000ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805 RoHS : Not Compliant | 45 | |||
| 4533600 | Trimble Navigation Limited | Electronic Component RoHS : Not Compliant | 40 | |||
 NexGen Digital | OSC066050D-45-3.3-TS-TR | SQC Technology Ltd | 624 | |||
 Rutronik | RK73H2ATTD4533F | KOA Speer Electronics Inc | RC0805 453K 1% 0,25W TK100 RoHS : Compliant |
| 15,000 | |
| BWVS00606045331M00 | Pulse Electronics Corporation | BWVS606045 330uH 350mA 20% WWT RoHS : Compliant |
| 2 | ||
 Avnet Silica | ACT4533BYH-T | Qorvo | (Alt: ACT4533BYH-T) RoHS : Compliant | 0 | ||
| ACT4533AYH-T | Qorvo | (Alt: ACT4533AYH-T) RoHS : Compliant | 0 | |||
| DA14533-00RNDB-P | Renesas Electronics Corporation | (Alt: DA14533-00RNDB-P) RoHS : Compliant | 0 | |||
| DA14533-00A02RN2 | Renesas Electronics Corporation | (Alt: DA14533-00A02RN2) RoHS : Compliant | 0 | |||
MIC5245-3.3YM5-TR | Microchip Technology Inc | (Alt: MIC5245-3.3YM5-TR) RoHS : Compliant | 0 | |||
| F14533_ANGELETTE-M | LEDIL | LEDF14533ANGELETTEM (Alt: F14533_ANGELETTE-M) RoHS : Compliant | 0 | |||
| DA14533-00RNDEVKT-P | Renesas Electronics Corporation | (Alt: DA14533-00RNDEVKT-P) RoHS : Compliant | 0 | |||
 Chip-Germany GmbH | RT4533GJ6 | Richtek Technology Corp | RoHS : Compliant | 371 | ||
 DB Roberts | 4533 | Heyco | BRASS CG PG9-45 | 0 | ||
| 4533-632-B-13 | RAF Electronic Hardware | 0 | ||||
| 4533-440-N | RAF Electronic Hardware | 0 | ||||
| 4533-632-AL | RAF Electronic Hardware | 0 | ||||
| 4533-632-B-28 | RAF Electronic Hardware | 0 | ||||
| 4533-440-SS-20 | RAF Electronic Hardware | 0 | ||||
| 4533T-632-B-12 | RAF Electronic Hardware | ZINC CLEAR CHROMATE HEX STANDOFF-1/4 HEX X 15/32L | 0 | |||
| 4533-632-SS | RAF Electronic Hardware | 0 | ||||
| 4533-632-S | RAF Electronic Hardware | 0 | ||||
| 4533T-440-SS | RAF Electronic Hardware | 0 | ||||
| 4533T-832-AL | RAF Electronic Hardware | Standard Aluminum Male-Female | 0 | |||
| 4533T-832-AL | RAF Electronic Hardware | 0 | ||||
| 4533-440-A | RAF Electronic Hardware | 0 | ||||
| 4533-440-AL | RAF Electronic Hardware | HEX STANDOFF 1/4 HEX X 7/16 LENGTH | 0 | |||
| 4533T-440-AL-7 | RAF Electronic Hardware | 0 | ||||
 EBV Elektronik | HFBR-4533Z | Broadcom Limited | Conn Fiber Optic Simplex Plug Straight Cable Mount (Alt: HFBR-4533Z) RoHS : Compliant | 15,000 | ||
STIEC45-33AS | STMicroelectronics | Transient Voltage Suppressor Unidirectional 33V standoff 500A DO214 (Alt: STIEC45-33AS) RoHS : Compliant | 0 | |||
TLE824533SAAUMA1 | Infineon Technologies AG | 3 Channel HighSide and LowSide Linear Solenoid Driver IC 36Pin DSO TR (Alt: SP001257854) RoHS : Compliant | 0 | |||
| MIC5245-3.3YM5-TR | Microchip Technology Inc | (Alt: MIC5245-3.3YM5-TR) RoHS : Compliant | 0 | |||
| F14533_ANGELETTE-M | LEDIL | LEDF14533ANGELETTEM (Alt: F14533_ANGELETTE-M) RoHS : Compliant | 0 | |||
| SGM2045-3.30XXDH4G/TR | SG Micro Corp | LDO Voltage Regulator Fixed 11 to 55V in 70 mV Drop 33V 03A Out XTDFNEP4 40 to 125 C (Alt: SGM2045-3.30XXDH4G/TR) RoHS : Compliant | 0 | |||
 FDH Electronics | M16878/4-BFE-4/5-.333" | Whitmore/Wirenetics | Wire and Cable | 11,000 | ||
| RNC60H4533FS | Vishay Intertechnologies | Other Products | 499 | |||
| SAE J1453-3 6 520112C | WORLD WIDE FITTINGS INC | Uncategorized | 99 | |||
| SAE J1453-3 12 520112C | WORLD WIDE FITTINGS INC | Uncategorized | 24 | |||
| 104-533-9022 | SOURIAU-SUNBANK | Backshells & Ac |
| 0 | ||
| 104-533-9043 | SOURIAU-SUNBANK | Connector Acc |
| 0 | ||
 Flip Electronics | CY8C24533-24PVXI | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 46,732 | |
| CY8C24533-24PVXIT | Cypress Semiconductor | Stock | 46,732 | |||
 Maritex | RNP18-NR6045-330M | RDA Microelectronics | Inductor; SMD; 33uH; 1.5A; 0.188R; 6.0x6.0x4.5mm; 20% |
| 2,722 | |
| SRN6045-330M | Bourns Inc | Inductor; SMD; 33uH; 1.5A; 0.188R; 6x6x4.5mm; 20% RoHS : Compliant |
| 609 | ||
| RPS-45-3.3 | Mean Well | Power Supply; medical; 26.4W; 3.3V; 8A; 80-264VAC RoHS : Compliant |
| 3 | ||
 Pasternack Enterprises US | PE3W04533 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Plug to N Male Right Angle Low Loss Cable Using LMR-195 Coax., Radio frequency assembly reverse polarity SMA plug to N male right angle low loss cable using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA plug to N male right angle low loss cable using LMR-195 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity SMA cable connection on one end and right angle type N cable connection on the other. Our low loss reverse polarity SMA to right angle type N cable assemblies have a plug gender on end 1 and male on end 2. PE3W04533 can also be known as a low loss reverse polarity SMA male to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA male to type N plug cable assembly PE3W04533 is built with LMR-195 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity SMA plug to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04533 can also be used in the other direction and will be right angle N type male to reverse polarity SMA plug cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity male to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA plug to N male right angle low loss cable using LMR-195 coax. | 590 | ||
| PE45331 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: BMA, Connector Gender: Jack, Impedance: 50 Ohm, Body Style: Right Angle, Attachment Method: Solder/Solder, Mount Method: 2 Hole Flange, Minimum Frequency: DC, Maximum Frequency: 12.4 GHz, Interface Type 1: RG405, Interface Type 2: PE-SR405AL, Interface Type 3: PE-SR405FL, Interface Type 4: PE-SR405FLJ. BMA Jack Right Angle Slide-On Connector Solder Attachment 2 Hole Flange Mount for RG405, PE-SR405AL, PE-SR405FL, PE-SR405FLJ. PE45331 BMA jack right angle 2 hole flange coaxial slide-on connector has an interface type of RG405, PE-SR405AL, PE-SR405FL, PE-SR405FLJ and a 50 Ohm impedance. Pasternack BMA jack 2 hole flange connector uses shield/contact solder/solder as an attachment method. Our jack BMA right angle coaxial connector provides a minimum frequency of DC and a maximum frequency of 12.4 GHz. The Pasternack right angle BMA jack 2 hole flange coaxial slide-on connector has a PTFE dielectric type and a VSWR of 1.46. The Pasternack BMA coaxial connector has a brass body with tri-metal plating. Our PE45331 BMAright angle connector uses beryllium copper contact and a gold plating material. This BMA jack right angle 2 hole flange coaxial slide-on RF connector is REACH compliant. This Pasternack right angle jack BMA 2 hole flange connector will ship the same day as purchased. Our 2 hole flange BMA right angle jack connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom BMA connector cable assemblies that will ship the same day as well. |
| 305 | ||
| PE45337 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: BMA, Connector Gender: Jack, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 22 GHz, Interface Type 1: Thru Hole. BMA Jack Slide-On Connector Solder Attachment Thru Hole PCB. PE45337 BMA jack pcb slide-on connector has an interface type of thru hole and a 50 Ohm impedance. Pasternack BMA jack connector uses shield/contact solder as an attachment method. Our jack BMA pcb connector provides a minimum frequency of DC and a maximum frequency of 22 GHz. The Pasternack BMA jack pcb slide-on connector has a PTFE dielectric type and a VSWR of 1.25. The Pasternack BMA pcb connector has a brass body with nickel plating. Our PE45337 BMA connector uses beryllium copper contact and a gold plating material. This BMA jack pcb slide-on RF connector is REACH compliant. This Pasternack jack BMA connector will ship the same day as purchased. Our BMA jack connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom BMA connector cable assemblies that will ship the same day as well. |
| 254 | ||
| PE45339 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: BMA, Connector Gender: Plug, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder, Mount Method: 4 Hole Flange, Minimum Frequency: DC, Maximum Frequency: 22 GHz, Interface Type 1: Stub. BMA Plug Slide-On Connector Solder Attachment 4 Hole Flange Mount Stub Terminal, .340 inch Hole Spacing. PE45339 BMA plug 4 hole flange terminal slide-on connector has an interface type of stub and a 50 Ohm impedance. Pasternack BMA plug 4 hole flange connector uses shield/contact solder as an attachment method. Our plug BMA terminal connector provides a minimum frequency of DC and a maximum frequency of 22 GHz. The Pasternack BMA plug 4 hole flange terminal slide-on connector has a PTFE dielectric type and a VSWR of 1.25. The Pasternack BMA terminal connector has a passivated stainless steel body. Our PE45339 BMA connector uses brass contact. This BMA plug 4 hole flange terminal slide-on RF connector is REACH compliant. This Pasternack plug BMA 4 hole flange connector will ship the same day as purchased. Our 4 hole flange BMA plug connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom BMA connector cable assemblies that will ship the same day as well. |
| 249 | ||
| PE3W04533-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Reverse Polarity SMA Plug to N Male Right Angle Low Loss Cable 24 Inch Length Using LMR-195 Coax., Radio frequency assembly reverse polarity SMA plug to N male right angle low loss cable 24 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA plug to N male right angle low loss cable 24 inch length using LMR-195 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity SMA cable connection on one end and right angle type N cable connection on the other. Our low loss reverse polarity SMA to right angle type N cable assemblies have a plug gender on end 1 and male on end 2. PE3W04533-24 can also be known as a low loss reverse polarity SMA male to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA male to N type plug cable assembly PE3W04533-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity SMA plug to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04533-24 can also be used in the other direction and will be right angle type N male to reverse polarity SMA plug cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity male to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA plug to N male right angle low loss cable 24 inch length using LMR-195 coax. |
| 118 | ||
| PE3W04533-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Reverse Polarity SMA Plug to N Male Right Angle Low Loss Cable 12 Inch Length Using LMR-195 Coax., Radio frequency assembly reverse polarity SMA plug to N male right angle low loss cable 12 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA plug to N male right angle low loss cable 12 inch length using LMR-195 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity SMA cable connection on one end and right angle N type cable connection on the other. Our low loss reverse polarity SMA to right angle type N cable assemblies have a plug gender on end 1 and male on end 2. PE3W04533-12 can also be known as a low loss reverse polarity SMA male to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA male to type N plug cable assembly PE3W04533-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity SMA plug to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04533-12 can also be used in the other direction and will be right angle N type male to reverse polarity SMA plug cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity male to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA plug to N male right angle low loss cable 12 inch length using LMR-195 coax. |
| 118 | ||
| PE45338 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: BMA, Connector Gender: Jack, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 2 GHz, Interface Type 1: Surface Mount. BMA Jack Slide-On Connector Solder Attachment Surface Mount PCB. PE45338 BMA jack pcb slide-on connector has an interface type of surface mount and a 50 Ohm impedance. Pasternack BMA jack connector uses shield/contact solder as an attachment method. Our jack BMA pcb connector provides a minimum frequency of DC and a maximum frequency of 2 GHz. The Pasternack BMA jack pcb slide-on connector has a PTFE dielectric type and a VSWR of 1.2. The Pasternack BMA pcb connector has a stainless steel body with gold plating. Our PE45338 BMA connector uses beryllium copper contact and a gold plating material. This BMA jack pcb slide-on RF connector is REACH compliant. This Pasternack jack BMA connector will ship the same day as purchased. Our BMA jack connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom BMA connector cable assemblies that will ship the same day as well. |
| 37 | ||
| PE45335 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: BMA, Connector Gender: Plug, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 22 GHz, Interface Type 1: Thru Hole. BMA Plug Slide-On Connector Solder Attachment Thru Hole PCB, Extended Version. PE45335 BMA plug pcb slide-on connector has an interface type of thru hole and a 50 Ohm impedance. Pasternack BMA plug connector uses shield/contact solder as an attachment method. Our plug BMA pcb connector provides a minimum frequency of DC and a maximum frequency of 22 GHz. The Pasternack BMA plug pcb slide-on connector has a PTFE dielectric type and a VSWR of 1.25. The Pasternack BMA pcb connector has a stainless steel body with gold plating. Our PE45335 BMA connector uses beryllium copper contact. This BMA plug pcb slide-on RF connector is REACH compliant. This Pasternack plug BMA connector will ship the same day as purchased. Our BMA plug connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom BMA connector cable assemblies that will ship the same day as well. |
| 29 | ||
| PE3MSA00453-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 36 inches. Lead Free 3-Lug TRB Jack with Blunt Cut for 78 Ohm M17/176-00002, 36" Cable., Radio frequency assembly lead free 3-Lug TRB jack with blunt cut for 78 Ohm M17/176-00002, 36" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free 3-Lug TRB jack with blunt cut for 78 Ohm M17/176-00002, 36" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MSA00453-36 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MSA00453-36 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 10 GHz maximum frequency TRB jack to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00453-36 can also be used in the other direction and will be blunt cut genderless to TRB jack cable assembly if the opposite connectivity is required. 1553 TRB female to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free 3-Lug TRB jack with blunt cut for 78 Ohm M17/176-00002, 36" cable. |
| 28 | ||
| PE3FCA453-30M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 6.2 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 12-Fiber LC UPC to LC UPC, OS2 Single Mode Distribution Cable, 6.2mm Riser, 2.0mm breakout, Yellow-30M. Pasternack’s PE3FCA453-30M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 30-meter long 12-fiber cable assembly is equipped with LC/UPC to LC/UPC connectors. Our yellow fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA453-30M fiber optic cable with a 6.2 mm cable diameter and 47 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to LC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 26 | ||
| PE34453-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 36 inches. SC Male to SC Male Cable 36 Inch Length Using RG400 Coax., Radio frequency assembly SC male to SC male cable 36 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SC male to SC male cable 36 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SC to SC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SC cable connection on one end and SC cable connection on the other. Our SC to SC cable assemblies have a male gender on end 1 and male on end 2. This SC to SC cable is a male to male coax assembly, PE34453-36, can also be known as a SC plug to SC plug cable assembly and will be shipped same-day as it is purchased. SC plug to SC plug cable assembly PE34453-36 is built with RG400 which is a flexible coax type. The Pasternack flexible SC cable assembly is manufactured with SC to SC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SC male to SC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SC plug to SC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SC to SC cable assembly for quick shipment worldwide. Variations of SC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SC male to SC male cable 36 inch length using RG400 coax. |
| 4 | ||
| PE7453-30 | Pasternack Enterprises | Key Specifications. Design Fixed Maximum Frequency 6 GHz Impedance 50 Ohm Power Maximum 100 Watt VSWR Maximum 1.35:1 Attenuation 30 dB Connector Series 1 4.3-10 Connector Gender 1 Male Connector Series 2 4.3-10 Connector Gender 2 Female Body Material Aluminum Body Plating Black Anodized. 30 dB Fixed Attenuator, 4.3-10 Male to 4.3-10 Female Rated to 100 Watts Up to 6 GHz. PE7453-30 is a fixed 30 dB attenuator from Pasternack. This 30dB attenuator is an in-line resistive pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 4.3-10 attenuator has a male gender on side 1 and a 4.3-10 female connector on side 2. The Pasternack PE7453-30 30 dB attenuator is rated for up to 6 GHz. Our microwave attenuator is rated to 100 Watts at the stated attenuation value. Our fixed RF attenuator PE7453-30 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 30dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 1 | ||
| PE3W05453-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Female to N Female Cable 36 Inch Using LMR-600-DB Coax., Radio frequency assembly N female to N female cable 36 inch using LMR-600-DB coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N female to N female cable 36 inch using LMR-600-DB coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a female gender on end 1 and female on end 2. This type N to type N cable is a female to female coax assembly, PE3W05453-36, can also be known as a low loss N type jack to N type jack cable assembly and will be shipped same-day as it is purchased. Type N jack to type N jack cable assembly PE3W05453-36 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type female to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N jack to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female to N female cable 36 inch using LMR-600-DB coax. |
| 0 | ||
| PE3C4533/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SSMC Plug Cable Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA male right angle to SSMC plug cable using LMR-100 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SSMC plug cable using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SSMC cable connection on the other. Our right angle SMA to SSMC cable assemblies have a male gender on end 1 and plug on end 2. This SMA to SSMC cable is a male to plug coax assembly, PE3C4533/HS, can also be known as a right angle SMA plug to SSMC male cable assembly and will be shipped same-day as it is purchased. SMA plug to SSMC male cable assembly PE3C4533/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SSMC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA right angle male to SSMC plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4533/HS can also be used in the other direction and will be SSMC plug to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SSMC male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SSMC plug cable using LMR-100 coax with heatshrink. | 0 | |||
| PE3C4533 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SSMC Plug Cable Using LMR-100 Coax. PE3C4533 is a SMA male right angle to SSMC plug cable using LMR-100A coax. This Pasternack SMA male right angle to SSMC plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SSMC for connector 2. SMA right angle to SSMC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to plug SSMC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C4533 SMA male right angle to SSMC plug cable assembly is constructed with LMR-100A coax and the maximum VSWR is 1.4:1, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
 Venkel Ltd. | HPTF0805-TC-4533AT | VENKEL LTD | High Power Thin Film CR;0805;1/4W;�50PPM;453K ;�0.05% RoHS : Compliant | 0 | ||
| HPTF1206-TE-4533UT | VENKEL LTD | High Power Thin Film CR;1206;1/4W;�25PPM;453K ;�0.01% RoHS : Compliant | 0 | |||
| MELFC0102-RK-4533FT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/8W;�100PPM;453K;�1% RoHS : Compliant | 0 | |||
| MELFC0207-VE-4533DT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�25PPM;453K;�0.5% RoHS : Compliant | 0 | |||
| HPTF1210-UN-4533UT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�10PPM;453K ;�0.01% RoHS : Compliant | 0 | |||
| HPTF2010-UE-4533CT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�25PPM;453K ;�0.25% RoHS : Compliant | 0 | |||
| HPTF2010-UN-4533BT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�10PPM;453K ;�0.1% RoHS : Compliant | 0 | |||
| AGCR2010-XK-4533FT | VENKEL LTD | Auto Grade Resistor;2010;1W;�100PPM;453K;�1% RoHS : Compliant | 0 | |||
| MELFC0207-VK-4533FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�100PPM;453K;�1% RoHS : Compliant | 0 | |||
| MELFC0207-XE-4533FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�25PPM;453K;�1% RoHS : Compliant | 0 | |||
| PWCR0805-TK-4533DT | VENKEL LTD | Pulse Withstanding CR;0805;1/4W;�100PPM;453K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0603-16W-C-4533BT-1K | VENKEL LTD | Thin Film CR;0603;1/16W;�50PPM;453K ;�0.1% RoHS : Compliant | 0 | |||
| TFCR1206-8W-C-4533FT | VENKEL LTD | Thin Film CR;1206;1/8W;�50PPM;453K ;�1% RoHS : Compliant | 0 | |||
| TFCR1206-8W-E-4533BT | VENKEL LTD | Thin Film CR;1206;1/8W;�25PPM;453K;�0.1% RoHS : Compliant | 0 | |||
| TFCR2010-4W-C-4533DT | VENKEL LTD | Thin Film CR;2010;1/4W;�50PPM;453K ;�0.5% RoHS : Compliant | 0 |
| ALLDATASHEET vous a-t-il été utile ? [ DONATE ] |
À propos de Alldatasheet | Publicité | Contactez-nous | Politique de confidentialité | Lien vers la fiche technique | Echange de liens | Fabricants All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
French ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand