| Moteur de recherche de fiches techniques de composants électroniques |
|
170L-AE2-R revendeur |
| revendeur | No de pièce | Fabricant | Description | Price | Qty. BuyNow | |
![]() TME | DEA202170LT-5076A1 | TDK Corporation | DEA202170LT-5076A1 |
| 144,000 | |
| 89006-170LF | Amphenol Corporation | Connector: DIN 41612; plug; data; Press-Fit; Plating: gold-plated |
| 1,392 | ||
| 170L9609 | Eaton Corporation | Fuse: fuse |
| 26 | ||
| 170L8926 | Eaton Corporation | Fuse: fuse; 400A |
| 2 | ||
| CS121WF170LT4E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 170mΩ; SMD; 2512; 1W; ±1%; CS; -55÷155°C |
| 0 | ||
| ARC6-08-17.0-LU-LD-2-1 | Samtec Inc | Cable; PIN: 26; 431.8mm; PVC; blue; gold-plated; 34AWG; 100Ω; 17" RoHS : Compliant |
| 0 | ||
| ARC6-16-17.0-LU-LD-2-1 | Samtec Inc | Cable; PIN: 50; 431.8mm; PVC; blue; gold-plated; 34AWG; 100Ω; 17" RoHS : Compliant |
| 0 | ||
| ARC6-16-17.0-LU-LU-3-1 | Samtec Inc | Cable; PIN: 50; 431.8mm; PVC; blue; gold-plated; 34AWG; 100Ω; 17" RoHS : Compliant |
| 0 | ||
| CS06S3F170LT5E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 170mΩ; SMD; 1206; 330mW; ±1%; CS; -55÷155°C |
| 0 | ||
| ARC6-08-17.0-LU-LU-3-1 | Samtec Inc | Cable; PIN: 26; 431.8mm; PVC; blue; gold-plated; 34AWG; 100Ω; 17" RoHS : Compliant |
| 0 | ||
NFZ5BBW170LN10L![]() | Murata Manufacturing Co Ltd | Ferrite: bead; Imp.@ 100MHz: 17Ω; SMD; 1.23A; 2020; R: 42mΩ; ±30% RoHS : Compliant |
| 0 | ||
| 52123170LF | Lapp Group | Stopper; M63; 1.5; IP68; brass; nickel; SKINDICHT®; with O-ring |
| 0 | ||
| ARC6-24-17.0-LU-LU-3-1 | Samtec Inc | Cable; PIN: 74; 431.8mm; PVC; blue; gold-plated; 34AWG; 100Ω; 17" RoHS : Compliant |
| 0 | ||
| CS06W3F170LT5E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 170mΩ; SMD; 1206; 330mW; ±1%; CS; -55÷155°C |
| 0 | ||
| SK2S200-170L | SMC Diode Solutions | Module: diode; double independent; 170V; If: 100Ax2; SOT227; screw |
| 0 | ||
![]() Avnet Americas | MMBF170LT1G![]() | onsemi | Power MOSFET, N Channel, 60 Vdc, 500 mA, 5 Ohm, SOT-23, 3 Pins, Surface Mount - Tape and Reel (Alt: MMBF170LT1G) RoHS : Compliant |
| 285,000 | |
MMBF170LT1G![]() | onsemi | - Product that comes on tape, but is not reeled (Alt: 88H4781) RoHS : Compliant |
| 0 | ||
| ZW-04-08-S-D-248-170-LL | Samtec Inc | - Bulk (Alt: ZW-04-08-S-D-248-170-LL) RoHS : Compliant |
| 0 | ||
| 170L9604 | Eaton Corporation | - Bulk (Alt: 170L9604) RoHS : Compliant |
| 0 | ||
| ARC6-16-17.0-LU-LD-2-1 | Samtec Inc | AcceleRate Slim Cable Assembly, 0.635 mm Pit - Bulk (Alt: ARC6-16-17.0-LU-LD-2-1) RoHS : Compliant |
| 0 | ||
| 170L5020 | Eaton Corporation | - Bulk (Alt: 170L5020) RoHS : Compliant |
| 0 | ||
| 170L5714 | Eaton Corporation | - Bulk (Alt: 170L5714) RoHS : Compliant |
| 0 | ||
| 170L7947 | Eaton Corporation | - Bulk (Alt: 170L7947) RoHS : Compliant |
| 0 | ||
| 170L8388 | Eaton Corporation | - Bulk (Alt: 170L8388) RoHS : Compliant |
| 0 | ||
| S1SD-15-28-GF-11.70-L1 | Samtec Inc | Cable Assembly Discrete Wire 28AWG 0.3m 30 Position Discrete Wire Housing to 30 Position Discrete W - Bulk (Alt: S1SD-15-28-GF-11.70-L1) RoHS : Compliant |
| 0 | ||
| MDM-37PH170L | ITT Interconnect Solutions | - Bulk (Alt: MDM-37PH170L) RoHS : Not Compliant |
| 0 | ||
NFZ5BBW170LZ10L![]() | Murata Manufacturing Co Ltd | - Tape and Reel (Alt: NFZ5BBW170LZ10L) RoHS : Compliant |
| 0 | ||
| ARC6-24-17.0-LU-LD-2-1 | Samtec Inc | - Bulk (Alt: ARC6-24-17.0-LU-LD-2-1) RoHS : Compliant |
| 0 | ||
| SJD12A170L01 | YAGEO Corporation | ESD Protection Device, 275 V, SOD-123S, 2 Pins, 170 V, SJD12AxxxL01 - Tape and Reel (Alt: SJD12A170L01) RoHS : Compliant |
| 0 | ||
| 170L7299 | Eaton Corporation | - Bulk (Alt: 170L7299) RoHS : Not Compliant |
