28ZL-R Price, revendeur, Stock

These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.When blind-threaded types are used outer sheet surfaces are not only flush but closed as

1 : $1.104
100 : $0.9936
500 : $0.8832
1,000 : $0.8004
5,000 : $0.8004

15,611

FHL-032-8ZI

PennEngineering (PEM)

PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly

1 : $0.1404
100 : $0.1264
500 : $0.1123
1,000 : $0.1018
5,000 : $0.1018

4,958

FHL-632-8ZI

PennEngineering (PEM)

PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly

1 : $0.0691
100 : $0.064
500 : $0.0557
1,000 : $0.0531
5,000 : $0.0517

1,990

BSO-032-28ZI

PennEngineering (PEM)

These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.When blind-threaded types are used outer sheet surfaces are not only flush but closed as

1 : $1.2456
100 : $1.121
500 : $0.9965
1,000 : $0.9031
5,000 : $0.9031

1,383

HFE-0420-28ZI

PennEngineering (PEM)

PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly

0

HFH-0420-28ZI

PennEngineering (PEM)

PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly

0

HFE-032-8ZI

PennEngineering (PEM)

PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly

0

FHD-832-8ZI

PennEngineering (PEM)

STUD, FLUSH, STEEL; DOG POINT 8-32THREAD

0

TFH-032-8ZI

PennEngineering (PEM)

PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly

0

FHD-632-8ZI

PennEngineering (PEM)

STUD, FLUSH, STEEL; DOG POINT 6-32THREAD

0

HFH-032-28ZI

PennEngineering (PEM)

PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly

0

HFE-032-28ZI

PennEngineering (PEM)

PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly

0

SCB-632-8ZI

PennEngineering (PEM)

SPINNING CLINCH BOLT 632-8 6-32 THRD

0

TFH-832-8ZI

PennEngineering (PEM)

PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly

0

SO-832-28ZI

PennEngineering (PEM)

These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.PEM� brand thru-hole threaded standoffs are installed with their heads flush with one surf

0