 |
Moteur de recherche de fiches techniques de composants électroniques |
|
|
Moteur de recherche de fiches techniques de composants électroniques |
|
2074FBD-R revendeur |
| revendeur | No de pièce | Fabricant | Description | Price | Qty. BuyNow | |
 TME | 2-172074-1 | TE Connectivity | Connector: wire-wire; female; Automotive; straight; for cable RoHS : Compliant |
| 8,000 | |
| 55091-2074 | Molex | Connector: PCB to PCB; plug; data; PIN: 200; vertical; Inom: 500mA RoHS : Compliant |
| 5,000 | ||
| 53112074 | Lapp Group | Cable gland; NPT2"; IP68; brass; SKINTOP®; SKINTOP® MS NPT RoHS : Compliant |
| 1 | ||
| 088-2-074-0-F-XS0-1590 | MPE-Garry GmbH | Connector: pin strips; socket; male; data; PIN: 74; THT; angled; 2x37 RoHS : Compliant |
| 0 | ||
| 088-2-074-0-T-XS0-1380 | MPE-Garry GmbH | Connector: pin strips; socket; male; data; PIN: 74; THT; angled; 2x37 RoHS : Compliant |
| 0 | ||
| 1120749 | Lapp Group | Wire; ÖLFLEX® CLASSIC 110 LT; 25G1mm2; unshielded; 300V,500V; Cu RoHS : Compliant |
| 0 | ||
| 20743 | as Schwabe | Extension lead; H07BQ-F; 3G2.5mm2; 40m; rubber; orange; 16A |
| 0 | ||
| 69942074 | WERMA SIGNALTECHNIK GMBH + CO KG | Signalling column; red/green; LED; 12VDC; 12VAC; IP65; Ø38x141mm |
| 0 | ||
| HFS-819 303 090 A 20743 RV7-Z | Ingun Prufmittelbau GmbH | Test probe: RF; 3A; Ø: 0.9mm; HFS-819; CuBe; 20.7N; screw-in; 100Ω |
| 0 | ||
| M80-8820742 | Harwin | Connector: wire-wire/PCB; socket; male; data; Datamate L-Tek; 3A RoHS : Compliant |
| 0 | ||
| 087-2-074-0-T-XS0-1020 | MPE-Garry GmbH | Connector: pin strips; socket; male; data; PIN: 74; THT; straight RoHS : Compliant |
| 0 | ||
| 087-2-074-0-T-XS0-1390 | MPE-Garry GmbH | Connector: pin strips; socket; male; data; PIN: 74; THT; straight RoHS : Compliant |
| 0 | ||
| 089-2-074-0-F-XS0-2900 | MPE-Garry GmbH | Connector: pin strips; socket; male; data; PIN: 74; THT; straight RoHS : Compliant |
| 0 | ||
| 089-2-074-0-S-XS0-3780 | MPE-Garry GmbH | Connector: pin strips; socket; male; data; PIN: 74; THT; straight RoHS : Compliant |
| 0 | ||
| 089-2-074-0-T-XS0-2490 | MPE-Garry GmbH | Connector: pin strips; socket; male; data; PIN: 74; THT; straight RoHS : Compliant |
| 0 | ||
 Analog Devices Inc | MAX20745EPL+T | Analog Devices Inc | 25A POL w/NO PMBUS RoHS : Compliant |
| 18,330 | |
| MAX20747AAALT+T | Analog Devices Inc | Common foot print 4 X 6 power |
| 17,500 | ||
| MAX20745EPL+ | Analog Devices Inc | 25A POL w/NO PMBUS RoHS : Compliant | 309 | |||
| MAX20747AAALT+ | Analog Devices Inc | Common foot print 4 X 6 power |
| 103 | ||
| MAX20743EPL+T | Analog Devices Inc | 35A POL w/PMBUS GM (Stella 3 T RoHS : Compliant |
| 54 | ||
| MAX20745EVKIT# | Analog Devices Inc | 25A POL w/NO PMBUS EV Kit RoHS : Compliant |
| 12 | ||
| MAX20743EVKIT# | Analog Devices Inc | 35A POL w/NO PMBUS EV Kit |
| 6 | ||
| MAX20743EPL+ | Analog Devices Inc | 35A POL w/PMBUS GM (Stella 3 B RoHS : Compliant | 0 | |||
 Ameya Holding Limited | BU52074GWZ-E2 | ROHM Semiconductor | 两极检测（极性判别输出）霍尔IC RoHS : Compliant |
| 6,300 | |
 ComSIT USA | KQG2H0700X207430 | SMC CORPORATION | AVAILABLE EU | 63 | ||
ComSIT USA | SCB1207470M | Hua Jung Co Ltd | Electronic Component RoHS : Compliant | 920 | ||
| ULN2074NE | Texas Instruments | QUADRUPLE HIGH-CURRENT DARLINGTON SWITCH Power Bipolar Transistor, 4-Element, NPN, Silicon, Plastic/Epoxy, 16 Pin RoHS : Not Compliant | 600 | |||
| 2074417 | TE Connectivity | Rectangular Power Connector, 9 Contact(s), Male, Solder Terminal RoHS : Compliant | 280 | |||
TLE2074AIDWG4 | Texas Instruments | EXCALIBUR LOW-NOISE HIGH-SPEED JFET-INPUT OPERATIONAL AMPLIFIER Operational Amplifier, 4 Func, 7000uV Offset-Max, BIFET, PDSO16 RoHS : Compliant | 139 | |||
TLE2074ACN | Texas Instruments | EXCALIBUR LOW-NOISE HIGH-SPEED JFET-INPUT OPERATIONAL AMPLIFIER Operational Amplifier, 4 Func, 5100uV Offset-Max, BIFET, PDIP14 RoHS : Compliant | 50 | |||
TLE2074CDW | Texas Instruments | EXCALIBUR LOW-NOISE HIGH-SPEED JFET-INPUT OPERATIONAL AMPLIFIER Operational Amplifier, 4 Func, 5000uV Offset-Max, BIFET, PDSO16 RoHS : Compliant | 40 | |||
ULN2074B | STMicroelectronics | 50V-1.5A QUAD DARLINGTON SWITCH Power Bipolar Transistor, 1.75A I(C), 35V V(BR)CEO, 4-Element, NPN, Silicon, Plastic/Epoxy, 16 Pin RoHS : Compliant | 10 | |||
| TLE2074IDW | Texas Instruments | EXCALIBUR LOW-NOISE HIGH-SPEED JFET-INPUT OPERATIONAL AMPLIFIER Operational Amplifier, 4 Func, 5000uV Offset-Max, BIFET, PDSO16 RoHS : Compliant | 5 | |||
 Avnet Silica | TMC2074-NU | Microchip Technology Inc | DUAL MODE CIRCLINK CONTROLLER (Alt: TMC2074-NU) RoHS : Compliant | 0 | ||
| R7FA0E2074CFM#HA0 | Renesas Electronics Corporation | (Alt: R7FA0E2074CFM#HA0) RoHS : Compliant | 0 | |||
MIC5207-4.0YM5-TR | Microchip Technology Inc | (Alt: MIC5207-4.0YM5-TR) RoHS : Compliant | 0 | |||
| R7FA0E2074CFL#BA0 | Renesas Electronics Corporation | (Alt: R7FA0E2074CFL#BA0) RoHS : Compliant | 0 | |||
| DSC1001DL2-074.2500 | Microchip Technology Inc | MEMS Oscillator 7425 MHz SMD 25mm x 2mm 25 ppm 33 V DSC1001 (Alt: DSC1001DL2-074.2500) RoHS : Compliant | 0 | |||
DSC1001CI2-074.2500T-3.20-mm-x-2.50-mm.jpg) | Microchip Technology Inc | MEMS Oscillator 7425 MHz SMD 32mm x 25mm 25 ppm 33 V DSC1001 (Alt: DSC1001CI2-074.2500T) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | AANE-WH-0207-4 | Abracon Corporation | RoHS : Compliant |
| 0 | |
 EBV Elektronik | TMC2074-NU | Microchip Technology Inc | DUAL MODE CIRCLINK CONTROLLER (Alt: TMC2074-NU) RoHS : Compliant | 0 | ||
| 20742-001-XTD | onsemi | HART 111 (Alt: 20742-001-XTD) RoHS : Compliant | 0 | |||
| L20740_KONNTAKT-1 | LEDIL | KONNTAKT parts for HEKLAKONNTAKT connectors (Alt: L20740_KONNTAKT-1) RoHS : Compliant | 0 | |||
| MIC5207-4.0YM5-TR | Microchip Technology Inc | (Alt: MIC5207-4.0YM5-TR) RoHS : Compliant | 0 | |||
| SGM2074-3.3XN5G/TR | SG Micro Corp | SGM2074 500mA Fast Load Transient Response 12V Logic Low Noise Low Dropout (Alt: SGM2074-3.3XN5G/TR) RoHS : Compliant | 0 | |||
| DSC1001DL2-074.2500 | Microchip Technology Inc | MEMS Oscillator 7425 MHz SMD 25mm x 2mm 25 ppm 33 V DSC1001 (Alt: DSC1001DL2-074.2500) RoHS : Compliant | 0 | |||
| DSC1123CI2-074.2500 | Microchip Technology Inc | LowJitter Precision LVDS Oscillator VDFN 32mm x 25mm (Alt: DSC1123CI2-074.2500) RoHS : Compliant | 0 | |||
| DSC1001CI2-074.2500T | Microchip Technology Inc | (Alt: DSC1001CI2-074.2500T) RoHS : Compliant | 0 | |||
 Flip Electronics | CYW20742A2KFB1GT | Infineon Technologies AG | Stock, Ship Today | 6,000 | ||
 Maritex | 172074-1 | TE Connectivity | Terminal Housings; 172074-1; TE CONNECTIVITY; Natural; Receptacle; Quick Connect; Straight RoHS : Compliant |
| 75,184 | |
| 207463-1 | TE Connectivity | D-Sub Connectors; 207463-1; TE CONNECTIVITY; Receptacle; Yes RoHS : Compliant |
| 4,652 | ||
| 2074790004 | Molex | Male Pin Headers; 2074790004; MOLEX; 1; Tin; 4; Vertical RoHS : Compliant |
| 530 | ||
| 207439-1 | TE Connectivity | Rectangular Connector Housings; 207439-1; TE CONNECTIVITY; 3; 9; Red; Straight RoHS : Compliant |
| 355 | ||
| 1-292207-4 | TE Connectivity | Male Pin Headers; 1-292207-4; TE CONNECTIVITY; 1; Tin; 14; 14 RoHS : Compliant |
| 268 | ||
| 207464-7 | TE Connectivity | D-Sub Connectors; 207464-7; TE CONNECTIVITY; D-Sub; Yes; Straight; 53.03 mm RoHS : Compliant |
| 224 | ||
| 3-122-074 | Schurter Electronic Components | Power Input Modules (PEM); 3-122-074 RoHS : Compliant |
| 100 | ||
| 207464-2 | TE Connectivity | D-Sub Connectors; 207464-2; TE CONNECTIVITY; D-Sub; 53.03 mm; Yes; Male RoHS : Compliant |
| 90 | ||
| JPRH 1207-470M-3R3-A | Jantek Electronics Co. | Inductor; SMD; 47uH; 3.3A; 0.082R; 12.5x12.5x8mm; 20% |
| 42 | ||
| 207440-1 | TE Connectivity | Rectangular Connector Housings; 207440-1; TE CONNECTIVITY; 3; 9; Red; Straight RoHS : Compliant |
| 40 | ||
| 207485-1 | TE Connectivity | Circular Connectors; 207485-1; TE CONNECTIVITY; 16; 16; Cable, Free Hanging; Yes RoHS : Compliant |
| 29 | ||
 Pasternack Enterprises US | PE3C6207-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 48 inches. Plenum SMA Male to SMA Male Low PIM Cable 48 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum SMA male to SMA male low PIM cable 48 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum SMA male to SMA male low PIM cable 48 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-SM-LP SMA to TC-SPP250-SM-LP SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-SM-LP SMA cable connection on one end and TC-SPP250-SM-LP SMA cable connection on the other. Our low PIM TC-SPP250-SM-LP SMA to TC-SPP250-SM-LP SMA cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP250-SM-LP SMA to TC-SPP250-SM-LP SMA cable is a male to male coax assembly, PE3C6207-48, can also be known as a low PIM TC-SPP250-SM-LP SMA plug to TC-SPP250-SM-LP SMA plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-SM-LP SMA plug to TC-SPP250-SM-LP SMA plug cable assembly PE3C6207-48 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-SM-LP SMA cable assembly is manufactured with TC-SPP250-SM-LP SMA to TC-SPP250-SM-LP SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-SM-LP SMA male to TC-SPP250-SM-LP SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-SPP250-SM-LP SMA plug to TC-SPP250-SM-LP SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-SM-LP SMA to TC-SPP250-SM-LP SMA cable assembly for quick shipment worldwide. Variations of TC-SPP250-SM-LP SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum SMA male to SMA male low PIM cable 48 inch length using SPP-250-LLPL coax using Times Microwave parts. |
| 18 | |
| PE7207-40 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Power Maximum: 100 Watt, VSWR Maximum: 1.45:1, Attenuation: 40 dB, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Series 2: N, Connector Gender 2: Male, Body Material: Black Anodized Aluminum Heatsink. 40 dB Fixed Attenuator, 7/16 DIN Female To N Male Directional Black Anodized Aluminum Heatsink Body Rated To 100 Watts Up To 6 GHz. PE7207-40 is a fixed 40 dB attenuator from Pasternack. This 40dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 7/16 DIN attenuator has a female gender on side 1 and a type N male connector on side 2. The Pasternack PE7207-40 40 dB attenuator is rated for up to 6 GHz. Our microwave attenuator is rated to 100 Watts at the stated attenuation value. Our fixed RF attenuator PE7207-40 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 40dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 7 | ||
| PE3W20743LF | Pasternack Enterprises | Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: C, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. HN Male Right Angle to C Male Cable Using RG214 Coax, LF Solder. PE3W20743LF is a HN male right angle to C male cable using RG214 coax. This Pasternack HN male right angle to C male cable assembly uses a 50 Ohm HN for connector 1 and a 50 Ohm C for connector 2. HN right angle to C coaxial cable assembly uses 90 degree right angle coax cable connector. Our male HN right angle to male C cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20743LF HN male right angle to C male cable assembly is constructed with RG214 coax. | 0 | |||
| PE3W02074LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.0/2.3, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. 1.0/2.3 Plug to 1.0/2.3 Plug Cable Using RG174 Coax, RoHS. PE3W02074LF is a 1.0/2.3 plug to 1.0/2.3 plug cable using RG174 coax. This Pasternack 1.0/2.3 plug to 1.0/2.3 plug cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm 1.0/2.3 for connector 2. Our plug 1.0/2.3 to plug 1.0/2.3 cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02074LF 1.0/2.3 plug to 1.0/2.3 plug cable assembly is constructed with RG174 coax. | 0 | |||
| PE3W02074-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 1.0/2.3 Plug to 1.0/2.3 Plug Cable 12 Inch Length Using RG174 Coax., Radio frequency assembly 1.0/2.3 plug to 1.0/2.3 plug cable 12 inch length using RG174 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.0/2.3 plug to 1.0/2.3 plug cable 12 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 1.0/2.3 to 1.0/2.3 cable assembly has plug gender on end 1 and plug on end 2. PE3W02074-12 can also be known as a 1.0/2.3 male to 1.0/2.3 male cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PE dielectric type. 1.0/2.3 male to 1.0/2.3 male cable assembly PE3W02074-12 is built with RG174 which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3W02074-12 RF cable are available on our downloadable PDF datasheet. 1.0/2.3 male to 1.0/2.3 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.0/2.3 RF cable assembly as per your requirements. |
| 0 | ||
| PE3W02074LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.0/2.3, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. 1.0/2.3 Plug to 1.0/2.3 Plug Cable Using RG174 Coax with HeatShrink, LF Solder. PE3W02074LF/HS is a 1.0/2.3 plug to 1.0/2.3 plug cable using RG174 coax. This Pasternack 1.0/2.3 plug to 1.0/2.3 plug cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm 1.0/2.3 for connector 2. Our plug 1.0/2.3 to plug 1.0/2.3 cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02074LF/HS 1.0/2.3 plug to 1.0/2.3 plug cable assembly is constructed with RG174 coax. | 0 | |||
| PE3W20742 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. MMCX Plug to SMA Female Cable Using PE-SR405FLJ Coax. PE3W20742 is a MMCX plug to SMA female cable using PE-SR405FLJ coax. This Pasternack MMCX plug to SMA female cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SMA for connector 2. Our plug MMCX to female SMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W20742 MMCX plug to SMA female cable assembly is constructed with PE-SR405FLJ coax. | 0 | |||
| PE3W22074 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to 4.3-10 Female Bulkhead Cable Using RG402 Coax. PE3W22074 is a BNC male right angle to 4.3-10 female bulkhead cable using RG402 coax. This Pasternack BNC male right angle to 4.3-10 female bulkhead cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm 4.3-10 for connector 2. BNC right angle to 4.3-10 coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to female 4.3-10 bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W22074 BNC male right angle to 4.3-10 female bulkhead cable assembly is constructed with RG402 coax. | 0 | |||
| PE3W16207-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-FR, RF Cable Type: LMR-400-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Fire Rated N Male Right Angle to Reverse Polarity SMA Plug Low Loss Cable 48 Inch Length Using LMR-400-FR Coax., Radio frequency assembly fire rated N male right angle to reverse polarity SMA plug low loss cable 48 inch length using LMR-400-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male right angle to reverse polarity SMA plug low loss cable 48 inch length using LMR-400-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a reverse polarity SMA cable connection on the other. Our low loss right angle type N to reverse polarity SMA cable assembly has a male gender on end 1 and a plug on end 2. PE3W16207-48 can also be known as a low loss right angle type N plug to reverse polarity SMA male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16207-48 RF cable has a FRPE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our right angle type N male to SMA plug cable has a maximum VSWR of 1.4:1. Type N plug to reverse polarity SMA male cable assembly PE3W16207-48 is built with LMR-400-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W16207-48 can also be used in the other direction and will be a reverse polarity SMA plug to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to SMA reverse polarity male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W20740-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMPS, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMPS Female to 2.4mm Male VITA 67.3 Cable 12 Inch Length Using PE-047SR Coax., Pasternack’s PE3W20740-12 VITA 67.3 SMPS female to 2.4mm male RF cable assembly using PE-047SR coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMPS female to 2.4mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMPS to 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax VITA 67.3 cable assembly is built with an SMPS cable connection on one end and a 2.4mm cable connection on the other. Our SMPS to 2.4mm cable assembly has a female gender on end 1 and a male on end 2. PE3W20740-12 can also be known as a VITA 67.3 SMPS jack to 2.4mm plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. Our VITA 67.3 cable is designed for use in high-density RF signal transmission applications in aerospace and defense, ground communication systems, radar systems, satellites, and embedded computing applications. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. This radio frequency cable assembly can withstand temperatures ranging from -55 to 100 degrees C. The semi-rigid RF cable has a between series connection. Our SMPS female to 2.4mm male cable has a maximum VSWR of 1.4:1. This PE3W20740-12 SMPS jack to 2.4mm plug cable assembly is built with PE-047SR, which is a semi-rigid coax type. The Pasternack semi-rigid SMPS cable assembly is manufactured with SMPS to 2.4mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method. Additional dimensions, specifications, and CAD drawings for this 12-inch-long VITA 67.3 RF cable are available on our downloadable PDF datasheet. PE3W20740-12 can also be used in the other direction and will be a 2.4mm male to SMPS female cable assembly if the opposite connectivity is required. This VITA 67.3 SMPS jack to 2.4mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMPS to 2.4mm cable assembly for quick shipment worldwide. Variations of SMPS and 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMPS to 2.4mm VITA 67.3 RF cable assembly as per your requirements. |
| 0 | ||
| PE3W20745 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. SMA Male to TNC Female Bulkhead Cable Using RG405 Coax. PE3W20745 is a SMA male to TNC female bulkhead cable using RG405 coax. This Pasternack SMA male to TNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our male SMA to female TNC bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W20745 SMA male to TNC female bulkhead cable assembly is constructed with RG405 coax. | 0 | |||
| PE34207-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length: 48 inches. N Male to N Male Right Angle Cable 48 Inch Length Using RG316-DS Coax., Radio frequency assembly N male to N male right angle cable 48 inch length using RG316-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male right angle cable 48 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and right angle type N cable connection on the other. Our N type to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly, PE34207-48, can also be known as a type N plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE34207-48 is built with RG316-DS which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency N type male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34207-48 can also be used in the other direction and will be right angle N type male to type N male cable assembly if the opposite connectivity is required. Type N plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle cable 48 inch length using RG316-DS coax. |
| 0 | ||
| PE3W20740-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMPS, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMPS Female to 2.4mm Male VITA 67.3 Cable 24 Inch Length Using PE-047SR Coax., Pasternack’s PE3W20740-24 VITA 67.3 SMPS female to 2.4mm male RF cable assembly using PE-047SR coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMPS female to 2.4mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMPS to 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax VITA 67.3 cable assembly is built with an SMPS cable connection on one end and a 2.4mm cable connection on the other. Our SMPS to 2.4mm cable assembly has a female gender on end 1 and a male on end 2. PE3W20740-24 can also be known as a VITA 67.3 SMPS jack to 2.4mm plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. Our VITA 67.3 cable is designed for use in high-density RF signal transmission applications in aerospace and defense, ground communication systems, radar systems, satellites, and embedded computing applications. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. This radio frequency cable assembly can withstand temperatures ranging from -55 to 100 degrees C. The semi-rigid RF cable has a between series connection. Our SMPS female to 2.4mm male cable has a maximum VSWR of 1.4:1. This PE3W20740-24 SMPS jack to 2.4mm plug cable assembly is built with PE-047SR, which is a semi-rigid coax type. The Pasternack semi-rigid SMPS cable assembly is manufactured with SMPS to 2.4mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method. Additional dimensions, specifications, and CAD drawings for this 24-inch-long VITA 67.3 RF cable are available on our downloadable PDF datasheet. PE3W20740-24 can also be used in the other direction and will be a 2.4mm male to SMPS female cable assembly if the opposite connectivity is required. This VITA 67.3 SMPS jack to 2.4mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMPS to 2.4mm cable assembly for quick shipment worldwide. Variations of SMPS and 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMPS to 2.4mm VITA 67.3 RF cable assembly as per your requirements. |
| 0 | ||
| PE3W20740 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMPS, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. SMPS Female to 2.4mm Male VITA 67.3 Cable Using PE-047SR Coax., Pasternack’s PE3W20740 VITA 67.3 SMPS female to 2.4mm male RF cable assembly using PE-047SR coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMPS female to 2.4mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMPS to 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax VITA 67.3 cable assembly is built with an SMPS cable connection on one end and a 2.4mm cable connection on the other. Our SMPS to 2.4mm cable assembly has a female gender on end 1 and a male on end 2. PE3W20740 can also be known as a VITA 67.3 SMPS jack to 2.4mm plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. Our VITA 67.3 cable is designed for use in high-density RF signal transmission applications in aerospace and defense, ground communication systems, radar systems, satellites, and embedded computing applications. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. This radio frequency cable assembly can withstand temperatures ranging from -55 to 100 degrees C. The semi-rigid RF cable has a between series connection. Our SMPS female to 2.4mm male cable has a maximum VSWR of 1.4:1. This PE3W20740 SMPS jack to 2.4mm plug cable assembly is built with PE-047SR, which is a semi-rigid coax type. The Pasternack semi-rigid SMPS cable assembly is manufactured with SMPS to 2.4mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method. Additional dimensions, specifications, and CAD drawings for this VITA 67.3 RF cable are available on our downloadable PDF datasheet. PE3W20740 can also be used in the other direction and will be a 2.4mm male to SMPS female cable assembly if the opposite connectivity is required. This VITA 67.3 SMPS jack to 2.4mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMPS to 2.4mm cable assembly for quick shipment worldwide. Variations of SMPS and 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMPS to 2.4mm VITA 67.3 RF cable assembly as per your requirements. | 0 | |||
| PE3W02074-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. 1.0/2.3 Plug to 1.0/2.3 Plug Cable 72 Inch Length Using RG174 Coax., Radio frequency assembly 1.0/2.3 plug to 1.0/2.3 plug cable 72 inch length using RG174 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.0/2.3 plug to 1.0/2.3 plug cable 72 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 1.0/2.3 to 1.0/2.3 cable assembly has plug gender on end 1 and plug on end 2. PE3W02074-72 can also be known as a 1.0/2.3 male to 1.0/2.3 male cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PE dielectric type. 1.0/2.3 male to 1.0/2.3 male cable assembly PE3W02074-72 is built with RG174 which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3W02074-72 RF cable are available on our downloadable PDF datasheet. 1.0/2.3 male to 1.0/2.3 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.0/2.3 RF cable assembly as per your requirements. |
| 0 | ||
 Vyrian | 102074 | Littelfuse Inc | Fuses/Accessories RoHS : Compliant | 12,876 | ||
| DS6207-4 | Analog Devices Inc | Memory Circuit, 384X1, CMOS RoHS : Not Compliant | 10,515 | |||
TLE2074INE4 | Texas Instruments | Operational Amplifier, 4 Func, 9000uV Offset-Max, BIFET, PDIP14 RoHS : Compliant | 9,661 | |||
TLE2074MFK | Texas Instruments | Operational Amplifier, 4 Func, 10500uV Offset-Max, BIFET, CQCC20 | 9,170 | |||
| 207444-8 | TE Connectivity | Rack and Panel Connector, 18 Contact(s), Male, Solder Terminal, Receptacle RoHS : Compliant | 8,277 | |||
TPS92074D | Texas Instruments | LED Driver, 2-Segment, Hybrid, PDSO8 RoHS : Compliant | 8,249 | |||
| MAX20745EPL+T | Analog Devices Inc | Switching Regulator, Current-mode, 50A, 900kHz Switching Freq-Max RoHS : Compliant | 7,591 | |||
| TLE2074ACDWR | Texas Instruments | Operational Amplifier, 4 Func, 5100uV Offset-Max, BIFET, PDSO16 RoHS : Not Compliant | 7,066 | |||
| MPD20748W | Texas Instruments | 6,883 | ||||
| 5962-01-320-7467 | Texas Instruments | Bus Driver, 2-Func, 4-Bit, True Output, TTL, PDIP20 RoHS : Not Compliant | 6,193 | |||
| MAX20743EPL+S | Analog Devices Inc | Switching Regulator RoHS : Compliant | 5,475 | |||
| MAX20743EPL+T | Analog Devices Inc | Switching Regulator, Current-mode, 60A, 900kHz Switching Freq-Max RoHS : Compliant | 5,175 | |||
TLE2074AMWB | Texas Instruments | Operational Amplifier, 4 Func, 8500uV Offset-Max, BIFET, CDFP14 RoHS : Not Compliant | 4,831 | |||
| TLE2074AIDWR | Texas Instruments | Operational Amplifier, 4 Func, 7000uV Offset-Max, BIFET, PDSO16 RoHS : Not Compliant | 3,698 | |||
| TLE2074AIDWG4 | Texas Instruments | Operational Amplifier, 4 Func, 7000uV Offset-Max, BIFET, PDSO16 RoHS : Compliant | 3,385 | |||
 Waytek, Inc. | C2074 | Heyco | Heyco C2074 liquid-tight hole plug is a sealing panel plug sized for a 1.093" opening to close unused liquid-tight conduit entry holes. Its sealing design supports secure retention, moisture resistance, and cleaner enclosure protection in electrical and equipment applications. RoHS : Compliant |
| 1,965 | |
| 0332207402 | The Bosch Group | Micro Relay, Change Over, SPDT 5-Pin, 24VDC, 10 NO, 5 NC |
| 56 | ||
 Win Source Electronics | TLE2074ACDW | Texas Instruments | IC OPAMP JFET 4 CIRCUIT 16SOIC RoHS : Compliant |
| 12,800 | |
| TLE2074ACDWR | Texas Instruments | EXCALIBUR LOW-NOISE HIGH-SPEED JFET-INPUT OPERATIONAL AMPLIFIERS RoHS : Not Compliant |
| 11,660 |
| ALLDATASHEET vous a-t-il été utile ? [ DONATE ] |
À propos de Alldatasheet | Publicité | Contactez-nous | Politique de confidentialité | Lien vers la fiche technique | Echange de liens | Fabricants All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
French ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand