 |
Moteur de recherche de fiches techniques de composants électroniques |
|
|
Moteur de recherche de fiches techniques de composants électroniques |
|
153B1-R2 revendeur |
| revendeur | No de pièce | Fabricant | Description | Price | Qty. BuyNow | |
 ECCO | 097-0153-000 | ITT Interconnect Solutions |
| 423 | ||
| 0190700153 | Molex | RoHS : Compliant |
| 25 | ||
| 19070-0153 | Molex | RoHS : Compliant |
| 25 | ||
 Pasternack Enterprises US | PE3W21531-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMB Plug Right Angle to TNC Male Low Loss Cable 60 Inch Length Using LMR-195-UF Coax., Pasternack’s PE3W21531-60 low loss right angle SMB plug to TNC male RF cable assembly using LMR-195-UF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB plug to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMB to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMB cable connection on one end and a TNC cable connection on the other. Our SMB to TNC cable assembly has a plug gender on end 1 and a male on end 2. PE3W21531-60 can also be known as a low loss right angle SMB male to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W21531-60 RF cable has a tpe jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Our right angle SMB plug to TNC male cable has a maximum VSWR of 1.4:1. This PE3W21531-60 SMB male to TNC plug cable assembly is built with LMR-195-UF, which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with right angle SMB to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this 60-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3W21531-60 can also be used in the other direction and will be a TNC male to right angle SMB plug cable assembly if the opposite connectivity is required. This low loss SMB right angle male to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMB to TNC cable assembly for quick shipment worldwide. Variations of SMB and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB to TNC low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 2,729 | |
| PE34153 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50. SMA Male to N Female Bulkhead Cable Using PE-SR047FL Coax. PE34153 is a SMA male to type N female bulkhead cable using PE-SR047FL coax. This Pasternack SMA male to type N female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N type for connector 2. Our male SMA to female N type bulkhead cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE34153 SMA male to type N female bulkhead cable assembly is constructed with PE-SR047FL coax. | 924 | |||
| PE33615-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8A/U, RF Cable Type: RG8, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to TNC Male Cable 36 Inch Length Using RG8 Coax., Radio frequency assembly N male to TNC male cable 36 inch length using RG8 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to TNC male cable 36 inch length using RG8 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and TNC cable connection on the other. Our type N to TNC cable assemblies have a male gender on end 1 and male on end 2. This type N to TNC cable is a male to male coax assembly, PE33615-36, can also be known as a type N plug to TNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to TNC plug cable assembly PE33615-36 is built with RG8 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this N type male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33615-36 can also be used in the other direction and will be TNC male to type N male cable assembly if the opposite connectivity is required. N type plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male cable 36 inch length using RG8 coax. |
| 668 | ||
| PE3FCA153-10M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Dual SC UPC to ST UPC, MM OM3, 2.0mm LSZH, Aqua-10M. Pasternack’s PE3FCA153-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long duplex cable assembly is equipped with SC/UPC to ST/UPC connectors. Our aqua blue fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. As an OM3 fiber optic jumper, Pasternack’s PE3FCA153-10M is optimized for high-speed, high-bandwidth data transfer, supporting faster, longer-distance connectivity compared to OM1 fiber.The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA153-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA153-10M fiber optic cable with a 2 mm cable diameter and 15 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of dual SC/UPC to dual ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. |
| 143 | ||
| PE3FCA153-5M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Dual SC UPC to ST UPC, MM OM3, 2.0mm LSZH, Aqua-5M. Pasternack’s PE3FCA153-5M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 5-meter long duplex cable assembly is equipped with SC/UPC to ST/UPC connectors. Our aqua blue fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. As an OM3 fiber optic jumper, Pasternack’s PE3FCA153-5M is optimized for high-speed, high-bandwidth data transfer, supporting faster, longer-distance connectivity compared to OM1 fiber.The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA153-5M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA153-5M fiber optic cable with a 2 mm cable diameter and 15 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of dual SC/UPC to dual ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. |
| 143 | ||
| PE34153-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male to N Female Bulkhead Cable 24 Inch Length Using PE-SR047FL Coax., Radio frequency assembly SMA male to N female bulkhead cable 24 inch length using PE-SR047FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N female bulkhead cable 24 inch length using PE-SR047FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and N type bulkhead cable connection on the other. Our SMA to type N cable assemblies have a male gender on end 1 and female on end 2. This SMA to type N cable is a male to female coax assembly, PE34153-24, can also be known as a SMA plug to N type jack cable assembly and will be shipped same-day as it is purchased. SMA plug to type N jack cable assembly PE34153-24 is built with PE-SR047FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34153-24 can also be used in the other direction and will be N type female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N female bulkhead cable 24 inch length using PE-SR047FL coax. |
| 132 | ||
| PE34153-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Male to N Female Bulkhead Cable 6 Inch Length Using PE-SR047FL Coax., Radio frequency assembly SMA male to N female bulkhead cable 6 inch length using PE-SR047FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N female bulkhead cable 6 inch length using PE-SR047FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and type N bulkhead cable connection on the other. Our SMA to type N cable assemblies have a male gender on end 1 and female on end 2. This SMA to type N cable is a male to female coax assembly, PE34153-6, can also be known as a SMA plug to N type jack cable assembly and will be shipped same-day as it is purchased. SMA plug to type N jack cable assembly PE34153-6 is built with PE-SR047FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34153-6 can also be used in the other direction and will be type N female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N female bulkhead cable 6 inch length using PE-SR047FL coax. |
| 132 | ||
| PE3W15315-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.2-5, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 2.2-5 Female to SMA Male Low PIM Cable 36 Inch Length Using TFT-5G-402 Coax with Times Microwave Components., Radio frequency assembly 2.2-5 female to SMA male low PIM cable 36 inch length using TFT-5G-402 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.2-5 female to SMA male low PIM cable 36 inch length using TFT-5G-402 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.2-5 to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 2.2-5 cable connection on one end and a SMA cable connection on the other. Our low PIM 2.2-5 to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3W15315-36 can also be known as a low PIM 2.2-5 jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3W15315-36 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 2.2-5 female to SMA male cable has a maximum VSWR of 1.4:1. 2.2-5 jack to SMA plug cable assembly PE3W15315-36 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 2.2-5 cable assembly is manufactured with 2.2-5 to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W15315-36 can also be used in the other direction and will be a SMA male to 2.2-5 female cable assembly if the opposite connectivity is required. Low PIM 2.2-5 jack to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to SMA cable assembly for quick shipment worldwide. Variations of 2.2-5 and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.2-5 to SMA low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C4153 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: Banana, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 0, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50. SMB Plug to Banana Plug Cable Using RG223 Coax. PE3C4153 is a SMB plug to Banana plug cable using RG223 coax. This Pasternack SMB plug to Banana plug cable assembly uses a 50 Ohm SMB for connector 1 and a Banana for connector 2. Our plug SMB to plug Banana cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C4153 SMB plug to Banana plug cable assembly is constructed with RG223 coax. | 0 | |||
| PE3W01539-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. MMCX Plug to BNC Male Cable 48 Inch Length Using RG174 Coax., Radio frequency assembly MMCX plug to BNC male cable 48 inch length using RG174 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug to BNC male cable 48 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with MMCX cable connection on one end and BNC cable connection on the other. Our MMCX to BNC cable assembly has plug gender on end 1 and male on end 2. PE3W01539-48 can also be known as a MMCX male to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PE dielectric type. MMCX male to BNC plug cable assembly PE3W01539-48 is built with RG174 which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with MMCX to BNC cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the crimp/solder attachment method and a brass body with gold plating, while the other has crimp/crimp attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3W01539-48 RF cable are available on our downloadable PDF datasheet.PE3W01539-48 can also be used in the other direction and will be BNC male to MMCX plug cable assembly if the opposite connectivity is required. MMCX male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to BNC cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX RF cable assembly as per your requirements. |
| 0 | ||
| PE3W15300/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to BNC Female 4 Hole Flange Cable Using RG142 Coax with HeatShrink. PE3W15300/HS is a BNC male right angle to BNC female 4 hole flange cable using RG142 coax. This Pasternack BNC male right angle to BNC female 4 hole flange cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. BNC right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to female BNC 4 hole flange cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15300/HS BNC male right angle to BNC female 4 hole flange cable assembly is constructed with RG142 coax. | 0 | |||
| PE3W15327/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to Water Blue FAKRA Jack Low Loss Cable 24 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA male right angle to water blue FAKRA jack low loss cable 24 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to water blue FAKRA jack low loss cable 24 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to FAKRA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a FAKRA cable connection on the other. Our low loss right angle SMA to FAKRA cable assembly has a male gender on end 1 and a jack on end 2. PE3W15327/HS-24 can also be known as a low loss right angle SMA plug to FAKRA female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15327/HS-24 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle SMA male to FAKRA jack cable has a maximum VSWR of 1.4:1. SMA plug to FAKRA female cable assembly PE3W15327/HS-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to FAKRA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W15327/HS-24 can also be used in the other direction and will be a FAKRA jack to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to FAKRA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to FAKRA cable assembly for quick shipment worldwide. Variations of SMA and FAKRA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to FAKRA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W15344 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8X, RF Cable Type: RG8X, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to SMA Female Cable Using RG8X Coax. PE3W15344 is a reverse polarity SMA male to SMA female cable using RG8X coax. This Pasternack reverse polarity SMA male to SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our reverse polarity male SMA to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15344 SMA reverse polarity male to SMA female cable assembly is constructed with RG8X coax. | 0 | |||
| PE3W15368LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to SMA Male Cable Using RG405 Coax, LF Solder. PE3W15368LF is a SMP female right angle to SMA male cable using RG405 coax. This Pasternack SMP female right angle to SMA male cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMA for connector 2. SMP right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMP right angle to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W15368LF SMP female right angle to SMA male cable assembly is constructed with RG405 coax. | 0 | |||
| PE3W21536 | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMPS, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. SSMA Female Bulkhead to SMPS Female Cable Using PE-047SR Tan Coax. PE3W21536 is a SSMA female bulkhead to SMPS female cable using PE-047SR coax. This Pasternack SSMA female bulkhead to SMPS female cable assembly uses a 50 Ohm SSMA for connector 1 and a 50 Ohm SMPS for connector 2. Our female SSMA bulkhead to female SMPS cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W21536 SSMA female bulkhead to SMPS female cable assembly is constructed with PE-047SR coax. | 0 | |||
 TE Connectivity | 41532 | TE Connectivity | 250 FASTON FLAG REC 18-12 AWG TPBR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 18 – 12 AWG Wire Size: .82 – 3.31 mm² Mating Tab Width: 6.35 mm Receptacle Uninsulated 18 – 12 AWG .82 – 3.31 mm² | Quick Disconnect | Part Number: 41532 | Internal Number: 41532 | TE Connectivity RoHS : Compliant |
| 375,243 | |
| 2391530-1 | TE Connectivity | SINGLE WIRE SEAL, 1.40-2.0 Connector Seal & Plug Type: Single Wire Seal (SWS) Cavity Diameter: 4.45 mm Cavity Diameter: .175 in Operating Temperature Range: -55 – 105 °C Operating Temperature Range: -67 – 221 °F Single Wire Seal (SWS) 4.45 mm | Connector Seal & Cavity Plug | Part Number: 2391530-1 | Internal Number: 2391530-1 | TE Connectivity RoHS : Compliant |
| 38,618 | ||
| 1534072-2 | TE Connectivity | MULTIF.ASSY MK2 2POS,AR Number of Positions: 2 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Alignment: With Mating Alignment Type: Polarization Standard Rectangular Connector | 2 Receptacle Connector Assembly With | Part Number: 1534072-2 | Internal Number: 1534072-2 | TE Connectivity RoHS : Compliant |
| 28,275 | ||
| 292215-3 | TE Connectivity | MINI CT SGL RELAY 3P NAT Number of Positions: 3 Connector & Housing Type: Plug to Plug Relay Header Connector Product Type: Connector Assembly Mating Retention: With Mating Retention Type: Locking Latch Standard Rectangular Connector | 3 Plug to Plug Relay Header Connector Assembly With | Part Number: 292215-3 | Internal Number: 292215-3 | TE Connectivity RoHS : Compliant |
| 12,825 | ||
| 3-641537-2 | TE Connectivity | 02P MTA100 CONN ASSY LF Number of Positions: 2 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Alignment: Without Mating Retention: With Mta Receptacle: Nylon & Tin Plated & 2.54 Mm | 2 Receptacle Connector Assembly Without | Part Number: 3-641537-2 | Internal Number: 3-641537-2 | TE Connectivity RoHS : Compliant |
| 12,496 | ||
| 3-641534-3 | TE Connectivity | 03P MTA100 CONN ASSY LF Number of Positions: 3 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Alignment: Without Mating Retention: With Mta Receptacle: Nylon & Tin Plated & 2.54 Mm | 3 Receptacle Connector Assembly Without | Part Number: 3-641534-3 | Internal Number: 3-641534-3 | TE Connectivity RoHS : Compliant |
| 2,869 | ||
| 5555153-5 | TE Connectivity | MJ,LPF,R/A,8P,PCBG,PSTP.11TTR Modular Jack & Plug Interface Type: RJ45 Port Configuration: Single Port Port Matrix Configuration: 1 x 1 Modular Jacks & Plugs Products: RJ Type Jacks & Plugs Modular Connector Style: Jack RJ45 Single Port 1 x 1 RJ Type Jacks & Plugs | Rj45 Connector | Part Number: 5555153-5 | Internal Number: 5555153-5 | TE Connectivity RoHS : Compliant |
| 2,127 | ||
| 215309-8 | TE Connectivity | 2X8P HV100 REC CON. TE, 8.5MM PCB Header & Receptacle | Part Number: 215309-8 | Internal Number: 215309-8 | TE Connectivity RoHS : Compliant |
| 1,693 | ||
| 5102153-5 | TE Connectivity | A/L UNIV HDR 24P VERT Connector System: Wire-to-Board Number of Positions: 24 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 24 2.54 mm .1" | Ribbon Cable Connector | Part Number: 5102153-5 | Internal Number: 5102153-5 | TE Connectivity RoHS : Compliant |
| 1,640 | ||
| 323153 | TE Connectivity | DG 22-16COM 22-18MIL HR R 10 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 22 – 16 AWG Wire Size: .26 – 1.65 mm² Wire Size: 509 – 3260 CMA Stud Size: #10 Closed Ring Tongue Terminal 22 – 16 AWG .26 – 1.65 mm² 509 – 3260 CMA | Ring Terminal | Part Number: 323153 | Internal Number: 323153 | TE Connectivity RoHS : Compliant |
| 933 | ||
| 1SNG601153R0000 | TE Connectivity | EP-SG-NPT38-BL-A Cable Gland Product Type: Cable Gland Cable Gland & Accessory Style: Standard Threaded Primary Product Material: PA 6 Clamping Diameter Range: 3 – 7 mm Outer Thread Type: NPT Cable Gland Standard Threaded PA 6 3 – 7 mm | Plastic Cable Glands Without Locknut | Part Number: 1SNG601153R0000 | Internal Number: 1SNG601153R0000 | TE Connectivity RoHS : Compliant |
| 685 | ||
| SBCHE1533RJ | TE Connectivity | BCHE 17 W 33R 5% Resistance Value: 33 Ω Element Type: Wire Wound Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 17 W Wirewound Resistor: Vertical Mount | 33 Ω Wire Wound Power Resistor 5 % | Part Number: SBCHE1533RJ | Internal Number: 1-1623729-7 | Alias Number: SBCHE1533RJF | TE Connectivity RoHS : Compliant |
| 380 | ||
| 323153-1 | TE Connectivity | DG 22-16COM 22-18MIL HR AU R10 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 22 – 16 AWG Wire Size: .26 – 1.65 mm² Wire Size: 509 – 3260 CMA Stud Size: #8 M4 Closed Ring Tongue Terminal 22 – 16 AWG .26 – 1.65 mm² 509 – 3260 CMA | Ring Terminal | Part Number: 323153-1 | Internal Number: 323153-1 | TE Connectivity RoHS : Compliant |
| 266 | ||
| 5102153-7 | TE Connectivity | A/L UNIV HDR 30P VERT Connector System: Wire-to-Board Number of Positions: 30 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 30 2.54 mm .1" | Ribbon Cable Connector | Part Number: 5102153-7 | Internal Number: 5102153-7 | TE Connectivity RoHS : Compliant |
| 192 | ||
| 1532188-1 | TE Connectivity | M83513/02-BN, MCKS-N1-B-15SS Number of Positions: 15 Connector & Housing Type: Receptacle Connector System: Cable-to-Board Connector Mounting Type: Panel Mount Centerline (Pitch): 1.27 mm D-Shaped Connector | 15 Receptacle Cable-to-Board Panel Mount | Part Number: 1532188-1 | Internal Number: 1532188-1 | Alias Number: 094-6226-0000 | 1.27 mm | TE Connectivity RoHS : Compliant |
| 98 | ||
 Teledyne HiRel | 54F153LMQB | Teledyne HiRel | DATA SEL/MULTIPLEXER, DUAL 4-INPUT | 0 | ||
5962-9153701MXA | Teledyne HiRel | AND/NAND GATE, QUINT RoHS : Not Compliant | 0 | |||
5962-9153601MYA | Teledyne HiRel | FLIP-FLOP, D-TYPE, TRIPLE RoHS : Not Compliant | 0 | |||
| 5962-9153701MYA | Teledyne HiRel | AND/NAND GATE, QUINT RoHS : Not Compliant | 0 | |||
| 5962-9153601MXA | Teledyne HiRel | FLIP-FLOP, D-TYPE, TRIPLE RoHS : Not Compliant | 0 | |||
| 54F153FMQB | Teledyne HiRel | DATA SEL/MULTIPLEXER, DUAL 4-INPUT | 0 | |||
| 5962-9153101MYA | Teledyne HiRel | TRANSLATOR, HEX ECL-TO-TTL RoHS : Not Compliant | 0 | |||
| 5962-9153101MXA | Teledyne HiRel | TRANSLATOR, HEX ECL-TO-TTL RoHS : Not Compliant | 0 | |||
| 54F153DMQB | Teledyne HiRel | DATA SEL/MULTIPLEXER, DUAL 4-INPUT | 0 | |||
 Vyrian | ADM6315-31D4ART-RL | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +3.08V, CMOS, PDSO4 RoHS : Not Compliant | 12,038 | ||
| ADM6315-32D2ART-RL7 | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +3.2VV, CMOS, PDSO4 RoHS : Not Compliant | 11,356 | |||
ADF4153YRUZ-RL | Analog Devices Inc | PLL Frequency Synthesizer, BICMOS, PDSO16 RoHS : Compliant | 10,498 | |||
| ADM6315-39D3ART-RL7 | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +3.9VV, CMOS, PDSO4 RoHS : Not Compliant | 10,404 | |||
| ADM6315-31D1ARTZRL | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +3.08V, PDSO4 RoHS : Compliant | 9,938 | |||
| 1-1532182-9 | TE Connectivity | D Type Connector, 25 Contact(s), Male, Plug RoHS : Not Compliant | 9,804 | |||
| 1N4153 | Texas Instruments | Rectifier Diode, 1 Phase, 1 Element, 0.15A, 75V V(RRM), Silicon RoHS : Not Compliant | 8,768 | |||
ADF4153BCPZ-RL7 | Analog Devices Inc | PLL Frequency Synthesizer, CMOS RoHS : Compliant | 8,576 | |||
| ADM6315-31D4ARTRL7 | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +3.08V, CMOS, PDSO4 RoHS : Not Compliant | 8,260 | |||
| ADE9153AACPZ | Analog Devices Inc | Analog Circuit, 1 Func RoHS : Compliant | 5,834 | |||
MAX5153BCPE | Maxim Integrated Products | D/A Converter, 2 Func, Serial Input Loading, 16us Settling Time, PDIP16 RoHS : Not Compliant | 4,554 | |||
PIC16F15375-E/MV | Microchip Technology Inc | RISC Microcontroller, 8-Bit, FLASH, PIC16 CPU, 32MHz, CMOS, PQCC40 RoHS : Compliant | 3,772 | |||
| PIC16F15355-I/MV | Microchip Technology Inc | RISC Microcontroller, 8-Bit, FLASH, PIC16 CPU, 32MHz, CMOS, PQCC28 RoHS : Compliant | 2,327 | |||
MXL1535ECWI-T | Maxim Integrated Products | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO28 RoHS : Not Compliant | 514 | |||
| 6-36153-1 | TE Connectivity | Ring Terminal, 1.65mm2 RoHS : Compliant | 82 | |||
 Wuhan P&S | NCP51530BMNTWG | onsemi | 700V-3.5/3A High/Low Side MOSFET Driver RoHS : Compliant |
| 32,000 |
| ALLDATASHEET vous a-t-il été utile ? [ DONATE ] |
À propos de Alldatasheet | Publicité | Contactez-nous | Politique de confidentialité | Lien vers la fiche technique | Echange de liens | Fabricants All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
French ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand