| Moteur de recherche de fiches techniques de composants électroniques |
|
1100BACSEM-R revendeur |
| revendeur | No de pièce | Fabricant | Description | Price | Qty. BuyNow | |
![]() Chip-Germany GmbH | FKP2J011001D00JO00 | Wima | RoHS : Compliant | 4,413 | ||
| ZMM 55-B22_R1_10001 | PanJit Semiconductor | 2,269 | ||||
| TS8601.100 | Ritmer | 129 | ||||
| CST1-100LC | Coilcraft Inc | RoHS : Compliant | 31 | |||
| M38510 11001BCA | National Semiconductor Corporation | 10 | ||||
| 47151-1001 | Molex | RoHS : Compliant | 4 | |||
| 01100 E33 | Wohmer | 4 | ||||
| T1A37211000-5 | Littelfuse Inc | 3 | ||||
| PSK1 1005229 | Sicmer | 1 | ||||
![]() Component Electronics, Inc | CR32-1100F-T | KYOCERA Corporation | IN STOCK SHIP TODAY | 10,000 | ||
| CPC-C1-100V-39P | Vishay BCcomponents | IN STOCK SHIP TODAY |
| 4,353 | ||
| NTHS-1205N01-100K-10%-R58 | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 4,144 | ||
| TMMH-110-01-G-D-ES | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,050 | ||
| F1100E-240 | Fox Electronics | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 579 | ||
| 561-1301-100 | Dialight | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 325 | ||
| F1100H-20.0000MHZ | Fox Electronics | IN STOCK SHIP TODAY |
| 250 | ||
| QNM1100A11-10.00MHZ | CTS Corporation | IN STOCK SHIP TODAY | 53 | |||
| 26-60-1100 | Molex | IN STOCK SHIP TODAY RoHS : Compliant | 50 | |||
| QNM1100A11-10.0MHZ | CTS Corporation | IN STOCK SHIP TODAY | 31 | |||
| F1100E-50.0000MHZ | Fox Electronics | IN STOCK SHIP TODAY |
| 21 | ||
| FTSH-110-02-L-DV-P | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 20 | ||
| 760051.1000 | LUETZE | IN STOCK SHIP TODAY |
| 15 | ||
| 26-60-1100 | IN STOCK SHIP TODAY |
| 15 | |||
| EC1100HS-25.000MHZ | Ecliptek Corporation | IN STOCK SHIP TODAY | 5 | |||
![]() DB Roberts | BI1100A | Essentra Components | 0.75 IN ROUND DOMED GLIDE ABS | 0 | ||
| 064362501100 | Essentra Components | LATCH, CAM QTR TURN WING KNOB, | 0 | |||
| 110062 | Essentra Components | 0 | ||||
| E3-1211-001 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E3-C111-00 | Southco | 0 | ||||
| 56-110-014 | Southco | Southcos 56 Spring-Loaded Plungers provide convenient installation and removal of components. Activated with a simple pull these plungers offer simplified positioning of sliding component and quick-release for easy removal. The 56 series provides design | 0 | |||
| 56-311-000 | Southco | 0 | ||||
| 7110-24-DN-711001 | Sugatsune Kogyo Co Ltd | CABINET LOCK WITH SAFETY KEY - | 0 | |||
| GSS1100A | Essentra Components | SHELF SUPPORT IN LIN PROFILE B | 0 | |||
| E3-1011-1006 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E5-2-031-100 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| 2402110003E | Essentra Components | 0 | ||||
| 56-371-1-000 | Southco | 56-371-1-000 | 0 | |||
| 699111001 | Essentra Components | HINGE, SURFACE MOUNT, LIFT OFF | 0 | |||
| 65110-00242 | Avdel | WASHER | 0 | |||
![]() Pasternack Enterprises US | PE3W11002-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini UHF, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. Mini UHF Female Bulkhead to Push-On Mini UHF Male Cable 72 Inch Length Using RG400 Coax., Radio frequency assembly mini UHF female bulkhead to push-on mini UHF male cable 72 inch length using RG400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini UHF female bulkhead to push-on mini UHF male cable 72 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini UHF to mini UHF cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini UHF bulkhead cable connection on one end and a mini UHF cable connection on the other. Our mini UHF to mini UHF cable assembly has a female gender on end 1 and a male on end 2. PE3W11002-72 can also be known as a mini UHF jack to mini UHF plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W11002-72 RF cable has a FEP jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. Mini UHF jack to mini UHF plug cable assembly PE3W11002-72 is built with RG400 which is a flexible coax type. The Pasternack flexible Mini UHF cable assembly is manufactured with mini UHF to mini UHF cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W11002-72 can also be used in the other direction and will be a mini UHF male to mini UHF female bulkhead cable assembly if the opposite connectivity is required. Mini UHF jack bulkhead to mini UHF plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini UHF to mini UHF cable assembly for quick shipment worldwide. Variations of mini UHF cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal Mini UHF to Mini UHF RF cable assembly as per your requirements. |
| 731 | |
| PE3W11002-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini UHF, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. Mini UHF Female Bulkhead to Push-On Mini UHF Male Cable 6 Inch Length Using RG400 Coax., Radio frequency assembly mini UHF female bulkhead to push-on mini UHF male cable 6 inch length using RG400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini UHF female bulkhead to push-on mini UHF male cable 6 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini UHF to mini UHF cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini UHF bulkhead cable connection on one end and a mini UHF cable connection on the other. Our mini UHF to mini UHF cable assembly has a female gender on end 1 and a male on end 2. PE3W11002-6 can also be known as a mini UHF jack to mini UHF plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W11002-6 RF cable has a FEP jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. Mini UHF jack to mini UHF plug cable assembly PE3W11002-6 is built with RG400 which is a flexible coax type. The Pasternack flexible Mini UHF cable assembly is manufactured with mini UHF to mini UHF cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W11002-6 can also be used in the other direction and will be a mini UHF male to mini UHF female bulkhead cable assembly if the opposite connectivity is required. Mini UHF jack bulkhead to mini UHF plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini UHF to mini UHF cable assembly for quick shipment worldwide. Variations of mini UHF cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal Mini UHF to Mini UHF RF cable assembly as per your requirements. |
| 731 | ||
| PE3TC1100 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-SF200LL, RF Cable Type: PE-SF200LL, RF Cable Impedance: 50. BNC Male to BNC Male Low Frequency Low Loss Cable Using PE-SF200LL Coax, RoHS. PE3TC1100 is a BNC male to BNC male cable using PE-SF200LL coax. This Pasternack BNC male to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3TC1100 BNC male to BNC male cable assembly is constructed with PE-SF200LL coax and the maximum VSWR is 1.35:1. | 82 | |||
| PE3C9301-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. N Male to UHF Male Low Loss Cable Using LMR-400-DB Coax in 100CM., Radio frequency assembly N male to UHF male low loss cable using LMR-400-DB coax in 100CM from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to UHF male low loss cable using LMR-400-DB coax in 100CM, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to UHF cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and UHF cable connection on the other. Our N type to UHF cable assemblies have a male gender on end 1 and male on end 2. This type N to UHF cable is a male to male coax assembly, PE3C9301-100CM, can also be known as a N type plug to UHF plug cable assembly and will be shipped same-day as it is purchased. Type N plug to UHF plug cable assembly PE3C9301-100CM is built with LMR-400-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency type N male to UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9301-100CM can also be used in the other direction and will be UHF male to type N male cable assembly if the opposite connectivity is required. Type N plug to UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to UHF cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to UHF male low loss cable using LMR-400-DB coax in 100CM. |
| 37 | ||
| PEM11002-KIT | Pasternack Enterprises |
| 2 | |||
| PE20DV1100 | Pasternack Enterprises | Key Specifications, Connector Series In: N, Connector Gender In: Female, Minimum Frequency: 700 MHz, Maximum Frequency: 2.7 GHz, Number of Output Ports: 3 Port, Impedance: 50 Ohm, Maximum Input Power: 30 Watt. 3 Way N Power Divider From 0.7 GHz to 2.7 GHz Rated at 30 Watts., The PE20DV1100 3-way waveguide power divider (also known as a coaxial power splitter) is rated for a minimum frequency of 700 MHz and a maximum frequency of 2.7 GHz. This Pasternack 3 port power divider/coaxial splitter has a 50 Ohm impedance and a maximum input power of 30 kW. Our coaxial RF splitter/divider has a female input and 3 female output ports. This RF power divider allows the splitting of a single signal into multiple signals with equal magnitude and phase. Our 3-way waveguide power divider has 300 kW of peak input power. Pasternack’s PE20DV1100 coax connectorized power splitter has an aluminum housing and can handle maximum reverse power up to 3 Watts. This threaded connector waveguide power divider has a 0.3 dB maximum amplitude balance. Our 50 Ohm radio frequency power divider is built to operate across a temperature range of -40 deg C to 85 deg C. Additional power divider specifications and dimensions can be found on its PDF specification datasheet and CAD drawings above. This 3-way RF power divider from Pasternack has a maximum insertion loss of 1 dB. The maximum input VSWR of this splitter/divider is 1.35:1 and the minimum isolation is 18 dB. The PE20DV1100 waveguide power divider from Pasternack is ideal for test and measurement, military communications, commercial communications, wireless communications and satcom applications. Our 3 port waveguide power divider is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This 3-way coaxial RF power divider splitter can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect waveguide power divider for your requirements. |
| 1 | ||
| PE3C1100 | Pasternack Enterprises | 0 | ||||
| PE3C11009/HS | Pasternack Enterprises | 0 | ||||
| PE3W11007 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to Smooth Bore SMP Male Bulkhead Cable Using PE-SR405FLJ Coax. PE3W11007 is a SMA male right angle to SMP male bulkhead cable using PE-SR405FLJ coax. This Pasternack SMA male right angle to SMP male bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMP for connector 2. SMA right angle to SMP coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male SMP bulkhead cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W11007 SMA male right angle to SMP male bulkhead cable assembly is constructed with PE-SR405FLJ coax. | 0 | |||
| PE3C8181-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male to SSMC Plug Low Loss Cable 100 CM Length Using LMR-100 Coax., Radio frequency assembly SMA male to SSMC plug low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SSMC plug low loss cable 100 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SSMC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SSMC cable connection on the other. Our low loss SMA to SSMC cable assembly has a male gender on end 1 and a plug on end 2. PE3C8181-100CM can also be known as a low loss SMA plug to SSMC male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C8181-100CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMA male to SSMC plug cable has a maximum VSWR of 1.4:1. SMA plug to SSMC male cable assembly PE3C8181-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SSMC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder (captive contact) attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8181-100CM can also be used in the other direction and will be a SSMC plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SSMC male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA and SSMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SSMC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C11000/YW | Pasternack Enterprises | 0 | ||||
| PE3CA1100/PH180 | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE1V11005 | Pasternack Enterprises |
| 0 | |||
| PE3W01100 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm. SMA Male to SMP Female Cable Using PE-SR047FL Coax. PE3W01100 is a SMA male to SMP female cable using PE-SR047FL coax. This Pasternack SMA male to SMP female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMP for connector 2. Our male SMA to female SMP cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W01100 SMA male to SMP female cable assembly is constructed with PE-SR047FL coax. | 0 | |||
| PE70MP1100 | Pasternack Enterprises | Key Specifications, Connector In Series: BNC, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: BNC, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm BNC Male to 75 Ohm BNC Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1100 from Pasternack has BNC connector in and is 50 Ohm, BNC connector out and is 75 Ohm. This coaxial BNC to BNC impedance matching pad has a male BNC in and a female BNC out. Our 50 Ohm BNC to 75 Ohm BNC impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm BNC male to 75 Ohm BNC female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm BNC to 75 Ohm BNC matching pad is brass. 50 Ohm BNC male to 75 Ohm BNC female RF impedance pad PE70MP1100 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with BNC to BNC connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 0 | ||
![]() Teledyne HiRel | M38510/11004BCA![]() | Teledyne HiRel | OP AMP, QUAD RoHS : Not Compliant | 0 | ||
M38510/11004BAA![]() | Teledyne HiRel | OP AMP, QUAD RoHS : Not Compliant | 0 | |||
M38510/11001BZA![]() | Teledyne HiRel | OP AMP, QUAD RoHS : Not Compliant | 0 | |||
M38510/11003BDA![]() | Teledyne HiRel | OP AMP, QUAD RoHS : Not Compliant | 0 | |||
| M38510/11001BAA | Teledyne HiRel | OP AMP, QUAD RoHS : Not Compliant | 0 | |||
M38510/11003BAA![]() | Teledyne HiRel | OP AMP, QUAD RoHS : Not Compliant | 0 | |||
M38510/11003BCA![]() | Teledyne HiRel | OP AMP, QUAD RoHS : Not Compliant | 0 | |||
M38510/11001BDA![]() | Teledyne HiRel | OP AMP, QUAD RoHS : Not Compliant | 0 |
| ALLDATASHEET vous a-t-il été utile ? [ DONATE ] |
À propos de Alldatasheet | Publicité | Contactez-nous | Politique de confidentialité | Lien vers la fiche technique | Echange de liens | Fabricants All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |