4532-R68 Price, revendeur, Stock

Key Specifications, Polarity: Standard, Connector Series: SMA, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder, Mount Method: Bulkhead, Interface Type 1: Stub. SMA Female Bulkhead Mount Hermetically Sealed Connector Solder Attachment Stub Terminal, .250 inch Diameter. PE4532 SMA female bulkhead hermetically sealed terminal connector has an interface type of stub and a 50 Ohm impedance. Pasternack SMA female bulkhead connector uses shield/contact solder as an attachment method. The Pasternack SMA female bulkhead hermetically sealed terminal connector has a PTFE dielectric type. The Pasternack SMA terminal connector has a brass body with gold plating. This SMA female bulkhead hermetically sealed terminal RF connector is RoHS and REACH compliant. This Pasternack female SMA bulkhead connector will ship the same day as purchased. Our bulkhead SMA female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom SMA connector cable assemblies that will ship the same day as well.

1 : $53.29
25 : $50.63
50 : $47.96
100 : $45.83

2,679

PE34532LF-48

Pasternack Enterprises

1 : $62.09

280

PE34532-36

Pasternack Enterprises

Key Specifications (Click on Data Sheet Above for Additional Details) .Connector Series 1BNCConnector Gender 1MaleConnector Polarity 1StandardConnector Angle 1StraightConnector Mount Method 1NoneConnector Impedance 150Connector Series 2AlligatorConnector Gender 2ClipConnector Polarity 2StandardConnector Angle 2StraightConnector Mount Method 2NoneConnector Impedance 20RF Cable Part NumberRG62A/URF Cable TypeRG62RF Cable Impedance93. BNC Male to Alligator Clip Cable 36 Inch Length Using 93 Ohm RG62 Coax. Very low frequency equipment test lead cable assembly PE34532-36 from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a BNC cable connector on side 1. Our BNC test lead assembly has a alligator connector on side 2. BNC to BNC RF test equipment lead cable is manufactured with male gender for side 1 and clip for side 2. BNC male to alligator clip cable test lead for RF is constructed with RG62 cable and the impedance is 93 Ohm. PE34532-36 BNC male to alligator clip test equipment lead using RG62 cable has a 36 inch length. Pasternack BNC to alligator RG62 very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with BNC to alligator connectors and RG62 cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States.

1 : $68.49
25 : $65.07
50 : $61.64
100 : $58.9

280

PE34532LF-72

Pasternack Enterprises

1 : $67.49

280

PE34532-24

Pasternack Enterprises

Key Specifications (Click on Data Sheet Above for Additional Details) .Connector Series 1BNCConnector Gender 1MaleConnector Polarity 1StandardConnector Angle 1StraightConnector Mount Method 1NoneConnector Impedance 150Connector Series 2AlligatorConnector Gender 2ClipConnector Polarity 2StandardConnector Angle 2StraightConnector Mount Method 2NoneConnector Impedance 20RF Cable Part NumberRG62A/URF Cable TypeRG62RF Cable Impedance93. BNC Male to Alligator Clip Cable 24 Inch Length Using 93 Ohm RG62 Coax. Very low frequency equipment test lead cable assembly PE34532-24 from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a BNC cable connector on side 1. Our BNC test lead assembly has a alligator connector on side 2. BNC to BNC RF test equipment lead cable is manufactured with male gender for side 1 and clip for side 2. BNC male to alligator clip cable test lead for RF is constructed with RG62 cable and the impedance is 93 Ohm. PE34532-24 BNC male to alligator clip test equipment lead using RG62 cable has a 24 inch length. Pasternack BNC to alligator RG62 very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with BNC to alligator connectors and RG62 cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States.

1 : $56.79
25 : $53.95
50 : $51.11
100 : $48.84

280

PE34532LF-60

Pasternack Enterprises

1 : $66.39

280

PE3MSA00453-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 24 inches. Lead Free 3-Lug TRB Jack with Blunt Cut for 78 Ohm M17/176-00002, 24" Cable., Radio frequency assembly lead free 3-Lug TRB jack with blunt cut for 78 Ohm M17/176-00002, 24" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free 3-Lug TRB jack with blunt cut for 78 Ohm M17/176-00002, 24" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MSA00453-24 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MSA00453-24 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 10 GHz maximum frequency TRB jack to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00453-24 can also be used in the other direction and will be blunt cut genderless to TRB jack cable assembly if the opposite connectivity is required. 1553 TRB female to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free 3-Lug TRB jack with blunt cut for 78 Ohm M17/176-00002, 24" cable.

1 : $111.99
25 : $106.39
50 : $100.79
100 : $96.31

PE3FCA453-25M

Pasternack Enterprises

Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 6.2 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 12-Fiber LC UPC to LC UPC, OS2 Single Mode Distribution Cable, 6.2mm Riser, 2.0mm breakout, Yellow-25M. Pasternack’s PE3FCA453-25M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 25-meter long 12-fiber cable assembly is equipped with LC/UPC to LC/UPC connectors. Our yellow fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA453-25M fiber optic cable with a 6.2 mm cable diameter and 47 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to LC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.

1 : $376.99
5 : $361.91
10 : $346.83
25 : $331.75

PE45329

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: BMA, Connector Gender: Jack, Impedance: 50 Ohm, Body Style: Right Angle, Attachment Method: Solder/Solder, Mount Method: 2 Hole Flange, Minimum Frequency: DC, Maximum Frequency: 12.4 GHz, Interface Type 1: RG402, Interface Type 2: PE-SR402AL, Interface Type 3: PE-SR402FL, Interface Type 4: PE-SR402FLJ, Interface Type 5: PE-SR402TN. BMA Jack Right Angle Slide-On Connector Solder Attachment 2 Hole Flange Mount for RG402, PE-SR402AL, PE-SR402FL, PE-SR402FLJ, PE-SR402TN. PE45329 BMA jack right angle 2 hole flange coaxial slide-on connector has an interface type of RG402, PE-SR402AL, PE-SR402FL, PE-SR402FLJ, PE-SR402TN and a 50 Ohm impedance. Pasternack BMA jack 2 hole flange connector uses shield/contact solder/solder as an attachment method. Our jack BMA right angle coaxial connector provides a minimum frequency of DC and a maximum frequency of 12.4 GHz. The Pasternack right angle BMA jack 2 hole flange coaxial slide-on connector has a PTFE dielectric type and a VSWR of 1.46. The Pasternack BMA coaxial connector has a brass body with tri-metal plating. Our PE45329 BMAright angle connector uses beryllium copper contact and a gold plating material. This BMA jack right angle 2 hole flange coaxial slide-on RF connector is REACH compliant. This Pasternack right angle jack BMA 2 hole flange connector will ship the same day as purchased. Our 2 hole flange BMA right angle jack connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom BMA connector cable assemblies that will ship the same day as well.

1 : $79.19
25 : $75.23
50 : $71.27
100 : $68.1

PE34453-24

Pasternack Enterprises

Key Specifications, Connector Series 1: SC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 24 inches. SC Male to SC Male Cable 24 Inch Length Using RG400 Coax., Radio frequency assembly SC male to SC male cable 24 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SC male to SC male cable 24 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SC to SC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SC cable connection on one end and SC cable connection on the other. Our SC to SC cable assemblies have a male gender on end 1 and male on end 2. This SC to SC cable is a male to male coax assembly, PE34453-24, can also be known as a SC plug to SC plug cable assembly and will be shipped same-day as it is purchased. SC plug to SC plug cable assembly PE34453-24 is built with RG400 which is a flexible coax type. The Pasternack flexible SC cable assembly is manufactured with SC to SC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SC male to SC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SC plug to SC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SC to SC cable assembly for quick shipment worldwide. Variations of SC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SC male to SC male cable 24 inch length using RG400 coax.

1 : $295.99
25 : $281.19
50 : $266.39

PE38453-24

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm, Length: 24 inches. N Male to QN Male Cable 24 Inch Length Using PE-C195 Coax., Radio frequency assembly N male to QN male cable 24 inch length using PE-C195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to QN male cable 24 inch length using PE-C195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to QN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and QN cable connection on the other. Our low loss type N to QN cable assemblies have a male gender on end 1 and male on end 2. This type N to QN cable is a male to male coax assembly, PE38453-24, can also be known as a low loss N type plug to QN plug cable assembly and will be shipped same-day as it is purchased. Type N plug to QN plug cable assembly PE38453-24 is built with PE-C195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to QN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to QN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38453-24 can also be used in the other direction and will be QN male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to QN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to QN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to QN male cable 24 inch length using PE-C195 coax.

1 : $85.59
25 : $81.31
50 : $77.03
100 : $73.61

PE3C4532

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male to SSMC Plug Cable Using LMR-100 Coax. PE3C4532 is a SMA male to SSMC plug cable using LMR-100A coax. This Pasternack SMA male to SSMC plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SSMC for connector 2. Our male SMA to plug SSMC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C4532 SMA male to SSMC plug cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C10453-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-118SR, RF Cable Type: PE-118SR, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.92mm Female to 2.92mm Female Cable 24 Inch Length Using PE-118SR Semi-Rigid Coax., Radio frequency assembly 2.92mm female to 2.92mm female cable 24 inch length using PE-118SR semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female to 2.92mm female cable 24 inch length using PE-118SR semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a female gender on end 1 and a female on end 2. PE3C10453-24 can also be known as a 2.92mm jack to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE (LD) dielectric type. The minimum bend radius for this cable is 0.4 inches, allowing for a single bend without damaging the cable. This radio frequency cable assembly can withstand temperatures ranging from -40 to 105 degrees C. The semi-rigid RF cable has an in-series connection. Our 2.92mm female to 2.92mm female cable has a maximum VSWR of 1.4:1. 2.92mm jack to 2.92mm jack cable assembly PE3C10453-24 is built with PE-118SR which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. 2.92mm jack to 2.92mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm RF cable assembly as per your requirements.

1 : $479.99
10 : $470.39
25 : $460.79
100 : $451.19

PE3C4532/HS-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male to SSMC Plug Low Loss Cable 100 cm Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA male to SSMC plug low loss cable 100 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SSMC plug low loss cable 100 cm length using LMR-100 coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SSMC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SSMC cable connection on the other. Our low loss SMA to SSMC cable assemblies have a male gender on end 1 and plug on end 2. PE3C4532/HS-100CM can also be known as a low loss SMA plug to SSMC male cable assembly and will be shipped same-day as it is purchased. SMA plug to SSMC male cable assembly PE3C4532/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SSMC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SSMC plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4532/HS-100CM can also be used in the other direction and will be SSMC plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SSMC male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SSMC plug low loss cable 100 cm length using LMR-100 coax with heatshrink.

1 : $102.99
25 : $97.84
50 : $92.69
100 : $88.57

PE45321

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: BMA, Connector Gender: Jack, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Crimp/Solder, Mount Method: 2 Hole Flange, Minimum Frequency: DC, Maximum Frequency: 12.4 GHz, Interface Type 1: RG316, Interface Type 2: RG188, Interface Type 3: RG174, Interface Type 4: LMR-100A, Interface Type 5: PE-C100-LSZH. BMA Jack Slide-On Connector Crimp/Solder Attachment 2 Hole Flange Mount for RG316, RG188, RG174, LMR-100A, PE-C100-LSZH. PE45321 BMA jack 2 hole flange coaxial slide-on connector has an interface type of RG316, RG188, RG174, LMR-100A, PE-C100-LSZH and a 50 Ohm impedance. Pasternack BMA jack 2 hole flange connector uses shield/contact crimp/solder as an attachment method. Our jack BMA coaxial connector provides a minimum frequency of DC and a maximum frequency of 12.4 GHz. The Pasternack BMA jack 2 hole flange coaxial slide-on connector has a PTFE dielectric type and a VSWR of 1.34. The Pasternack BMA coaxial connector has a brass body with tri-metal plating. Our PE45321 BMA connector uses beryllium copper contact and a gold plating material. This BMA jack 2 hole flange coaxial slide-on RF connector is REACH compliant. This Pasternack jack BMA 2 hole flange connector will ship the same day as purchased. Our 2 hole flange BMA jack connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom BMA connector cable assemblies that will ship the same day as well, *LMR™ is a Trademark of Times Microwave.

1 : $109.99
25 : $104.49
50 : $98.99
100 : $94.59

TE Connectivity

180453-2

TE Connectivity

FF 312 REC 1-2.5MM2 TPBR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 17 – 13 AWG Wire Size: 1.03 – 2.62 mm² Mating Tab Width: 7.92 mm Receptacle Uninsulated 17 – 13 AWG 1.03 – 2.62 mm² | Quick Disconnect | Part Number: 180453-2 | Internal Number: 180453-2 | TE Connectivity
RoHS : Compliant

1,000 : $0.2
100 : $0.27
10 : $0.32
1 : $0.43

25,186

5145323-1

TE Connectivity

SMT CARD CONN LOW PROFILE 8POS Smart Card Connector Product Type: Contact Module Number of Positions: 8 Pre-Installed Wire & Cable: Without Centerline (Pitch): .1 in Centerline (Pitch): 2.54 mm Contact Module 8 Without .1" | Smart Card Connector | Part Number: 5145323-1 | Internal Number: 5145323-1 | .1" | TE Connectivity
RoHS : Compliant

1,000 : $3.94
500 : $4.05
250 : $4.17
50 : $4.44
1 : $4.87

5,950

36274532265R6M-1

TE Connectivity

3627 453226 5R6 20% S1 Inductance: 5.6 µH Current Rating (Max): 1800 mA DC Resistance: .18 Ω Passive Component Tolerance: 20 % Shielded: No Power Inductor | 5.6 µH 1800 mA .18 Ω 20 % | Part Number: 36274532265R6M-1 | Internal Number: 1-2176637-1 | TE Connectivity
RoHS : Compliant

2,500 : $0.81
1,000 : $0.84
500 : $0.86
250 : $0.88
100 : $0.9
50 : $0.92
25 : $0.95
10 : $0.97
1 : $0.99

4,500

3627453226820K

TE Connectivity

3627 453226 82UH 10% Inductance: 82 µH Current Rating (Max): 170 mA DC Resistance: 2.2 Ω Passive Component Tolerance: 10 % Shielded: No Power Inductor | 82 µH 170 mA 2.2 Ω 10 % | Part Number: 3627453226820K | Internal Number: 2-2176637-5 | TE Connectivity
RoHS : Compliant

250 : $0.9
100 : $0.93
50 : $0.97
25 : $1.0
10 : $1.04
1 : $1.08

2,000

3627453226C331K

TE Connectivity

3627C 453226 330UH 10% Inductance: 330 µH Current Rating (Max): 100 mA DC Resistance: 6.8 Ω Passive Component Tolerance: 10 % Shielded: No Power Inductor | 330 µH 100 mA 6.8 Ω 10 % | Part Number: 3627453226C331K | Internal Number: 1-2176640-6 | TE Connectivity
RoHS : Compliant

250 : $0.9
100 : $0.93
50 : $0.97
25 : $1.0
10 : $1.04
1 : $1.08

500

3627453226C151K

TE Connectivity

3627C 453226 150UH 10% Inductance: 150 µH Current Rating (Max): 130 mA DC Resistance: 3.5 Ω Passive Component Tolerance: 10 % Shielded: No Power Inductor | 150 µH 130 mA 3.5 Ω 10 % | Part Number: 3627453226C151K | Internal Number: 1-2176640-4 | TE Connectivity
RoHS : Compliant

250 : $0.9
100 : $0.93
50 : $0.97
25 : $1.0
10 : $1.04
1 : $1.08

500

3627453226152K

TE Connectivity

3627 453226 1500UH 10% Inductance: 1500 µH Current Rating (Max): 40 mA DC Resistance: 37 Ω Passive Component Tolerance: 10 % Shielded: No Power Inductor | 1500 µH 40 mA 37 Ω 10 % | Part Number: 3627453226152K | Internal Number: 4-2176637-0 | TE Connectivity
RoHS : Compliant

250 : $0.97
100 : $1.01
50 : $1.05
25 : $1.08
10 : $1.12
1 : $1.16

500

3627453226C150K

TE Connectivity

3627C 453226 15UH 10% Inductance: 15 µH Current Rating (Max): 570 mA DC Resistance: .32 Ω Passive Component Tolerance: 10 % Shielded: No Power Inductor | 15 µH 570 mA .32 Ω 10 % | Part Number: 3627453226C150K | Internal Number: 2176640-8 | TE Connectivity
RoHS : Compliant

250 : $0.9
100 : $0.93
50 : $0.97
25 : $1.0
10 : $1.04
1 : $1.08

500

3627453226122K

TE Connectivity

3627 453226 1200UH 10% Inductance: 1200 µH Current Rating (Max): 45 mA DC Resistance: 30 Ω Passive Component Tolerance: 10 % Shielded: No Power Inductor | 1200 µH 45 mA 30 Ω 10 % | Part Number: 3627453226122K | Internal Number: 3-2176637-9 | TE Connectivity
RoHS : Compliant

250 : $0.97
100 : $1.01
50 : $1.05
25 : $1.08
10 : $1.12
1 : $1.16

500

36274532262R7M

TE Connectivity

3627 453226 2R7 20% Inductance: 2.7 µH Current Rating (Max): 500 mA DC Resistance: .32 Ω Passive Component Tolerance: 20 % Shielded: No Power Inductor | 2.7 µH 500 mA .32 Ω 20 % | Part Number: 36274532262R7M | Internal Number: 2176637-6 | TE Connectivity
RoHS : Compliant

250 : $0.9
100 : $0.93
50 : $0.97
25 : $1.0
10 : $1.04
1 : $1.08

500

3627453226152K-2

TE Connectivity

3627 453226 1500UH 10% S2 Inductance: 1500 µH Current Rating (Max): 55 mA DC Resistance: 37 Ω Passive Component Tolerance: 10 % Shielded: No Power Inductor | 1500 µH 55 mA 37 Ω 10 % | Part Number: 3627453226152K-2 | Internal Number: 4-2176637-1 | TE Connectivity
RoHS : Compliant

250 : $0.97
100 : $1.01
50 : $1.05
25 : $1.08
10 : $1.12
1 : $1.16

500

36274532268R2K

TE Connectivity

3627 453226 8R2 10% Inductance: 8.2 µH Current Rating (Max): 450 mA DC Resistance: .56 Ω Passive Component Tolerance: 10 % Shielded: No Power Inductor | 8.2 µH 450 mA .56 Ω 10 % | Part Number: 36274532268R2K | Internal Number: 1-2176637-3 | TE Connectivity
RoHS : Compliant

250 : $0.9
100 : $0.93
50 : $0.97
25 : $1.0
10 : $1.04
1 : $1.08

500

36274532262R2M

TE Connectivity

3627 453226 2R2 20% Inductance: 2.2 µH Current Rating (Max): 500 mA DC Resistance: .3 Ω Passive Component Tolerance: 20 % Shielded: No Power Inductor | 2.2 µH 500 mA .3 Ω 20 % | Part Number: 36274532262R2M | Internal Number: 2176637-5 | TE Connectivity
RoHS : Compliant

250 : $0.9
100 : $0.93
50 : $0.97
25 : $1.0
10 : $1.04
1 : $1.08

500

3627453226C680K

TE Connectivity

3627C 453226 68UH 10% Inductance: 68 µH Current Rating (Max): 220 mA DC Resistance: 1.7 Ω Passive Component Tolerance: 10 % Shielded: No Power Inductor | 68 µH 220 mA 1.7 Ω 10 % | Part Number: 3627453226C680K | Internal Number: 1-2176640-2 | TE Connectivity
RoHS : Compliant

250 : $0.9
100 : $0.93
50 : $0.97
25 : $1.0
10 : $1.04
1 : $1.08

500

3627453226561K

TE Connectivity

3627 453226 560UH 10% Inductance: 560 µH Current Rating (Max): 70 mA DC Resistance: 14.5 Ω Passive Component Tolerance: 10 % Shielded: No Power Inductor | 560 µH 70 mA 14.5 Ω 10 % | Part Number: 3627453226561K | Internal Number: 3-2176637-5 | TE Connectivity
RoHS : Compliant

250 : $0.97
100 : $1.01
50 : $1.05
25 : $1.08
10 : $1.12
1 : $1.16

102

Venkel Ltd.

PWCR0805-BK-4532FT

VENKEL LTD

Pulse Withstanding CR;0805;2/5W;�100PPM;45.3K;�1%
RoHS : Compliant

PWCR1206-VK-4532DT

VENKEL LTD

Pulse Withstanding CR;1206;1/2W;�100PPM;45.3K;�0.5%
RoHS : Compliant

AGCR1206-VK-4532FT

VENKEL LTD

Auto Grade Resistor;1206;1/2W;�100PPM;45.3K;�1%
RoHS : Compliant

HPTF2010-UN-4532DT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�10PPM;45.3K;�0.5%
RoHS : Compliant

MELFC0204-TE-4532DT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�25PPM;45.3K;�0.5%
RoHS : Compliant

MELFC0204-ZC-4532FT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�50PPM;45.3K;�1%
RoHS : Compliant

MELFC0204-ZE-4532BT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�25PPM;45.3K;�0.1%
RoHS : Compliant

MELFC0204-ZZ-4532CT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�15PPM;45.3K;�0.25%
RoHS : Compliant

MELFC0207-XP-4532BT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�5PPM;45.3K;�0.1%
RoHS : Compliant

HPTF1210-UE-4532CT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�25PPM;45.3K;�0.25%
RoHS : Compliant

HPTF1210-UN-4532BT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�10PPM;45.3K;�0.1%
RoHS : Compliant

HPTF2010-UP-4532UT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�5PPM;45.3K;�0.01%
RoHS : Compliant

PWCR0603-QK-4532DT

VENKEL LTD

Pulse Withstanding CR;0603;1/10W;�100PPM;45.3K;�0.5%
RoHS : Compliant

PWCR2512-JK-4532FT

VENKEL LTD

Pulse Withstanding CR;2512;2W;�100PPM;45.3K;�1%
RoHS : Compliant

CR2010-1W-4532FT

VENKEL LTD

Chip Resistor;2010;1W;45.3K;�1%
RoHS : Compliant

Vyrian

C4532C0G1H473J160KA

TDK Corporation

Ceramic Capacitor, Multilayer, Ceramic, 50V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.047uF, Surface Mount, 1812
RoHS : Compliant

10,956

MCP4532-502E/MS

Microchip Technology Inc

Digital Potentiometer, 1 Func, 100000ohm, 2-wire Serial Control Interface, 257 Positions, CMOS, PDSO8
RoHS : Compliant

9,517

MC14532BCPG

onsemi

Encoder, 4000/14000/40000 Series, 8-Bit, CMOS, PDIP16
RoHS : Compliant

9,117

C4532C0G2W683K320KA

TDK Corporation

Ceramic Capacitor, Multilayer, Ceramic, 450V, 10% +Tol, 10% -Tol, C0G, 30ppm/Cel TC, 0.068uF, Surface Mount, 1812
RoHS : Compliant

8,915

CD4532BPWRE4

Texas Instruments

Encoder, 4000/14000/40000 Series, 8-Bit, Inverted Output, CMOS, PDSO16
RoHS : Compliant

7,305

BCM45322

Broadcom Limited

6,818

D4C-4532

OMRON Corporation

Snap Acting/Limit Switch, SPDT, Momentary, 0.1A, 30VDC, 4.8mm, Wire Terminal, Sealed Roller Plunger Actuator, Panel Mount
RoHS : Compliant

6,089

HCC4532BDG

STMicroelectronics

RoHS : Compliant

4,510

HCC4532BKT

STMicroelectronics

RoHS : Compliant

4,460

HCC4532BK

STMicroelectronics

4,423

CD4532BPWE4

Texas Instruments

Encoder, 4000/14000/40000 Series, 8-Bit, Inverted Output, CMOS, PDSO16
RoHS : Compliant

3,662

CD4532BF3A

Texas Instruments

Encoder, 4000/14000/40000 Series, 8-Bit, Inverted Output, CMOS, CDIP16
RoHS : Not Compliant

3,566

FH8069004532404S-RK0G

Intel Corporation

3,013

C4532X7R1E226M

TDK Corporation

Ceramic Capacitor, Multilayer, Ceramic, 25V, 20% +Tol, 20% -Tol, X7R, 15% TC, 22uF, Surface Mount, 1812
RoHS : Compliant

315

MAX4532CWP-T

Maxim Integrated Products

SPDT, 3 Func, 1 Channel, CMOS, PDSO20
RoHS : Not Compliant

298

Win Source Electronics

CC453232-100KL

Bourns Inc

FIXED IND 10UH 550MA 500MOHM SMD
RoHS : Compliant

1,290 : $0.2331
965 : $0.26
745 : $0.2689
540 : $0.2779
350 : $0.2868
145 : $0.3496

843,000

NL453232T-681J-PF

TDK Corporation

FIXED IND 680UH 50MA 30 OHM SMD
RoHS : Compliant

2,805 : $0.1198
2,095 : $0.1337
1,620 : $0.1383
1,180 : $0.1429
760 : $0.1475
315 : $0.1798

80,000

CM453232-101KL

Bourns Inc

FIXED IND 100UH 110MA 8 OHM SMD
RoHS : Compliant

1,170 : $0.2569
875 : $0.2865
675 : $0.2964
490 : $0.3063
320 : $0.3162
130 : $0.3853

61,000

C4532X7R2A225KT0L0U

TDK Corporation

1,160 : $0.2591
930 : $0.2696
715 : $0.2802
500 : $0.3012
325 : $0.3117
155 : $0.3328

47,500

NL453232T-331J-PF

TDK Corporation

FIXED IND 330UH 85MA 14 OHM SMD
RoHS : Compliant

615 : $0.4888
460 : $0.5452
355 : $0.564
260 : $0.5828
170 : $0.6016
70 : $0.7331

32,000

SRF4532-510Y

Bourns Inc

Common Mode Chip Inductors | CMC 51UH 200MA 2LN 2 KOHM SMD
RoHS : Compliant

795 : $0.3782
595 : $0.4219
460 : $0.4364
335 : $0.451
215 : $0.4655
90 : $0.5673

31,592

C4532X7T2E105KT000N

TDK Corporation

955 : $0.3152
715 : $0.3516
550 : $0.3637
400 : $0.3758
260 : $0.3879
110 : $0.4728

30,960

CM453232-220KL

Bourns Inc

FIXED IND 22UH 180MA 3.2 OHM SMD / 22 µH Unshielded Drum Core, Wirewound Inductor 180 mA 3.2Ohm Max 1812 (4532 Metric)
RoHS : Compliant

3,625 : $0.0828
2,710 : $0.0923
2,095 : $0.0955
1,520 : $0.0987
985 : $0.1019
405 : $0.1241

21,380

NL453232T-1R0J-PF

TDK Corporation

FIXED IND 1UH 450MA 500 MOHM SMD
RoHS : Compliant

765 : $0.394
570 : $0.4394
440 : $0.4546
320 : $0.4697
210 : $0.4849
85 : $0.591

20,000

FBMH4532HM132-T

TAIYO YUDEN

FERRITE BEAD 1.3 KOHM 1812 1LN
RoHS : Compliant

925 : $0.3252
690 : $0.3627
535 : $0.3752
390 : $0.3877
250 : $0.4002
105 : $0.4878

18,880

C4532X7R1E226MT000N

TDK Corporation

640 : $0.4697
515 : $0.4888
395 : $0.5079
275 : $0.546
180 : $0.5651
85 : $0.6033

14,400

C4532X7S2A475KT000N

TDK Corporation

new, original packaged

480 : $0.6256
360 : $0.6978
280 : $0.7218
205 : $0.7459
130 : $0.77
55 : $0.9384

12,000

501645-3220

Molex

501645-3220 Molex Headers & Wire Housings IGRID 32P V HDR DUL ROW W/PCB LOC datasheet, inventory, & pricing.
RoHS : Compliant

920 : $0.3275
685 : $0.3653
530 : $0.3778
385 : $0.3904
250 : $0.403
105 : $0.4912

5,900

C4532X5R1E226MT000N

TDK Corporation

630 : $0.4764
475 : $0.5314
365 : $0.5497
265 : $0.568
175 : $0.5864
70 : $0.7146

3,000

NL453232T-100J-PF

TDK Corporation

FIXED IND 10UH 250MA 1.6 OHM SMD
RoHS : Compliant

650 : $0.4625
520 : $0.4813
400 : $0.5
280 : $0.5376
180 : $0.5564
85 : $0.594

3,000

4532-R68 revendeur

Lien URL