| 0 | ||
![]() Newark | MMBF170LT1G![]() | onsemi | Nfet Sot23 60V 500Ma 5.0O; |Onsemi MMBF170LT1G RoHS : Compliant |
| 15,000 | |
| 180-001-170L001 | NorComp | D Sub Contact, Pin, 26-24Awg, Crimp; For Use With:Norcomp 180 Series High Density D Sub Connectors; D Sub Contact Type:Pin (Male); Contact Material:Brass; Contact Plating:Gold Plated Contacts; Wire Size Awg Max:24Awg Rohs Compliant: Yes RoHS : Compliant |
| 10,000 | ||
| 170-202-170L003 | NorComp | D Sub Contact, Socket, 20-26Awg, Crimp; |Norcomp 170-202-170L003 RoHS : Compliant |
| 9,389 | ||
| 170-002-170L001 | NorComp | D Sub Contact, Socket, 28-24Awg, Crimp; |Norcomp 170-002-170L001 RoHS : Compliant |
| 4,563 | ||
MMBF170LT1G![]() | onsemi | Mosfet, N, 60V, Sot-23; |Onsemi MMBF170LT1G RoHS : Compliant |
| 2,889 | ||
MMBF170LT1G![]() | onsemi | Mosfet, N, 60V, Sot-23; |Onsemi MMBF170LT1G RoHS : Compliant |
| 2,889 | ||
| 170-101-170L001 | NorComp | Contact, Crimp, Plug, 28-24Awg; |Norcomp 170-101-170L001 RoHS : Compliant |
| 797 | ||
| 180-102-170L001 | NorComp | Contact, Crimp, Receptacle, 26-24Awg; |Norcomp 180-102-170L001 RoHS : Compliant |
| 531 | ||
| ZW-04-08-S-D-248-170-LL | Samtec Inc | Conn Stack Brd, 2.54Mm, 8Pos, Hdr; |Samtec, Inc. ZW-04-08-S-D-248-170-LL RoHS : Compliant |
| 432 | ||
| ZW-02-19-S-D-920-170-LL | Samtec Inc | Conn Stack Brd, 2.54Mm, 4Pos, Hdr; |Samtec, Inc. ZW-02-19-S-D-920-170-LL RoHS : Compliant |
| 270 | ||
| DW-03-14-T-S-1170-LL | Samtec Inc | Conn Stack Brd, 2.54Mm, 3Pos, Hdr; |Samtec, Inc. DW-03-14-T-S-1170-LL RoHS : Compliant |
| 250 | ||
| ZW-18-09-S-D-250-170-LL | Samtec Inc | Conn Stack Brd, 2.54Mm, 36Pos, Hdr; |Samtec, Inc. ZW-18-09-S-D-250-170-LL RoHS : Compliant |
| 227 | ||
| ZW-15-09-S-S-250-170-LL | Samtec Inc | Conn Stack Brd, 2.54Mm, 15Pos, Hdr; |Samtec, Inc. ZW-15-09-S-S-250-170-LL RoHS : Compliant |
| 137 | ||
| 180-202-170L002 | NorComp | D-Sub Contact, Socket, 20-26Awg, Crimp; |Norcomp 180-202-170L002 RoHS : Compliant |
| 7 | ||
| 170-102-170L002 | NorComp | D Sub Contact, Socket, 28-24Awg, Crimp; For Use With:Norcomp 170 Series D Sub Housing Connectors; D Sub Contact Type:Socket (Female); Contact Material:Phosphor Bronze; Contact Plating:Gold Plated Contacts; Wire Size Awg Max:24Awg Rohs Compliant: Yes RoHS : Compliant |
| 4 | ||
![]() RS | 170L9604 | Eaton Bussmann | FUSE 700A 660V 3STN/110 AR |
| 0 | |
| 170L5020 | Eaton Bussmann | FUSE 250A 660V 1*STN/110 AR |
| 0 | ||
| 170L5714 | Eaton Bussmann | FUSE 400A 1000V 1S/110 AR |
| 0 | ||
| 170L7947 | Eaton Bussmann | FUSE 800A 1000V 3BTN/80 AR |
| 0 | ||
| 170L8388 | Eaton Bussmann | FUSE 400A 1000V 2STN/110 AR |
| 0 | ||
| 3TC52170LJ8 | Siemens | CONTACTOR SIZE 8 2-POLE ;3TC52170LJ8 |
| 0 | ||
| 3TC56170LF4 | Siemens | CONTACTOR, DC OPER, SIZE 12,110V,2NO+2NC ;3TC56170LF4 |
| 0 | ||
| MY1B20G-170L | SMC Corporation of America | CYLINDER, RODLESS, MECH JOINT, SLIDE TABLE, MY1 SERIES |
| 0 | ||
| MCS13170L120 | POBCO Inc | MOUNTING CHANNEL GALVANIZED INDIN CHANNEL, 1.18IN WIDE, .94IN HEIGHT,10FT LENGTH |
| 0 | ||
| 7731380170LF | Amphenol FCi | BERGSTIK |
| 0 | ||
| MY2H16G-170L-A93Z | SMC Corporation of America | CYLINDER, RODLESS, MECH JOINT, SLIDE TABLE, MY2 SERIES |
| 0 | ||
| MY1H25-170LZ-M9BL-XC56 | SMC Corporation of America | CYLINDER, RODLESS, MY1 SERIES |
| 0 | ||
| MY1H16G-170L-M9BWL-XC56 | SMC Corporation of America | CYLINDER, RODLESS, SLIDE TABLE, MY1 SERIES |
| 0 | ||
| LTGNO501-TB-B-A/6V (4LT-20824170|LTGNO501-TB-B-A/6V|LTGNO501TBBA/6V) | Carling Technologies | SWITCH;ROCKER;TG/LTG SERIES |
| 0 | ||
| LTIGM5M-6S-BL-RC/AM-NBL/6V (TGL-53735170|LTIGM5M-6S-BL-RC/AM-NBL/6V|LTIGM5M6SBLR | Carling Technologies | ROCKER SWITCH, FULL SIZED, TIPPETTE SERIES |
| 0 | ||
![]() Bisco Industries | 170-201-170L002 | MISC. INDUSTRIAL CONNECTORS | 4 | |||
| 8831E-080-170L-F | MISC. INDUSTRIAL CONNECTORS | 3 | ||||
![]() Rochester Electronics | MMBF170LT3G![]() | onsemi | MOSFET N-Channel 60V 500mA SOT-23-3 T/R RoHS : Compliant |
| 3,493 | |
| APS12170LUAATN | Allegro MicroSystems LLC | Solid State Magnetic Sensor Latch Hall Effect 3-SIP Bulk RoHS : Compliant |
| 4,000 | ||
![]() Sager | ZW-04-08-S-D-248-170-LL | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header, 0.100 Pitch RoHS : Compliant |
| 432 | |
| 170L3776 | Eaton Bussmann | Specialty Fuses 10A 1kV 00TN/110 AR | 0 | |||
| 170L4955 | Eaton Bussmann | Specialty Fuses FUSE 250A 660V 1*BTN/50 AR | 0 | |||
| 170L5189 | Eaton Bussmann | Specialty Fuses FUSE 450A 660V 1/80 AR | 0 | |||
| 170L5558 | Eaton Bussmann | Specialty Fuses 450A 660V 1BKN/50 AR (OBS CAM A 170M3470 | 0 | |||
| 170L9581 | Eaton Bussmann | Specialty Fuses FUSE 725A 1000V 3BKN/75 AR | 0 | |||
| S1SS-05-28-GF-21.70-L1 | Samtec Inc | MICRO MATE�Ѣ SINGLE ROW DISCRETE WIRE CABLE ASSEMBLY, 1.00 MM PITCH RoHS : Compliant |
| 0 | ||
| 6126V2A170L.5 | TT electronics / BI Technologies | Industrial Motion & Position Sensors |
| 0 | ||
| 6126V3A170L.5FS | TT electronics / BI Technologies | Industrial Motion & Position Sensors |
| 0 | ||
| 6121V3A170L.5FS | TT electronics / BI Technologies | Industrial Motion & Position Sensors |
| 0 | ||
| 6126V2A170L.5FS | TT electronics / BI Technologies | Industrial Motion & Position Sensors |
| 0 | ||
| 6127V5A170L.5SL | TT electronics / BI Technologies | Industrial Motion & Position Sensors |
| 0 | ||
| 6121V0A170L.5SL | TT electronics / BI Technologies | Industrial Motion & Position Sensors |
| 0 | ||
| 6121V3A170L.5CW | TT electronics / BI Technologies | Industrial Motion & Position Sensors |
| 0 | ||
| 6126V2A170L.5CW | TT electronics / BI Technologies | Industrial Motion & Position Sensors |
| 0 | ||
![]() Ameya Holding Limited | MMBF170LT1G![]() | onsemi | Single N-Channel 60 V 225 mW Silicon Surface Mount Mosfet - SOT-23 RoHS : Compliant | 16,406 | ||
![]() ComSIT USA | MMBF170LT1G![]() | onsemi | N-channel MOSFET, 60V, 0.6A, RDS(on) 1.2?, SOT-23 package. RoHS : Compliant | 77 | ||
![]() Interstate Connecting Components | 180-101-170L001 | NorComp | RoHS : Compliant |
| 981 | |
| 170-102-170L001 | NorComp | RoHS : Compliant |
| 263 | ||
| 170-201-170L003 | NorComp | RoHS : Compliant |
| 229 | ||
| HVSL1000082A170L2000 | Amphenol PCD | HVSL SERIES CODING A 2POS WITH INTERLOCK | 0 | |||
| MDM-37PH170L | ITT Interconnect Solutions | MDM-37PH170L | 0 | |||
| 85854-170LF | Amphenol FCi | 85854-170LF-METRAL HDR 5RX4M P RoHS : Compliant | 0 | |||
| 89006-170LF | Amphenol FCi | 89006-170LF-METRAL HDR 1MX5R P RoHS : Compliant | 0 | |||
| HVSL1200082A170L2000 | Amphenol PCD | HVSL SERIES CODING A 2POS WITH INTERLOCK | 0 | |||
| 74744-170LF | Amphenol FCi | 74744-170LF-METRAL HDR 5RX8M S RoHS : Compliant | 0 | |||
![]() PEI Genesis | MDM-37PH170L | ITT Interconnect Solutions |
| 0 | ||
![]() Powell Electronics | 89006-170LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 919 | |
| ZW-04-08-S-D-248-170-LL | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 285 | ||
| ZW-02-19-S-D-920-170-LL | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 178 | ||
| DW-03-14-T-S-1170-LL | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 165 | ||
| ZW-03-19-S-D-920-170-LL | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 158 | ||
| ZW-18-09-S-D-250-170-LL | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 150 | ||
| ZW-15-09-S-S-250-170-LL | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 90 | ||
| ZW-15-15-S-S-240-170-LL | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 90 | ||
| ZW-19-09-S-S-250-170-LL | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 70 | ||
| HW-26-12-G-D-650-170-LL | Samtec Inc | High-Reliability Tiger Eye Socket Strips RoHS : Compliant |
| 33 | ||
![]() Chip 1 Exchange | MTS170LQ-BO | INSTOCK | 1,649 | |||
MMBF170LT1G![]() | onsemi | INSTOCK RoHS : Compliant | 1,514 | |||
| 180-001-170L001 | NorComp | INSTOCK RoHS : Compliant | 950 | |||
| 180-001-170L001 | INSTOCK | 110 | ||||
| BV 039-5317.0 L | INSTOCK | 50 | ||||
![]() Avnet Abacus | HFB-170L | YAGEO Corporation | (Alt: HFB-170L) RoHS : Compliant | 0 | ||
| HFC-170L | YAGEO Corporation | (Alt: HFC-170L) RoHS : Compliant | 0 | |||
| HFD-170L | YAGEO Corporation | (Alt: HFD-170L) RoHS : Compliant | 0 | |||
| HFA-170L | YAGEO Corporation | (Alt: HFA-170L) RoHS : Compliant | 0 | |||
| 89006-170LF | Amphenol Corporation | (Alt: 89006-170LF) RoHS : Compliant | 0 | |||
| SJD12A170L01 | YAGEO Corporation | ESD Protection Device 275 V SOD123S 2 Pins 170 V SJD12AxxxL01 (Alt: SJD12A170L01) RoHS : Compliant | 0 | |||
| SJD12C170L01 | YAGEO Corporation | ESD Protection Device 275 V SOD123S 2 Pins 170 V SJD12CxxxL01 (Alt: SJD12C170L01) RoHS : Compliant | 0 | |||
| 77313-101-70LF | Amphenol Corporation | Conn Unshrouded Header HDR 70 POS 254mm Solder ST ThruHole Poly Bag (Alt: 77313-101-70LF) RoHS : Compliant | 0 | |||
NFZ5BBW170LZ10L![]() | Murata Manufacturing Co Ltd | Ferrite Chip Bead 170 17Ohm 25A 2Pin 2020 Emboss TR (Alt: NFZ5BBW170LZ10L) RoHS : Compliant | 0 | |||
NFZ5BBW170LN10L![]() | Murata Manufacturing Co Ltd | Ferrite Chip Bead 170 17Ohm 25A 2Pin 2020 Emboss TR (Alt: NFZ5BBW170LN10L) RoHS : Compliant | 0 | |||
| DEA162170LT-5039A5 | TDK Corporation | Multilayer Low Pass Filter 14279MHz to 2170MHz 4Pin 0603 (Alt: DEA162170LT-5039A5) RoHS : Compliant | 0 | |||
![]() Avnet Asia | MMBF170LT1G![]() | onsemi | Power MOSFET, N Channel, 60 Vdc, 500 mA, 5 Ohm, SOT-23, 3 Pins, Surface Mount (Alt: MMBF170LT1G) RoHS : Compliant | 0 | ||
| RBC290A170L2GWT-800#YJ1 | Renesas Electronics Corporation | (Alt: RBC290A170L2GWT-800#YJ1) RoHS : Not Compliant | 0 | |||
![]() Avnet Silica | MMBF170LT1G![]() | onsemi | Power MOSFET N Channel 60 V 500 mA 5 ohm SOT23 Surface Mount (Alt: MMBF170LT1G) RoHS : Compliant | 0 | ||
| F17170_LINNEA-GC2-Z2T25 | LEDIL | Linear lensrectang24 Pos2833 x 430m (Alt: F17170_LINNEA-GC2-Z2T25) RoHS : Compliant | 0 | |||
| 2J7A83BA-170LL195-C91GRST_CU0226 | 2J USA | 2J7A83Ba Black Screw Mount 5G1 170cm LL195 SMAMaleGold Red Shrink Tube 5G2 170cm LL195 (Alt: SI311102333) RoHS : Compliant | 0 | |||
| 2J7A83BC-170LL195-C91GRST_300LL195 | 2J USA | 2J7A83Bc Black Screw Mount 5G1 170cm LL195 SMAMaleGold Red Shrink Tube 5G2 170cm LL195 (Alt: SI311102335) RoHS : Compliant | 0 | |||
| 2J7A83BC-170LL195-C91GRST_190LL195_CU | 2J USA | 2J7A83Bc Black Screw Mount 5G1 170cm LL195 SMAMaleGold Red Shrink Tube 5G2 170cm LL195 (Alt: SI311104769) RoHS : Compliant | 0 | |||
| 2J7A83BB-170LL195-C91GRST_C91GRST_190 | 2J USA | 2J7A83Bb Black Screw Mount 5G1 170cm LL195 SMAMaleGold Red Shrink Tube 5G2 170cm LL195 (Alt: SI311104360) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | MMBF170LT1![]() | onsemi | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2,880 | |
MMBF170LT1G![]() | onsemi | IN STOCK SHIP TODAY RoHS : Compliant |
| 65 | ||
![]() EBV Elektronik | MMBF170LT1G![]() | onsemi | Power MOSFET N Channel 60 V 500 mA 5 ohm SOT23 Surface Mount (Alt: MMBF170LT1G) RoHS : Compliant | 0 | ||
![]() FDH Electronics | 170-101-170L002 | INTERSTATE CONNECTING COMPONENTS | Contacts | 210 | ||
| 170-102-170L002 | MOUSER | Contacts | 41 | |||
| 180-102170L001 | NorComp | Contacts |
| 40 | ||
| 170-201-170L002 | NorComp | Miscellaneous RoHS : Compliant | 33 | |||
| 170-202-170L002 | Digi International Inc | Contacts | 33 | |||
![]() Maritex | MMBF170LT1G![]() | onsemi | MOSFETs; MMBF170LT1G; ON SEMICONDUCTOR; 60 V; 500 mA; 20 V; 225 mW RoHS : Compliant |
| 20,175 | |
| MMBF170LT1G | VBsemi Electronics Co Ltd | Transistor: N-MOSFET; unipolar; 60V; 250mA; 3.3ohm;0.3W; -55+150 st.C; SMD; SOT23 |
| 99 | ||
![]() Master Electronics | MMBF170LT1G![]() | onsemi | Single N-Channel Power MOSFET 60V 500mA 5Ω RoHS : Compliant |
| 63,000 | |
| S1SS-05-28-GF-21.70-L1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTLW-106-05-G-S-170-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| SPDA17806/2170LAR | Pulse Electronics Corporation | External/In-Building Antenna: Stick/ Blades Connector Mount RoHS : Compliant |
| 0 | ||
| MTSW-101-08-S-D-170-LA | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ZW-04-08-S-D-248-170-LL | Samtec Inc | FLEXIBLE BOARD STACKING H RoHS : Compliant |
| 0 | ||
| ARC6-16-17.0-LU-LD-2-1 | Samtec Inc | AcceleRate Slim Cable Assembly 0.635 mm Pitch RoHS : Compliant |
| 0 | ||
| S1SD-15-28-GF-11.70-L1 | Samtec Inc | MICRO MATE DOUBLE ROW DI RoHS : Compliant |
| 0 | ||
| MDM-37PH170L | ITT Interconnect Solutions | Cable Assembly Coaxial 26AWG 37 POS D-Sub PIN Crimp RoHS : Not Compliant |
| 0 | ||
| ARC6-24-17.0-LU-LD-2-1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| SGE24501170L01000C010 | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| ZW-27-09-T-S-395-170-LL | Samtec Inc | Conn Board Stacker HDR 27 POS 2.54mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| MTSW-105-24-S-S-170-LA | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTSW-112-22-T-D-170-LA | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| SGE22521170L01850C | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE34170LF | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50. BNC Male to BNC Male Cable Using RG401 Coax, RoHS. PE34170LF is a BNC male to BNC male cable using RG401 coax. This Pasternack BNC male to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE34170LF BNC male to BNC male cable assembly is constructed with RG401 coax. | 951 | ||
| PE34170LF-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm, Length: 6 inches. BNC Male to BNC Male Cable 6 Inch Length Using RG401 Coax, RoHS., Radio frequency assembly BNC male to BNC male cable 6 inch length using RG401 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 6 inch length using RG401 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE34170LF-6, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE34170LF-6 is built with RG401 which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 6 inch length using RG401 coax, RoHS. |
| 372 | ||
| PE34170LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm, Length: 36 inches. BNC Male to BNC Male Cable 36 Inch Length Using RG401 Coax, RoHS., Radio frequency assembly BNC male to BNC male cable 36 inch length using RG401 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 36 inch length using RG401 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE34170LF-36, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE34170LF-36 is built with RG401 which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 36 inch length using RG401 coax, RoHS. |
| 66 | ||
| PE34170LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm, Length: 48 inches. BNC Male to BNC Male Cable 48 Inch Length Using RG401 Coax, RoHS., Radio frequency assembly BNC male to BNC male cable 48 inch length using RG401 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 48 inch length using RG401 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE34170LF-48, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE34170LF-48 is built with RG401 which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 48 inch length using RG401 coax, RoHS. |
| 49 | ||
| PE34170LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm, Length: 60 inches. BNC Male to BNC Male Cable 60 Inch Length Using RG401 Coax, RoHS., Radio frequency assembly BNC male to BNC male cable 60 inch length using RG401 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 60 inch length using RG401 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE34170LF-60, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE34170LF-60 is built with RG401 which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 60 inch length using RG401 coax, RoHS. |
| 35 | ||
| PE36170LF-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG217/U, RF Cable Type: RG217, RF Cable Impedance: 50 Ohm, Length: 24 inches. N Male to 7/16 DIN Male Cable 24 Inch Length Using RG217 Coax, LF Solder., Radio frequency assembly N male to 7/16 DIN male cable 24 inch length using RG217 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to 7/16 DIN male cable 24 inch length using RG217 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and 7/16 DIN cable connection on the other. Our type N to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This type N to 7/16 DIN cable is a male to male coax assembly, PE36170LF-24, can also be known as a N type plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. Type N plug to 7/16 DIN plug cable assembly PE36170LF-24 is built with RG217 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36170LF-24 can also be used in the other direction and will be 7/16 DIN male to N type male cable assembly if the opposite connectivity is required. N type plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to 7/16 DIN male cable 24 inch length using RG217 coax, LF solder. |
| 0 | ||
| PE3W08170LF | Pasternack Enterprises | Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. HN Male Right Angle to 7/16 DIN Male Cable Using RG214 Coax, LF Solder. PE3W08170LF is a HN male right angle to 7/16 DIN male cable using RG214 coax. This Pasternack HN male right angle to 7/16 DIN male cable assembly uses a 50 Ohm HN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. HN right angle to 7/16 DIN coaxial cable assembly uses 90 degree right angle coax cable connector. Our male HN right angle to male 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08170LF HN male right angle to 7/16 DIN male cable assembly is constructed with RG214 coax. | 0 | |||
| PE36170LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG217/U, RF Cable Type: RG217, RF Cable Impedance: 50. N Male to 7/16 DIN Male Cable Using RG217 Coax, RoHS. PE36170LF is a type N male to 7/16 DIN male cable using RG217 coax. This Pasternack type N male to 7/16 DIN male cable assembly uses a 50 Ohm type N for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male N type to male 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE36170LF type N male to 7/16 DIN male cable assembly is constructed with RG217 coax. | 0 | |||
| PE3C3170LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. N Female Bulkhead to MCX Plug Cable Using RG223 Coax with HeatShrink, RoHS. PE3C3170LF/HS is a N female bulkhead to MCX plug cable using RG223 coax. This Pasternack N female bulkhead to MCX plug cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm MCX for connector 2. Our female N bulkhead to plug MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3170LF/HS N female bulkhead to MCX plug cable assembly is constructed with RG223 coax. | 0 | |||
| PE3170LF-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: GR874, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to GR874 Sexless Cable 12 Inch Length Using RG223 Coax, RoHS., Radio frequency assembly N male to GR874 sexless cable 12 inch length using RG223 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to GR874 sexless cable 12 inch length using RG223 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to GR874 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and GR874 cable connection on the other. Our N type to GR874 cable assemblies have a male gender on end 1 and sexless on end 2. This N type to GR874 cable is a male to sexless coax assembly, PE3170LF-12, can also be known as a type N plug to GR874 sexless cable assembly and will be shipped same-day as it is purchased. Type N plug to GR874 sexless cable assembly PE3170LF-12 is built with RG223 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to GR874 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to GR874 sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3170LF-12 can also be used in the other direction and will be GR874 sexless to type N male cable assembly if the opposite connectivity is required. Type N plug to GR874 sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to GR874 cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to GR874 sexless cable 12 inch length using RG223 coax, RoHS. |
| 0 | ||
| PE36170LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG217/U, RF Cable Type: RG217, RF Cable Impedance: 50 Ohm, Length: 60 inches. N Male to 7/16 DIN Male Cable 60 Inch Length Using RG217 Coax, LF Solder., Radio frequency assembly N male to 7/16 DIN male cable 60 inch length using RG217 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to 7/16 DIN male cable 60 inch length using RG217 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and 7/16 DIN cable connection on the other. Our N type to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This type N to 7/16 DIN cable is a male to male coax assembly, PE36170LF-60, can also be known as a type N plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. N type plug to 7/16 DIN plug cable assembly PE36170LF-60 is built with RG217 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this N type male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36170LF-60 can also be used in the other direction and will be 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Type N plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to 7/16 DIN male cable 60 inch length using RG217 coax, LF solder. |
| 0 | ||
| PE3W19170LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: LMR-400-75, RF Cable Type: LMR-400-75, RF Cable Impedance: 75 Ohm. 75 Ohm N Male to 75 Ohm N Male Cable Using 75 Ohm LMR-400-75 Coax, LF Solder. PE3W19170LF is a N male to N male cable using LMR-400-75 coax. This Pasternack N male to N male cable assembly uses a 75 Ohm N for connector 1 and a 75 Ohm N for connector 2. Our male N to male N cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W19170LF N male to N male cable assembly is constructed with LMR-400-75 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C0170LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to N Male Right Angle Cable Using LMR-195 Coax with HeatShrink, LF Solder, RoHS. PE3C0170LF/HS is a SMA male right angle to N male right angle cable using LMR-195 coax. This Pasternack SMA male right angle to N male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. SMA right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0170LF/HS SMA male right angle to N male right angle cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3170LF-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: GR874, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 72 inches. N Male to GR874 Sexless Cable 72 Inch Length Using RG223 Coax, RoHS., Radio frequency assembly N male to GR874 sexless cable 72 inch length using RG223 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to GR874 sexless cable 72 inch length using RG223 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to GR874 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and GR874 cable connection on the other. Our type N to GR874 cable assemblies have a male gender on end 1 and sexless on end 2. This N type to GR874 cable is a male to sexless coax assembly, PE3170LF-72, can also be known as a type N plug to GR874 sexless cable assembly and will be shipped same-day as it is purchased. Type N plug to GR874 sexless cable assembly PE3170LF-72 is built with RG223 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to GR874 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to GR874 sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3170LF-72 can also be used in the other direction and will be GR874 sexless to type N male cable assembly if the opposite connectivity is required. Type N plug to GR874 sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to GR874 cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to GR874 sexless cable 72 inch length using RG223 coax, RoHS. |
| 0 | ||
| PE3W11170LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047AL, RF Cable Type: PE-SR047AL, RF Cable Impedance: 50 Ohm. | 0 | |||
![]() Relay Specialties | CVF170L5 | BlockMaster Blocks | PCB Terminal Block; 17-pos 5.08mm; Plug; Vertical; 15A 300V; 30-12AWG; L-Stack; Green |
| 200 | |
![]() Vyrian | MMBF170LT3G![]() | onsemi | Small Signal Field-Effect Transistor, 0.5A I(D), 60V, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-236AB RoHS : Compliant | 11,312 | ||
M27C1001-70L1![]() | STMicroelectronics | RoHS : Compliant | 9,233 | |||
M27C1001-70L1TR![]() | STMicroelectronics | RoHS : Not Compliant | 8,784 | |||
M27C4001-70L6![]() | STMicroelectronics | RoHS : Not Compliant | 8,102 | |||
PSD501B1-70L![]() | STMicroelectronics | 7,562 | ||||
| ADC12C170LFEB-NOPB | Texas Instruments | 6,412 | ||||
M27C2001-70L1![]() | STMicroelectronics | RoHS : Compliant | 5,212 | |||
PSD503B1-70L![]() | STMicroelectronics | 5,123 | ||||
ZPSD503B1-70L![]() | STMicroelectronics | 5,020 | ||||
PSD511B1-70L![]() | STMicroelectronics | 4,995 | ||||
| PSD301-70L | STMicroelectronics | 4,989 | ||||
| ZPSD513B1-70L | STMicroelectronics | 4,068 | ||||
M27C4001-70L1TR![]() | STMicroelectronics | RoHS : Not Compliant | 3,826 | |||
M27C1001-70L6X![]() | STMicroelectronics | RoHS : Compliant | 3,759 | |||
PSD513B1-70L![]() | STMicroelectronics | 3,369 | ||||
![]() Win Source Electronics | MMBF170LT1G![]() | onsemi | Trans MOSFET N-CH 60V 0.5A 3-Pin SOT-23 T/R / MOSFET N-CH 60V 500MA SOT-23 RoHS : Compliant |
| 132,000 | |
| MMBF170LT | onsemi | N-Channel MOSFET 60V 500mA SOT-23 |
| 132,000 | ||
MMBF170LT1![]() | onsemi | MOSFET N-CH 60V 500MA SOT-23 / TMOS FET Transistor RoHS : Not Compliant |
| 125,710 | ||
MMBF170LT3G![]() | onsemi | MOSFET N-CH 60V 500MA SOT-23 RoHS : Compliant |
| 122,450 | ||
MMBF170LT3![]() | onsemi | MOSFET N-CH 60V 500MA SOT-23 RoHS : Not Compliant |
| 120,970 |
| ALLDATASHEET vous a-t-il été utile ? [ DONATE ] |
À propos de Alldatasheet | Publicité | Contactez-nous | Politique de confidentialité | Lien vers la fiche technique | Echange de liens | Fabricants All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |