| Moteur de recherche de fiches techniques de composants électroniques |
|
2WAB-R revendeur |
| revendeur | No de pièce | Fabricant | Description | Price | Qty. BuyNow | |
![]() TME | HP02WAF2200TCE | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 220Ω; SMD; 0402; 100mW; ±1%; 50V; -55÷155°C RoHS : Compliant |
| 19,900 | |
| HP02WAF680JTCE | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 68Ω; SMD; 0402; 100mW; ±1%; 50V; -55÷155°C RoHS : Compliant |
| 2,900 | ||
| HP02WAF2403TCE | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 240kΩ; SMD; 0402; 100mW; ±1%; 50V; -55÷155°C RoHS : Compliant |
| 1,190 | ||
| GCM0335C1HR12WA16J | Murata Manufacturing Co Ltd | Capacitor: ceramic; MLCC; 0.12pF; 50V; C0G (NP0); ±0.05pF; SMD; 0201 RoHS : Compliant |
| 0 | ||
GRM0225C1E6R2WA03L![]() | Murata Manufacturing Co Ltd | Capacitor: ceramic; MLCC; 6.2pF; 25V; C0G (NP0); ±0.05pF; SMD; 01005 RoHS : Compliant |
| 0 | ||
| GRM0335C1E2R2WA01D | Murata Manufacturing Co Ltd | Capacitor: ceramic; MLCC; 2.2pF; 25V; C0G (NP0); ±0.05pF; SMD; 0201 RoHS : Compliant |
| 0 | ||
| GRM0335C1H8R2WA01D | Murata Manufacturing Co Ltd | Capacitor: ceramic; MLCC; 8.2pF; 50V; C0G (NP0); ±0.05pF; SMD; 0201 RoHS : Compliant |
| 0 | ||
| HP02WAD1002TCE | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 10kΩ; SMD; 0402; 100mW; ±0.5%; HP; 50V |
| 0 | ||
| HP02WAF1302TCE | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 13kΩ; SMD; 0402; 100mW; ±1%; 50V; -55÷155°C RoHS : Compliant |
| 0 | ||
| HP02WAF1800TCE | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 180Ω; SMD; 0402; 100mW; ±1%; 50V; -55÷155°C RoHS : Compliant |
| 0 | ||
| HP02WAJ0113TCE | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 11kΩ; SMD; 0402; 100mW; ±5%; 50V; -55÷155°C RoHS : Compliant |
| 0 | ||
| HP02WAJ0154TCE | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 150kΩ; SMD; 0402; 100mW; ±5%; 50V; -55÷155°C RoHS : Compliant |
| 0 | ||
| HP02WAJ0361TCE | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 360Ω; SMD; 0402; 100mW; ±5%; 50V; -55÷155°C RoHS : Compliant |
| 0 | ||
| HP02WAJ0564TCE | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 560kΩ; SMD; 0402; 100mW; ±5%; 50V; -55÷155°C RoHS : Compliant |
| 0 | ||
| HQ02WAD3901TCE | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 3.9kΩ; SMD; 0402; 100mW; ±0.5%; HQ; 50V |
| 0 | ||
![]() Avnet Americas | EAST10052WA0 | Everlight Electronics Co Ltd | - Tape and Reel (Alt: EAST10052WA0) RoHS : Compliant |
| 3,000 | |
| CWR09DC226KCC4252WAFL | KEMET Corporation | 22.0UF 6.0V - Waffle Pack (Alt: CWR09DC226KCC4252WAFL) RoHS : Not Compliant |
| 0 | ||
| 228BMVAAWFJ2WAR | CTS Corporation | - Tape and Reel (Alt: 228BMVAAWFJ2WAR) RoHS : Compliant |
| 0 | ||
| EPXB2WA23N | Radiall | - Bulk (Alt: EPXB2WA23N) RoHS : Not Compliant |
| 0 | ||
| GRM0335C1H8R2WA01J | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor, 8.2 pF, 50 V, 0201 [0603 Metric], ? 0.05pF, C0G / NP0, GRM Series - Tape and Reel (Alt: GRM0335C1H8R2WA01J) RoHS : Compliant |
| 0 | ||
| ECO-S2WA221CA | Panasonic Electronic Components | - Bulk (Alt: ECO-S2WA221CA) RoHS : Compliant |
| 0 | ||
| EASR3212WA3 | Everlight Electronics Co Ltd | - Tape and Reel (Alt: EASR3212WA3) RoHS : Compliant |
| 0 | ||
| APT1222WA | Panasonic Electronic Components | Optocoupler Triac AC-Output 1-Channel 600Vdrm 6-Pin DIP SMD Tube - Rail/Tube (Alt: APT1222WA) RoHS : Not Compliant |
| 0 | ||
| GRM0335C1H2R2WA01D | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor, 2.2 pF, 50 V, 0201 [0603 Metric], ? 0.05pF, C0G / NP0, GRM Series - Tape and Reel (Alt: GRM0335C1H2R2WA01D) RoHS : Compliant |
| 0 | ||
| GRM0335C2A6R2WA01J | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor, 6.2 pF, 100 V, 0201 [0603 Metric], ? 0.05pF, C0G / NP0, GRM Series - Tape and Reel (Alt: GRM0335C2A6R2WA01J) RoHS : Compliant |
| 0 | ||
GRM1555C2A9R2WA01D![]() | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor, 9.2 pF, 100 V, 0402 [1005 Metric], ? 0.05pF, C0G / NP0, GRM Series - Tape and Reel (Alt: GRM1555C2A9R2WA01D) RoHS : Compliant |
| 0 | ||
| APT1212WAY | Panasonic Electronic Components | Optocoupler Triac AC-Output 1-Channel 600Vdrm 6-Pin DIP SMD T/R - Rail/Tube (Alt: APT1212WAY) RoHS : Not Compliant |
| 0 | ||
| ECO-S2WA121BA | Panasonic Electronic Components | - Bulk (Alt: ECO-S2WA121BA) RoHS : Compliant |
| 0 | ||
| EASR3212WA1 | Everlight Electronics Co Ltd | - Tape and Reel (Alt: EASR3212WA1) RoHS : Compliant |
| 0 | ||
| GRM0335C1H6R2WA01D | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor, 6.2 pF, 50 V, 0201 [0603 Metric], ? 0.05pF, C0G / NP0, GRM Series - Tape and Reel (Alt: GRM0335C1H6R2WA01D) RoHS : Compliant |
| 0 | ||
![]() Newark | ADXL312WACPZ-RL![]() | Analog Devices Inc | Accelerometer, Digital, X/Y/Z Axis, 12G; |Analog Devices, Inc. ADXL312WACPZ-RL RoHS : Compliant |
| 3,988 | |
ADXL312WACPZ-RL![]() | Analog Devices Inc | Accelerometer, Digital, X/Y/Z Axis, 12G; |Analog Devices, Inc. ADXL312WACPZ-RL RoHS : Compliant |
| 3,988 | ||
| ADP7142WAUJZ-R7 | Analog Devices Inc | Ldo, Adj, 0.2A, Tsot-5, -40 To 125Deg C; |Analog Devices, Inc. ADP7142WAUJZ-R7 RoHS : Compliant |
| 1,968 | ||
| ADP7142WAUJZ-R7 | Analog Devices Inc | Ldo, Adj, 0.2A, Tsot-5, -40 To 125Deg C; |Analog Devices, Inc. ADP7142WAUJZ-R7 RoHS : Compliant |
| 1,968 | ||
| ADP1762WACPZ-R7 | Analog Devices Inc | Ldo, Adjustable, 1.98V, 2A, Lfcsp-Ep-16; |Analog Devices, Inc. ADP1762WACPZ-R7 RoHS : Compliant |
| 958 | ||
| ADP1762WACPZ-R7 | Analog Devices Inc | Ldo, Adjustable, 1.98V, 2A, Lfcsp-Ep-16; |Analog Devices, Inc. ADP1762WACPZ-R7 RoHS : Compliant |
| 958 | ||
| S3TL-H05-12WA | IDEC Corporation | Terminal, Wire Ferrule, 20Awg, Single; Wire Ferrule Type:Single Wire; Wire Size Awg Max:20Awg; Conductor Area Csa:0.5Mm²; Pin Length:6Mm; Insulator Colour:Orange; Product Range:S3Tl Series; Overall Length:12Mm; Terminal Plating:Tin Rohs Compliant: Yes RoHS : Compliant |
| 690 | ||
AD8132WARMZ-R7![]() | Analog Devices Inc | Diff-Amp, 350Mhz, -40 To 125Deg C, Msop; |Analog Devices, Inc. AD8132WARMZ-R7 RoHS : Compliant |
| 517 | ||
AD8132WARMZ-R7![]() | Analog Devices Inc | Diff-Amp, 350Mhz, -40 To 125Deg C, Msop; |Analog Devices, Inc. AD8132WARMZ-R7 RoHS : Compliant |
| 517 | ||
ADA4096-2WARMZ-R7![]() | Analog Devices Inc | Op Amp, 2-Ch, 786Khz, 0.4V/?s; |Analog Devices, Inc. ADA4096-2WARMZ-R7 RoHS : Compliant |
| 111 | ||
ADA4096-2WARMZ-R7![]() | Analog Devices Inc | Op Amp, 2-Ch, 786Khz, 0.4V/?s; |Analog Devices, Inc. ADA4096-2WARMZ-R7 RoHS : Compliant |
| 111 | ||
| DM6 - FAA2WA - Z100 | TR Fastenings | Plain Washer, M6, Ss A2, 6.4Mm, 12Mm; |Tr Fastenings DM6 - FAA2WA - Z100 RoHS : Compliant |
| 103 | ||
| DM6 - DSSA2WA - S100 | TR Fastenings | Spring Washer, M6, Ss A2, 6.5Mm, 9.9Mm; |Tr Fastenings DM6 - DSSA2WA - S100 RoHS : Compliant |
| 71 | ||
| DM8-CWA2WAS100BS4463 | TR Fastenings | Crinkle Washer, Ss A2, 8.55Mm, 15Mm; |Tr Fastenings DM8-CWA2WAS100BS4463 RoHS : Compliant |
| 27 | ||
| KFD2-WAC2-EX1.D | PEPPERL+FUCHS GmbH | K-System Analog |Pepperl+Fuchs Pa KFD2-WAC2-EX1.D RoHS : Not Compliant |
| 4 | ||
![]() Analog Devices Inc | ADP7142WAUJZ-1.8-R7 | Analog Devices Inc | 40V 200mA LDO 1.8Vo RoHS : Compliant |
| 19,086 | |
| ADUM3402WARWZ-RL | Analog Devices Inc | 3-5.5V DC 10Mbit/s 4Chnl Dgtl RoHS : Compliant |
| 15,000 | ||
| ADP1762WACPZ1.25-R7 | Analog Devices Inc | 2ALowVin, VeryLow DO low noise RoHS : Compliant |
| 14,100 | ||
| ADP1762WACPZ-0.9-R7 | Analog Devices Inc | 2ALowVin, VeryLow DO low noise RoHS : Compliant |
| 14,092 | ||
AD5312WARMZ-REEL7![]() | Analog Devices Inc | Dual 10-bit serial input DAC RoHS : Compliant |
| 6,000 | ||
| ADUM3402WARWZ | Analog Devices Inc | 3-5.5V DC 10Mbit/s 4Chnl Dgtl RoHS : Compliant |
| 5,640 | ||
AD8132WARMZ-R7![]() | Analog Devices Inc | Low Power Diff amp, Hgh BW, fs RoHS : Compliant |
| 1,170 | ||
ADA4096-2WARMZ-RL![]() | Analog Devices Inc | 30V,Micropower, OVP, RRIO OpAm RoHS : Compliant |
| 600 | ||
| TMC2202-WA-T | Analog Devices Inc | Stepper Motor Driver/Controlle RoHS : Compliant |
| 261 | ||
| ADP1762WACPZ-R7 | Analog Devices Inc | 2ALowVin, VeryLow DO low noise RoHS : Compliant |
| 186 | ||
| ADUM4402WARWZ-RL | Analog Devices Inc | Quad-Ch 5kV Enhanced ESD Dig I RoHS : Compliant |
| 0 | ||
AD5662WARMZ-1REEL7![]() | Analog Devices Inc | Single 16 Bit 3V/5V With Refe RoHS : Compliant |
| 0 | ||
| ADA4522-2WARMZ-R7 | Analog Devices Inc | 55V Low Noise Zero Drift OpAmp RoHS : Compliant |
| 0 | ||
| ADUM4402WARWZ | Analog Devices Inc | Quad-Ch 5kV Enhanced ESD Dig I RoHS : Compliant |
| 0 | ||
| ADA4522-2WARMZ-RL | Analog Devices Inc | 55V Low Noise Zero Drift OpAmp RoHS : Compliant |
| 0 | ||
![]() RS | BB-485USBTB-2W-A | Advantech Co Ltd | SERIAL CONVERTER, HIGH RETENTION USB TO TB RS-485, ADUSB, BB SERIES RoHS : Compliant |
| 42 | |
| C2WA00418 | Norgren | FLOW CONTROL, 1/4X1/8 BANJO-IN |
| 10 | ||
| SNAP2182WA | Hubbell Wiring Device-Kellems | SNAP2CONNECT 20A/125V HOSPITAL GRADE DECO, WHITE |
| 8 | ||
| P2AF2WA90 | Altech Corporation | PUSH BUTTON WITH ARROW ,WHITE ON BLACK |
| 5 | ||
| S100PTVD2WAD2Q | Banner Engineering Corp | S100 PRO TOUCH DISPLAY DISCRETE ; TWO ROW DOT MATRIX WHITE DISPLAY; RGB LEDS |
| 5 | ||
| KFD2-WAC2-EX1.D (231221) | PEPPERL+FUCHS GmbH | ISOLATOR, ANALOG, K-SYSTEM |
| 5 | ||
| VDW22WA | SMC Corporation of America | VALVE, SOL, 2 PORT, 1/8PT, BODY PT, WATER DISPENSING |
| 4 | ||
| S100PTVD2WAKQ | Banner Engineering Corp | S100 PRO TOUCH DISPLAY WITH IO-LINK; TWO ROW DOT MATRIX WHITE DISPLAY; RGB LEDS |
| 4 | ||
| C2WA00428 | Norgren | FLOW CONTROL, BANJO-IN 1/4 1/4 |
| 2 | ||
| ISE20C-Y-A2-WA1 | SMC Corporation of America | PRESSURE SWITCH, 3 SCREEN, IP65, -0.1 TO 1 KPA, 1/4, PNP, ISE20 SERIES |
| 2 | ||
| C320MH2WA0 | Eaton Cutler-Hammer | CONVERSION KIT, 2-WIRE MECH HELD MODULE120VAC |
| 1 | ||
| RK812WALLOA | StarTech | 8U OPEN FRAME WALLMOUNT EQUIPMENT RACK ADJUSTABLE DEPTH |
| 1 | ||
| FAP12WAQDLCZ | Panduit Corp | FAP WITH 12 LC 10 GBE DUPL MM ADAPTERS (AQ) ZIRCONIA RoHS : Compliant |
| 1 | ||
| S100PTVD2WASQ | Banner Engineering Corp | S100 PRO TOUCH DISPLAY WITH MODBUS ; TWO ROW DOT MATRIX WHITE DISPLAY; RGB LEDS |
| 1 | ||
| A2W-AT2.5-WC1 (A2WAT25WC1) | OMRON Industrial Automation | WIRELESS PUSH BUTTON MAGNETIC ANTENNA |
| 1 | ||
![]() Microchip Technology Inc | PX-5701-EA2-WAXX-12M0000000 | Microchip Technology Inc | PX-5701-EA2-WAXX-12M0000000, Projected EOL: 2049-11-17 - Contact for Pricing RoHS : Compliant | 0 | ||
| PX-5701-EA2-WAXX-48M0000000 | Microchip Technology Inc | PX-5701-EA2-WAXX-48M0000000, Projected EOL: 2049-11-17 - Contact for Pricing RoHS : Compliant | 0 | |||
| PX-5702-EA2-WAXX-32K7680000 | Microchip Technology Inc | PX-5702-EA2-WAXX-32K7680000, Projected EOL: 2049-11-17 - Contact for Pricing | 0 | |||
| PX-7021-EA2-WALX-3M68640000 | Microchip Technology Inc | PX-7021-EA2-WALX-3M68640000, Projected EOL: 2049-11-17 - Contact for Pricing | 0 | |||
![]() Bisco Industries | 10.2X32X2 WASHER THRUST SS | WASHERS | 996 | |||
| AES01C250A12WA2D81 | HEX HEAD CAP SCREWS | 300 | ||||
| 132-WASH-GLD | Amphenol Industrial Operations | 8 | ||||
| AES01C500B62WA2D81 | HEX HEAD CAP SCREWS | 4 | ||||
![]() Rochester Electronics | FS32K142WAT0WLHT | NXP Semiconductors | IC MCU ARM® Cortex®-M4F 32Bit 1 Core FLASH 256kB (256k x 8) 80MHz 64-QFP Tray RoHS : Compliant |
| 24 | |
| FS32K142WAT0WLFR | NXP Semiconductors | IC MCU ARM® Cortex®-M4F 32Bit 1 Core FLASH 256kB (256k x 8) 80MHz 48-QFP T/R RoHS : Compliant |
| 6,000 | ||
| NGTB25N120FL2WAG | onsemi | IGBT, 1200 V Field Stop II, 25 A RoHS : Compliant |
| 8,762 | ||
M1MA152WAT1G![]() | onsemi | Rectifier Array Standard 80V 100mA SOT-23-3 T/R RoHS : Compliant |
| 80,449 | ||
SM1MA142WAT1G![]() | onsemi | Rectifier Array Standard 80V 100mA SOT-323 T/R RoHS : Compliant |
| 93,000 | ||
| NSVM1MA152WAT1G | onsemi | Rectifier Array Standard 80V 100mA SOT-23-3 T/R RoHS : Compliant |
| 1,933 | ||
| NGTB50N65FL2WAG | onsemi | IGBT, 650 V Field Stop II, 50 A RoHS : Compliant |
| 3,330 | ||
| NGTB75N65FL2WAG | onsemi | IGBT, 650 V Field Stop II, 75 A RoHS : Compliant |
| 38 | ||
AD8132WARMZ-R7![]() | Analog Devices Inc | Special Purpose Amplifier Differential 1 CH 8-SOP T/R RoHS : Compliant |
| 640 | ||
| ADUM3472WARSZ | Analog Devices Inc | Digital Isolators General Purpose 25kV/µs 20-SOP Tube RoHS : Compliant |
| 5,750 | ||
AD5312WARMZ-REEL7![]() | Analog Devices Inc | IC DAC 2 CONV 10Bits String DAC 3-Wire Serial, DSP, MICROWIRE, QSPI, SPI 10-SOP T/R RoHS : Compliant |
| 51 | ||
AD8602WARZ-RL![]() | Analog Devices Inc | Operational Amplifier, 2 Func, 2100uV Offset-Max, CMOS, PDSO8 RoHS : Compliant |
| 107 | ||
ADR512WARTZ-R7![]() | Analog Devices Inc | IC VOL REF Shunt Fixed 1.2V 10mA ±0.7% SOT-23-3 T/R RoHS : Compliant |
| 2,111 | ||
AD8692WARMZ-REEL![]() | Analog Devices Inc | Op Amp Standard 10MHz 8-SOP T/R RoHS : Compliant |
| 41 | ||
AD8602WARZ-R7![]() | Analog Devices Inc | Op Amp Standard 8.4MHz 8-SOIC T/R RoHS : Compliant |
| 153 | ||
![]() Sager | S7212WA | Panduit Corp | Wire Ducting & Raceways 700mmW x 42 RU x 1070mmD S-Type Network, | 0 | ||
| S7222WA9 | Panduit Corp | Wire Ducting & Raceways 700mmW x 1219mmD x 42 RU S-Type Cabinet, | 0 | |||
| BRACKKIT2WAYV-CS1979 | ABB Group | 2WAY OFF SET BRACKET KIT, SWG |
| 0 | ||
| ASW2L22-W/AWR1 | IDEC Corporation | Pushbutton Switches Selector Switch | 0 | |||
| APT1222WA | Panasonic Electronic Components | TRIAC & SCR OUTPUT OPTOCOUPLERS SMD/SMT RoHS : Compliant |
| 0 | ||
| 8442WAD | IDEC Corporation | PUSHBUTTON SWITCH 8000 |
| 0 | ||
| APT1212WAY | Panasonic Electronic Components | TRIAC & SCR OUTPUT OPTOCOUPLERS THROUGH HOLE RoHS : Compliant |
| 0 | ||
| S6212WA | Panduit Corp | Wire Ducting & Raceways 600mmW x 42 RU x 1070mmD S-Type Network, | 0 | |||
| EF1A-12WA-M32 | IDEC Corporation | LED Lighting Fixtures HazLo Flood Light RoHS : Compliant |
| 0 | ||
| ASW2K22-W-AWR1 | IDEC Corporation | Pushbutton Switches Selector Switch |
| 0 | ||
| HBL57242WA | Hubbell Incorporated | R WAY, 1G UTL BOX, HBL500/700/750, WH |
| 0 | ||
| IG2182WA | Hubbell Incorporated | STYLE HG DUP RCPT,IG,20A 125V, 5-20R, WH |
| 0 | ||
| NA5-12W-ADAPTER-NS10-NS12 | ARATAS Americas | LCD Graphic Display Modules & Accessories NA5-12W from NS10/NS12 adapter | 0 | |||
| C430R12WA | Hubbell Incorporated | Hubbell | 0 | |||
| 8432WAB | IDEC Corporation | PUSHBUTTON SWITCH 8000 |
| 0 | ||
![]() Ameya Holding Limited | ADP7142WAUJZ-3.3-R7 | Analog Devices Inc | RoHS : Compliant | 15,000 | ||
![]() ComSIT USA | GRM1555C1H1R2WA01D![]() | Murata Manufacturing Co Ltd | CERAMIC CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 50V, 4.17% +Tol, 4.17% -Tol, C0G, 30ppm/Cel TC, 0.0000012uF, Surface Mount, 0402 RoHS : Compliant | 50,000 | ||
| MA152WATX | Panduit Corp | Rectifier Diode, 2 Element, 0.1A, Silicon RoHS : Not Compliant | 38,005 | |||
GRM1885C1H9R2WA01D![]() | Murata Manufacturing Co Ltd | CERAMIC CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 50V, 0.54% +Tol, 0.54% -Tol, C0G, 30ppm/Cel TC, 0.0000092uF, Surface Mount, 0603 RoHS : Compliant | 8,000 | |||
| LSR471M2WA3545EGA | Lelon Electronics Corp | Electronic Component RoHS : Compliant | 78 | |||
![]() Interstate Connecting Components | STD12W-A | TE Connectivity | 392758-000 1198187-9 RoHS : Compliant |
| 600 | |
| M28840/612WA | Glenair Inc | MIL-DTL-28840 harsh environment connectors consist of wall mount receptacles in-line receptacles box mount receptacles jam nut receptacles box mount receptacles and cable connecting plugs. The plugs and receptacle are available with straight 45 and RoHS : Not Compliant |
| 295 | ||
| M28840/912WA | Glenair Inc | MIL-DTL-28840 harsh environment connectors consist of wall mount receptacles in-line receptacles box mount receptacles jam nut receptacles box mount receptacles and cable connecting plugs. The plugs and receptacle are available with straight 45 and RoHS : Not Compliant |
| 60 | ||
| M28840/812WA | Glenair Inc | MIL-DTL-28840 harsh environment connectors consist of wall mount receptacles in-line receptacles box mount receptacles jam nut receptacles box mount receptacles and cable connecting plugs. The plugs and receptacle are available with straight 45 and |
| 37 | ||
| M28840/602WA | Glenair Inc | MIL-DTL-28840 harsh environment connectors consist of wall mount receptacles in-line receptacles box mount receptacles jam nut receptacles box mount receptacles and cable connecting plugs. The plugs and receptacle are available with straight 45 and RoHS : Not Compliant |
| 16 | ||
| M28840/622WA | Glenair Inc | MIL-DTL-28840 harsh environment connectors consist of wall mount receptacles in-line receptacles box mount receptacles jam nut receptacles box mount receptacles and cable connecting plugs. The plugs and receptacle are available with straight 45 and RoHS : Not Compliant |
| 12 | ||
| M28840/922WA | Glenair Inc | MIL-DTL-28840 harsh environment connectors consist of wall mount receptacles in-line receptacles box mount receptacles jam nut receptacles box mount receptacles and cable connecting plugs. The plugs and receptacle are available with straight 45 and RoHS : Not Compliant |
| 6 | ||
| M28840/802WA | Glenair Inc | MIL-DTL-28840 harsh environment connectors consist of wall mount receptacles in-line receptacles box mount receptacles jam nut receptacles box mount receptacles and cable connecting plugs. The plugs and receptacle are available with straight 45 and |
| 1 | ||
| M28840/902WA | Glenair Inc | MIL-DTL-28840 harsh environment connectors consist of wall mount receptacles in-line receptacles box mount receptacles jam nut receptacles box mount receptacles and cable connecting plugs. The plugs and receptacle are available with straight 45 and RoHS : Not Compliant |
| 1 | ||
| M28840/822WA | Glenair Inc | MIL-DTL-28840 harsh environment connectors consist of wall mount receptacles in-line receptacles box mount receptacles jam nut receptacles box mount receptacles and cable connecting plugs. The plugs and receptacle are available with straight 45 and |
| 0 | ||
| M28840/512WA | Glenair Inc | B/S FOR METAL CORE CONDUIIT RoHS : Unknown | 0 | |||
| STD02W-A | TE Connectivity | 487180-000 RoHS : Compliant |
| 0 | ||
| 732-8052-12 WA | TE Connectivity | 732-8052-12 WA | 0 | |||
| 132-WASH-GLD | Amphenol RF |
| 0 | |||
![]() NexGen Digital | 100K1/2WATT | 581 | ||||
![]() PEI Genesis | HEXAGONAL NUT APD 1-2 WAY | ITT Interconnect Solutions |
| 7,661 | ||
| 132-WASH-GLD | Amphenol RF |
| 500 | |||
![]() Powell Electronics | STD12W-A | TE Connectivity | Connectors RoHS : Compliant |
| 1,300 | |
| 132-WASH-GLD | Amphenol RF | SMA STAR WASHER GLD |
| 330 | ||
| M28840/252WA | Glenair Inc | BACKSHELL |
| 11 | ||
| M28840/2512WA | Glenair Inc | BACKSHELL |
| 9 | ||
| M28840/2522WA | Glenair Inc | BACKSHELL |
| 7 | ||
| M28840/802WA | Glenair Inc | M28840 - RFI/EMI ENVIRON ADAPTER |
| 1 | ||
| P2AF2WA0 | Altech Corporation | Push Button with arrow up/down |
| 1 | ||
![]() Chip 1 Exchange | ADLX312WACPZ-RL | AD E | INSTOCK | 11,488 | ||
| 2WA1594-080111F | Aces Electronics Co Ltd | INSTOCK | 1,329 | |||
ADA4096-2WARMZ-R7![]() | Analog Devices Inc | INSTOCK RoHS : Compliant | 1,000 | |||
| 2WA1554-107111 | INSTOCK | 180 | ||||
| EA DOGM162W-A | INSTOCK | 25 | ||||
ADXL312WACPZ-RL![]() | Analog Devices Inc | INSTOCK RoHS : Compliant | 19 | |||
![]() Avnet Abacus | PIN CONTACT APD 2-WAY 16MM | ITT Interconnect Solutions | Circular Contact PIN Crimp ST Cable Mount (Alt: 430-8645-007) RoHS : Compliant | 2,800 | ||
| HEXAGONAL NUT APD 1-2 WAY | ITT Interconnect Solutions | Connector Accessory Hex Nut APD High Power 1way Series Circular Connectors (Alt: 217-8516-010) RoHS : Compliant | 1,500 | |||
| SOCKET CONTACT APD 2-WAY 10MM | ITT Interconnect Solutions | Contact SKT Crimp ST Cable Mount (Alt: 031-8646-011) RoHS : Compliant | 700 | |||
| ECOS2WA680CA | Panasonic Electronic Components | Electrolytic Capacitor 68 uF 450 V 20 SnapIn 3000 hours 105C TSHA Series 25 mm 25 mm (Alt: ECOS2WA680CA) RoHS : Compliant | 0 | |||
| 1812WA150KAT1A | Kyocera AVX Components | Multilayer Ceramic Capacitor 15 pF 2500 V 10 C0G NP0 1812 4532 Metric - Tape and Reel (Alt: 1812WA150KAT1A) RoHS : Compliant | 0 | |||
| 981HE0A2WA1F16 | Vishay Intertechnologies | Rotational Type Position Sensors50G 45V to 55V (Alt: 981HE0A2WA1F16) RoHS : Compliant | 0 | |||
| 228BMVAAWFJ2WAR | CTS Corporation | - Tape and Reel (Alt: 228BMVAAWFJ2WAR) RoHS : Compliant | 0 | |||
| GRM0335C1H8R2WA01J | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor 82 pF 50 V 0201 0603 Metric 005pF C0G NP0 GRM Series (Alt: GRM0335C1H8R2WA01J) RoHS : Compliant | 0 | |||
| GRM0225C1H6R2WA03L | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor 62 pF 50 V 01005 0402 Metric 005pF C0G NP0 GRM Series (Alt: GRM0225C1H6R2WA03L) RoHS : Compliant | 0 | |||
| GRM0335C1H2R2WA01D | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor 22 pF 50 V 0201 0603 Metric 005pF C0G NP0 GRM Series - Tape and Reel (Alt: GRM0335C1H2R2WA01D) RoHS : Compliant | 0 | |||
| GRM0335C1H6R2WA01D | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor 62 pF 50 V 0201 0603 Metric 005pF C0G NP0 GRM Series (Alt: GRM0335C1H6R2WA01D) RoHS : Compliant | 0 | |||
| GRM0335C2A2R2WA01D | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor 22 pF 100 V 0201 0603 Metric 005pF C0G NP0 GRM Series (Alt: GRM0335C2A2R2WA01D) RoHS : Compliant | 0 | |||
GRM0225C1E1R2WA03L![]() | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor 12 pF 25 V 01005 0402 Metric 005pF C0G NP0 GRM Series (Alt: GRM0225C1E1R2WA03L) RoHS : Compliant | 0 | |||
GRM0225C1E7R2WA03L![]() | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor 72 pF 25 V 01005 0402 Metric 005pF C0G NP0 GRM Series (Alt: GRM0225C1E7R2WA03L) RoHS : Compliant | 0 | |||
| PIN CONTACT APD 2-WAY 10MM | ITT Interconnect Solutions | Contact PIN Crimp ST Cable Mount Bulk (Alt: 430-8645-009) RoHS : Compliant | 0 | |||
![]() Avnet Asia | GRM0335C1H1R2WA01D | Murata Manufacturing Co Ltd | (Alt: GRM0335C1H1R2WA01D) RoHS : Compliant | 0 | ||
GRM1555C1H1R2WA01D![]() | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor, 1.2 pF, 50 V, 0402 [1005 Metric], ? 0.05pF, C0G / NP0, GRM Series (Alt: GRM1555C1H1R2WA01D) RoHS : Compliant | 0 | |||
| GRM0225C1C2R2WA03D | Murata Manufacturing Co Ltd | Cap Ceramic 2.2pF 16V C0G 0.05pF SMD 01005 125?C Paper T/R (Alt: GRM0225C1C2R2WA03D) RoHS : Compliant | 0 | |||
| GRM0225C1C8R2WA03D | Murata Manufacturing Co Ltd | Cap Ceramic 8.2pF 16V C0G 0.05pF SMD 01005 125?C Paper T/R (Alt: GRM0225C1C8R2WA03D) RoHS : Compliant | 0 | |||
M1MA142WAT1G![]() | onsemi | 80 V Common Anode Small Signal Switching Diode. (Alt: M1MA142WAT1G) RoHS : Compliant | 0 | |||
![]() Avnet Silica | MP4462 WAFER | Monolithic Power Systems | MPSMP4462 WAFER (Alt: MP4462) RoHS : Compliant | 0 | ||
M1MA152WAT1G![]() | onsemi | 80 V Dual Common Anode Switching Diode ONSSPCDDEYG8V5J (Alt: M1MA152WAT1G) RoHS : Compliant | 0 | |||
| WND60P12W-AQ | WeEn Semiconductor Co Ltd | (Alt: WND60P12W-AQ) RoHS : Compliant | 0 | |||
M1MA142WAT1G![]() | onsemi | 80 V Common Anode Small Signal Switching Diode ONSSPCDDEYG8V5J (Alt: M1MA142WAT1G) RoHS : Compliant | 0 | |||
SM1MA142WAT1G![]() | onsemi | 80 V Common Anode Small Signal Switching Diode ONSSPCDDEYG8V5J (Alt: SM1MA142WAT1G) RoHS : Compliant | 0 | |||
| K32WA-001-T10 | NXP Semiconductors | K32W041A Wireless Microcontroller Upgrade Module for IOTZTBDK006 Advanced Development Kit (Alt: K32WA-001-T10) RoHS : Compliant | 0 | |||
| K32WAM-001-T10 | NXP Semiconductors | K32W041AM Wireless Microcontroller Upgrade Module Board (Alt: K32WAM-001-T10) RoHS : Compliant | 0 | |||
| NGTB40N65FL2WAG | onsemi | (Alt: NGTB40N65FL2WAG) RoHS : Compliant | 0 | |||
| NGTB75N120FL2WAG | onsemi | (Alt: NGTB75N120FL2WAG) RoHS : Compliant | 0 | |||
| FS32K142WAT0WLHT | NXP Semiconductors | ARM MCU S32 Family S32K1xx Series Microcontrollers ARM CortexM4F 32 bit 80 MHz 256 KB (Alt: FS32K142WAT0WLHT) RoHS : Compliant | 0 | |||
| FS32K142WAT0WLFT | NXP Semiconductors | MCU 32Bit ARM CortexM4F RISC 256KB Flash 27V to 55V 48Pin LQFP Tray (Alt: FS32K142WAT0WLFT) RoHS : Compliant | 0 | |||
| ADAPTER BOARD CSI-2 WANDBOARD | Allied Vision Technologies GmbH | Adapter Board for Wandboard (Alt: 12362) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | MA912.W.A.BI.001 | Taoglas Antenna Solutions | MA912.W.A.BI.001 2*LTE MIMO Adhesive Mount White Antenna |
| 0 | |
| MA912.W.A.BI.001.WM | Taoglas Antenna Solutions | 2in1 White Adhesive 4G LTE(1&2) 3000mm KSR200-P SMA(M) Wall Mount |
| 0 | ||
![]() Component Electronics, Inc | MA792WA-(TX) | Panasonic Electronic Components | IN STOCK SHIP TODAY |
| 2,500 | |
| EAPL2812WA0 | Everlight Electronics Co Ltd | IN STOCK SHIP TODAY RoHS : Compliant |
| 700 | ||
| JRC-0A2WA | RCA | IN STOCK SHIP TODAY |
| 2 | ||
| 0A2WA | RCA | IN STOCK SHIP TODAY |
| 2 | ||
| OB2WA | RCA | IN STOCK SHIP TODAY |
| 2 | ||
| KFD2-WAC-EX1 | PEPPERL+FUCHS GmbH | IN STOCK SHIP TODAY |
| 1 | ||
| 970-603X-92WAN | Littelfuse Inc | IN STOCK SHIP TODAY | 1 | |||
![]() EBV Elektronik | M1MA152WAT1G![]() | onsemi | 80 V Dual Common Anode Switching Diode ONSSPCDDEYG8V5J (Alt: M1MA152WAT1G) RoHS : Compliant | 0 | ||
| WND60P12W-AQ | WeEn Semiconductor Co Ltd | (Alt: WND60P12W-AQ) RoHS : Compliant | 0 | |||
M1MA142WAT1G![]() | onsemi | 80 V Common Anode Small Signal Switching Diode ONSSPCDDEYG8V5J (Alt: M1MA142WAT1G) RoHS : Compliant | 0 | |||
| FS32K142WAT0WLHR | NXP Semiconductors | MCU 32Bit ARM CortexM4F RISC 256KB Flash 27V to 55V 64Pin LQFP TR (Alt: FS32K142WAT0WLHR) RoHS : Compliant | 0 | |||
| FS32K142WAT0WLFT | NXP Semiconductors | MCU 32Bit ARM CortexM4F RISC 256KB Flash 27V to 55V 48Pin LQFP Tray (Alt: FS32K142WAT0WLFT) RoHS : Compliant | 0 | |||
| NCJ38AJHN/0B022WAY | NXP Semiconductors | (Alt: NCJ38AJHN/0B022WAY) RoHS : Compliant | 0 | |||
| C19619_DALINE-10-SHD2-WAS-MATT | LEDIL | Asymmetric beam for wallwashing colour black (Alt: C19619_DALINE-10-SHD2-WAS-MATT) RoHS : Compliant | 0 | |||
| C19621_DALINE-10-SHD2-WAS-WHT-MATT | LEDIL | SHADE24 POSMM D (Alt: C19621_DALINE-10-SHD2-WAS-WHT-MATT) RoHS : Compliant | 0 | |||
![]() Flip Electronics | M1MA152WAT1G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 153,000 | |
| NSVM1MA152WAT1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 129,000 | ||
SM1MA142WAT1G![]() | onsemi | Stock, Ship Today RoHS : Compliant | 72,000 | |||
| FS32K142WAT0WLFT | NXP Semiconductors | Stock RoHS : Compliant | 6,500 | |||
| FS32K142WAT0WLFR | NXP Semiconductors | Stock RoHS : Compliant | 4,000 | |||
| FS32K142WAT0WLHT | NXP Semiconductors | Stock RoHS : Compliant | 1,120 | |||
| NGTB75N65FL2WAG | onsemi | Stock, Ship Today RoHS : Compliant |
| 30 | ||
![]() Master Electronics | A22NLMPATWAP202WA | OMRON Industrial Automation | PSHIN PRJ BM BZL WHTE RoHS : Compliant |
| 0 | |
| APT1222WA | Panasonic Electronic Components | Optocoupler Triac AC-OUT 1-CH 600V 5-Pin DIP SMD Tube RoHS : Compliant |
| 0 | ||
| A22NLMPATWAG002WA | OMRON Industrial Automation | ASSM PRJ BM BZL WHTE RoHS : Compliant |
| 0 | ||
| 8442WAD | APEM Inc | Switch Push Button ON Mom DPDT Round Plunger 6A 250VAC 30VDC Momentary Contact PC Pins Panel Mount/Through Hole RoHS : Compliant |
| 0 | ||
| APT1212WAY | Panasonic Electronic Components | Optocoupler Triac AC-OUT 1-CH 600V 5-Pin DIP SMD T/R RoHS : Compliant |
| 0 | ||
| EF1A-12WA-M32 | IDEC Corporation | HAZLO FLOOD LIGHT RoHS : Compliant |
| 0 | ||
| ASW2K22-W-AWR1 | IDEC Corporation | SELECTOR SWITCH RoHS : Compliant |
| 0 | ||
| IG2182WA | Hubbell Premise Wiring | STYLE HG DUP RCPT IG 20A 125V 5-20R WH RoHS : Compliant |
| 0 | ||
| TK12WA-006 | Fuji Electric Co Ltd | RoHS : Compliant |
| 0 | ||
| A22NLBPMTWAG002WA | OMRON Industrial Automation | ASSM PRJ PLAS BZL WHTE RoHS : Compliant |
| 0 | ||
| 8432WAB | APEM Inc | PUSHBUTTON SWITCH 8000 RoHS : Compliant |
| 0 | ||
| MA912.W.A.BI.001 | Taoglas Antenna Solutions | MA912.W.A.BI.001 2*LTE MIMO Adhesive Mount White Antenna RoHS : Compliant |
| 0 | ||
| S3TL-H05-12WA | IDEC Corporation | FERRULE 20AWG ORANGE 12L RoHS : Compliant |
| 0 | ||
| A22NLMPMTWAP002WA | OMRON Industrial Automation | PSHIN PRJ BM BZL WHTE RoHS : Compliant |
| 0 | ||
| CTC-12-WAY-RECEPT-BLACK | ITT Interconnect Solutions | CTC 12 WAY RECEPT BLACK RoHS : Compliant |
| 0 | ||
![]() Neutron USA | RK12WALLOA | StarTech | 12U WALL MOUNT SVR RACK EQUIPMENT RACK 12-20IN DEPTH |
| 132 | |
| RK12WALLO | StarTech | 12U WALL MOUNT SERVER RACK EQUIPMENT RACK 12IN DEPTH |
| 123 | ||
| RK12WALHM | StarTech | 12U SVR RACK ENCLOSURE WITH HINGE WALL MOUNT NETWORK RACK---- NCNR |
| 121 | ||
| 132-W-AB-1/2 | ABB Low Voltage Products and Systems | Junction Boxes 2GNG DEV BX, 1/2KO ANGLEBRK |
| 50 | ||
| BB-485USBTB-2W-A | Advantech Co Ltd | USB to RS-485 2 Wire (Terminal Block) Converter, ULI-361T RoHS : Compliant |
| 50 | ||
| TL1275CA2WA500QPR | E-Switch Inc | Tactile Switches TACT, 50mA 12VDC, SPST-NO Off-(On), Panel Mount Wire Leads 500mm, w/ Connector RoHS : Compliant |
| 50 | ||
| RK812WALLO | StarTech | StarTech.com 8U Open Frame Wall Mount Equipment Rack - 12in Deep |
| 50 | ||
| 8442WAD | APEM Inc | Pushbutton Switches PUSHBUTTON SWITCH 8000 RoHS : Compliant |
| 44 | ||
| RK1232WALHM | StarTech | 12U SVR RACK ENCLOSURE WITH HINGE WALL MOUNT NETWORK RACK |
| 24 | ||
| NPORT 5232 W/ ADAPTER | Moxa Inc | 2 port RS-422/485 device server, 10/100M Ethernet, terminal block, 15KV ESD, 12-30VDC |
| 23 | ||
| C2WA00418 | Norgren | FLOW CONTROL, 1/4X1/8 Banjo-In |
| 10 | ||
| KFD2-WAC2-EX1.D | PEPPERL + FUCHS AUTOMATION | Strain Gauge Converter, Strain gauge input, Out: control side, Relay/Analog, screw terminals |
| 5 | ||
| S100PTVD2WASQ | Banner Engineering Corp | HMI Displays & Panel PCs S100 Pro Touch Display with Modbus ; Two Row Dot Matrix White Display; RGB Indicator LEDs ; 100 mm Diameter; Polycarbonate Housing; Smoky Window ; 12-30 V dc; IP69K; Integral 4-pin M12 QD |
| 4 | ||
| WAKW 4.5T-2-WASW 4.5T | TURCK Inc | Cordset, M12 Female Straight 5pos to Str M12 Male 5pos, 4x22AWG 1x20AWG, 2m, PVC, Gray, U3206-1 |
| 0 | ||
| DVA-2WA | Cooper Interconnect | Viking Electronics DVA-2WA Telephone Recorder |
| 0 | ||
![]() Pasternack Enterprises US | PE2WAN028-15KF | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-28, Gain Min: 15, Beam Width, 3dB V: 32, Beam Width, 3dB H: 31, Frequency, Min: 26.5 GHz, Frequency, Max: 40 GHz. WR-28 Standard Gain Horn with 15 dBi gain, 2.92mm Female connector, with Pre-Installed L Mount. The PE2WAN028-15KF standard gain horn antenna with a pre-installed L mount (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-28 input and a waveguide to coaxial transition adapter. Our WR-28 waveguide antenna features a 2.92mm female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-28 standard gain horn antenna with a 2.92mm female input has a minimum frequency of 26.5 GHz and a maximum frequency of 40 GHz. Pasternack’s PE2WAN028-15KF waveguide horn antenna has a typical gain of 15 dBi. Our waveguide antenna has a typical vertical beam width of 32 degrees and a horizontal beam width of 31 degrees at 3 dB. This antenna has a length of 5.05 inches, a width of 3.91 inches, and a weight of 0.79 lbs. This WR-28 waveguide horn antenna with 15 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a 2.92mm female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 1 | |
| PE2WAN028-10KM | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-28, Gain Min: 10, Beam Width, 3dB V: 51.6, Beam Width, 3dB H: 52.1, Frequency, Min: 26.5 GHz, Frequency, Max: 40 GHz. WR-28 Standard Gain Horn with 10 dBi gain, 2.92mm Male connector, with Pre-Installed L Mount. The PE2WAN028-10KM standard gain horn antenna with a pre-installed L mount (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-28 input and a waveguide to coaxial transition adapter. Our WR-28 waveguide antenna features a 2.92mm male connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-28 standard gain horn antenna with a 2.92mm male input has a minimum frequency of 26.5 GHz and a maximum frequency of 40 GHz. Pasternack’s PE2WAN028-10KM waveguide horn antenna has a typical gain of 10 dBi. Our waveguide antenna has a typical vertical beam width of 51.6 degrees and a horizontal beam width of 52.1 degrees at 3 dB. This antenna has a length of 4.74 inches, a width of 3.9 inches, and a weight of 0.48 lbs. This WR-28 waveguide horn antenna with 10 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a 2.92mm male interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 1 | ||
| PE2WAN042-20SF | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-42, Gain Min: 20, Beam Width, 3dB V: 17.3, Beam Width, 3dB H: 17.5, Frequency, Min: 18 GHz, Frequency, Max: 26.5 GHz. WR-42 Standard Gain Horn with 20 dBi gain, SMA Female connector, with Pre-Installed L Mount. The PE2WAN042-20SF standard gain horn antenna with a pre-installed L mount (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-42 input and a waveguide to coaxial transition adapter. Our WR-42 waveguide antenna features an SMA female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-42 standard gain horn antenna with an SMA female input has a minimum frequency of 18 GHz and a maximum frequency of 26.5 GHz. Pasternack’s PE2WAN042-20SF waveguide horn antenna has a typical gain of 20 dBi. Our waveguide antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. This antenna has a length of 9.67 inches, a width of 6.77 inches, and a weight of 0.78 lbs. This WR-42 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 1 | ||
| PE2WAN034-20KF | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-34, Gain Min: 20, Beam Width, 3dB V: 17.3, Beam Width, 3dB H: 17.5, Frequency, Min: 22 GHz, Frequency, Max: 33 GHz. WR-34 Standard Gain Horn Antenna Operating from 22 GHz to 33 GHz, 2.92mm Female Connector, 20 dBi Gain, UG-1530/U Flange with L Mount. The PE2WAN034-20KF standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-34 input and a waveguide to coaxial transition adapter. Our WR-34 waveguide antenna features a 2.92mm female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-34 standard gain horn antenna with a 2.92mm female input has a minimum frequency of 22 GHz and a maximum frequency of 33 GHz. Pasternack’s PE2WAN034-20KF waveguide horn antenna has a typical gain of 20 dBi. Our waveguide antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. This antenna has a length of 6.81 inches, a width of 3.15 inches, and a weight of 0.9 lbs. This WR-34 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a 2.92mm female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
| PE2WAN229-10NF | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-229, Gain Min: 10, Beam Width, 3dB V: 51.6, Beam Width, 3dB H: 52.1, Frequency, Min: 3.3 GHz, Frequency, Max: 4.9 GHz. WR-229 Standard Gain Horn Antenna Operating from 3.3 GHz to 4.9 GHz, N Female Connector, 10 dBi Nominal Gain, with L Mount. The PE2WAN229-10NF standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-229 input and a waveguide to coaxial transition adapter. Our WR-229 waveguide antenna features a type N female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-229 standard gain horn antenna with a type N female input has a minimum frequency of 3.3 GHz and a maximum frequency of 4.9 GHz. Pasternack’s PE2WAN229-10NF waveguide horn antenna has a typical gain of 10 dBi. Our waveguide antenna has a typical vertical beam width of 51.6 degrees and a horizontal beam width of 52.1 degrees at 3 dB. This antenna has a length of 8.75 inches, a width of 5.12 inches, and a weight of 14.51 lbs. This WR-229 waveguide horn antenna with 10 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a type N female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
| PE2WAN034-20 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-34, Frequency, Min: 22 GHz, Frequency, Max: 33 GHz, Beam Width V: 17.3, Beam Width H: 17.5. WR-34 Standard Gain Horn Antenna Operating From 22 GHz to 33 GHz, 20 dBi Nominal Gain, UG-1530/U Flange with L Mount. Pasternack’s PE2WAN034-20 WR-34 waveguide horn is also known as a waveguide horn antenna. This WR-34 standard gain horn waveguide antenna with a pre-installed L mount has a nominal gain of 20 dBi. Our waveguide horn can operate at frequencies ranging from 22 to 33 GHz. The standard gain horn antenna with linear polarization has a typical VSWR of 1.3:1 and is suitable for test and measurement industries. This 20 dBi waveguide horn from Pasternack has an overall length of 6.81 inches, a width of 3.15 inches, and a weight of 0.85 lbs. Our WR-34 waveguide horn antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. Our antenna comes with a UG-1530/U square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-34 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-34 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
| PE2WAN034-15 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-34, Frequency, Min: 22 GHz, Frequency, Max: 33 GHz, Beam Width V: 32, Beam Width H: 31. WR-34 Standard Gain Horn Antenna Operating From 22 GHz to 33 GHz, 15 dBi Nominal Gain, UG-1530/U Flange with L Mount. Pasternack’s PE2WAN034-15 WR-34 waveguide horn is also known as a waveguide horn antenna. This WR-34 standard gain horn waveguide antenna with a pre-installed L mount has a nominal gain of 15 dBi. Our waveguide horn can operate at frequencies ranging from 22 to 33 GHz. The standard gain horn antenna with linear polarization has a typical VSWR of 1.3:1 and is suitable for test and measurement industries. This 15 dBi waveguide horn from Pasternack has an overall length of 4.72 inches, a width of 3.15 inches, and a weight of 0.78 lbs. Our WR-34 waveguide horn antenna has a typical vertical beam width of 32 degrees and a horizontal beam width of 31 degrees at 3 dB. Our antenna comes with a UG-1530/U square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-34 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-34 waveguide horn antenna with 15 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
| PE2WAN159-10SF | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-159, Gain Min: 10, Beam Width, 3dB V: 51.6, Beam Width, 3dB H: 52.1, Frequency, Min: 4.9 GHz, Frequency, Max: 7.05 GHz. WR-159 Standard Gain Horn Antenna Operating from 4.9 GHz to 7.05 GHz, SMA Female Connector, 10 dBi Nominal Gain, with L Mount. The PE2WAN159-10SF standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-159 input and a waveguide to coaxial transition adapter. Our WR-159 waveguide antenna features an SMA female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-159 standard gain horn antenna with an SMA female input has a minimum frequency of 4.9 GHz and a maximum frequency of 7.05 GHz. Pasternack’s PE2WAN159-10SF waveguide horn antenna has a typical gain of 10 dBi. Our waveguide antenna has a typical vertical beam width of 51.6 degrees and a horizontal beam width of 52.1 degrees at 3 dB. This antenna has a length of 7.52 inches, a width of 4.33 inches, and a weight of 2.4 lbs. This WR-159 waveguide horn antenna with 10 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
| PE2WAN159-15NF | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-159, Gain Min: 15, Beam Width, 3dB V: 32, Beam Width, 3dB H: 31, Frequency, Min: 4.9 GHz, Frequency, Max: 7.05 GHz. WR-159 Standard Gain Horn Antenna Operating from 4.9 GHz to 7.05 GHz, N Female Connector, 15 dBi Nominal Gain, with L Mount. The PE2WAN159-15NF standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-159 input and a waveguide to coaxial transition adapter. Our WR-159 waveguide antenna features a type N female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-159 standard gain horn antenna with a type N female input has a minimum frequency of 4.9 GHz and a maximum frequency of 7.05 GHz. Pasternack’s PE2WAN159-15NF waveguide horn antenna has a typical gain of 15 dBi. Our waveguide antenna has a typical vertical beam width of 32 degrees and a horizontal beam width of 31 degrees at 3 dB. This antenna has a length of 8.97 inches, a width of 4.33 inches, and a weight of 1.54 lbs. This WR-159 waveguide horn antenna with 15 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a type N female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
| PE2WAN137-20NF | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-137, Gain Min: 20, Beam Width, 3dB V: 17.3, Beam Width, 3dB H: 17.5, Frequency, Min: 5.85 GHz, Frequency, Max: 8.2 GHz. WR-137 Standard Gain Horn with 20 dBi gain, N Female Connector, with Pre-Installed L Mount. The PE2WAN137-20NF standard gain horn antenna with a pre-installed L mount (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-137 input and a waveguide to coaxial transition adapter. Our WR-137 waveguide antenna features a type N female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-137 standard gain horn antenna with a type N female input has a minimum frequency of 5.85 GHz and a maximum frequency of 8.2 GHz. Pasternack’s PE2WAN137-20NF waveguide horn antenna has a typical gain of 20 dBi. Our waveguide antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. This antenna has a length of 10.71 inches, a width of 4.69 inches, and a weight of 1.67 lbs. This WR-137 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a type N female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
| PE2WAN137-10NF | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-137, Gain Min: 10, Beam Width, 3dB V: 51.6, Beam Width, 3dB H: 52.1, Frequency, Min: 5.85 GHz, Frequency, Max: 8.2 GHz. WR-137 Standard Gain Horn with 10 dBi gain, N Female Connector, with Pre-Installed L Mount. The PE2WAN137-10NF standard gain horn antenna with a pre-installed L mount (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-137 input and a waveguide to coaxial transition adapter. Our WR-137 waveguide antenna features a type N female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-137 standard gain horn antenna with a type N female input has a minimum frequency of 5.85 GHz and a maximum frequency of 8.2 GHz. Pasternack’s PE2WAN137-10NF waveguide horn antenna has a typical gain of 10 dBi. Our waveguide antenna has a typical vertical beam width of 51.6 degrees and a horizontal beam width of 52.1 degrees at 3 dB. This antenna has a length of 7.02 inches, a width of 4.33 inches, and a weight of 2.03 lbs. This WR-137 waveguide horn antenna with 10 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a type N female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
| PE2WAN187-20NF | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-187, Gain Min: 20, Beam Width, 3dB V: 17.3, Beam Width, 3dB H: 17.5, Frequency, Min: 3.95 GHz, Frequency, Max: 5.85 GHz. WR-187 Standard Gain Horn with 20 dBi gain, N Female Connector, with Pre-Installed L Mount. The PE2WAN187-20NF standard gain horn antenna with a pre-installed L mount (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-187 input and a waveguide to coaxial transition adapter. Our WR-187 waveguide antenna features a type N female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-187 standard gain horn antenna with a type N female input has a minimum frequency of 3.95 GHz and a maximum frequency of 5.85 GHz. Pasternack’s PE2WAN187-20NF waveguide horn antenna has a typical gain of 20 dBi. Our waveguide antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. This antenna has a length of 14.23 inches, a width of 6.72 inches, and a weight of 2.21 lbs. This WR-187 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a type N female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
| PE2WAN229-15SF | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-229, Gain Min: 15, Beam Width, 3dB V: 32, Beam Width, 3dB H: 31, Frequency, Min: 3.3 GHz, Frequency, Max: 4.9 GHz. WR-229 Standard Gain Horn Antenna Operating from 3.3 GHz to 4.9 GHz, SMA Female Connector, 15 dBi Nominal Gain, with L Mount. The PE2WAN229-15SF standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-229 input and a waveguide to coaxial transition adapter. Our WR-229 waveguide antenna features an SMA female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-229 standard gain horn antenna with an SMA female input has a minimum frequency of 3.3 GHz and a maximum frequency of 4.9 GHz. Pasternack’s PE2WAN229-15SF waveguide horn antenna has a typical gain of 15 dBi. Our waveguide antenna has a typical vertical beam width of 32 degrees and a horizontal beam width of 31 degrees at 3 dB. This antenna has a length of 11.43 inches, a width of 5.12 inches, and a weight of 1.9 lbs. This WR-229 waveguide horn antenna with 15 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
| PE2WAN034-10 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-34, Frequency, Min: 22 GHz, Frequency, Max: 33 GHz, Beam Width V: 51.6, Beam Width H: 52.1. WR-34 Standard Gain Horn Antenna Operating From 22 GHz to 33 GHz, 10 dBi Nominal Gain, UG-1530/U Flange with L Mount. Pasternack’s PE2WAN034-10 WR-34 waveguide horn is also known as a waveguide horn antenna. This WR-34 standard gain horn waveguide antenna with a pre-installed L mount has a nominal gain of 10 dBi. Our waveguide horn can operate at frequencies ranging from 22 to 33 GHz. The standard gain horn antenna with linear polarization has a typical VSWR of 1.3:1 and is suitable for test and measurement industries. This 10 dBi waveguide horn from Pasternack has an overall length of 4.17 inches, a width of 3.15 inches, and a weight of 0.76 lbs. Our WR-34 waveguide horn antenna has a typical vertical beam width of 51.6 degrees and a horizontal beam width of 52.1 degrees at 3 dB. Our antenna comes with a UG-1530/U square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-34 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-34 waveguide horn antenna with 10 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
| PE2WAN051-20 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-51, Frequency, Min: 15 GHz, Frequency, Max: 22 GHz, Beam Width V: 17.3, Beam Width H: 17.5. WR-51 Standard Gain Horn Antenna Operating From 15 GHz to 22 GHz, 20 dBi Nominal Gain, with L Mount. Pasternack’s PE2WAN051-20 WR-51 waveguide horn is also known as a waveguide horn antenna. This WR-51 standard gain horn waveguide antenna with a pre-installed L mount has a nominal gain of 20 dBi. Our waveguide horn can operate at frequencies ranging from 15 to 22 GHz. The standard gain horn antenna with linear polarization has a typical VSWR of 1.3:1 and is suitable for test and measurement industries. This 20 dBi waveguide horn from Pasternack has an overall length of 14.77 inches, a width of 7 inches, and a weight of 1.06 lbs. Our WR-51 waveguide horn antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. Our antenna comes with a square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-51 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-51 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
![]() Vyrian | AD5822-WAFER | Analog Devices Inc | 5,200 | |||
| ADP1762WACPZ1.25-R7 | Analog Devices Inc | Fixed Positive LDO Regulator, 1.25V, 0.095V Dropout, CMOS RoHS : Compliant | 4,950 | |||
| AD8232WACSZ-R7 | Analog Devices Inc | Analog Circuit, 1 Func, 1 Channel RoHS : Compliant | 3,000 | |||
| AD8232WACSZ | Analog Devices Inc | Analog Circuit, 1 Func, 1 Channel RoHS : Compliant | 2,650 | |||
| ADP1762WACPZ-0.9-R7 | Analog Devices Inc | Fixed Positive LDO Regulator, 0.9V, CMOS RoHS : Compliant | 2,500 | |||
| FTR-P6GN012WADP | FUJITSU Limited | RoHS : Unknown | 2,500 | |||
| AD8232WACSZ-RL | Analog Devices Inc | Analog Circuit, 1 Func, 1 Channel RoHS : Compliant | 2,400 | |||
| AX211.D2WAGQ Q | Intel Corporation | 2,200 | ||||
ADM6822WART-RL7![]() | Analog Devices Inc | Power Supply Management Circuit, Fixed, 1 Channel, PDSO5 RoHS : Not Compliant | 810 | |||
| M28010-12WA6T | STMicroelectronics | 290 | ||||
| M28010-12WA6 | STMicroelectronics | 230 | ||||
| ADP7142WAUJZ-1-8-R7 | Analog Devices Inc | 230 | ||||
| ADP7142WAUJZ-3-3-R7 | Analog Devices Inc | 140 | ||||
| ADUM3472WARSZ | Analog Devices Inc | Interface Circuit, PDSO20 RoHS : Compliant | 120 | |||
| ADUM3472WARSZ-RL7 | Analog Devices Inc | Interface Circuit, PDSO20 RoHS : Compliant | 85 | |||
![]() Win Source Electronics | ADA4096-2WARMZ-R7![]() | Analog Devices Inc | 30 V, Micropower, Overvoltage Protection | IC OPAMP GP 2 CIRCUIT 8MSOP RoHS : Compliant |
| 34,000 | |
| ADA4096-2WARMZ | Analog Devices Inc | ADI 30V,Micropower, OVP, RRIO OpAmp |
| 34,000 | ||
ADA4096-2WARMZ-RL![]() | Analog Devices Inc | IC OPAMP GP 2 CIRCUIT 8MSOP / General Purpose Amplifier 2 Circuit Rail-to-Rail 8-MSOP RoHS : Compliant |
| 30,630 | ||
AD8602WARZ-RL![]() | Analog Devices Inc | IC CMOS 2 CIRCUIT 8SOIC / CMOS Amplifier 2 Circuit Rail-to-Rail 8-SOIC RoHS : Compliant |
| 22,000 | ||
ADXL312WACPZ![]() | Analog Devices Inc | ACCEL 1.5-12G I2C/SPI 32LFCSP / Accelerometer X, Y, Z Axis ±1.5g, 3g, 6g, 12g 3.125Hz ~ 1.6kHz 32-LFCSP-LQ (5x5) RoHS : Compliant |
| 18,000 | ||
ADXL312WACPZ-RL![]() | Analog Devices Inc | IC ACCEL SPI/I2C 3AX 32LFCSP RoHS : Compliant |
| 16,290 | ||
AD8692WARMZ-REEL![]() | Analog Devices Inc | IC OPAMP GP 10MHZ RRO 8MSOP RoHS : Compliant |
| 3,330 | ||
| AD8692WARMZ | Analog Devices Inc | DUAL, PRECISION CMOS RAIL-RAIL OP AMP |
| 2,915 | ||
| AD8602WARZ | Analog Devices Inc | Precision CMOS R-R OPAMP |
| 2,070 | ||
AD8602WARZ-R7![]() | Analog Devices Inc | IC OPAMP GP 8.4MHZ RRO 8SOIC RoHS : Compliant |
| 1,895 |
| ALLDATASHEET vous a-t-il été utile ? [ DONATE ] |
À propos de Alldatasheet | Publicité | Contactez-nous | Politique de confidentialité | Lien vers la fiche technique | Echange de liens | Fabricants All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |