Moteur de recherche de fiches techniques de composants électroniques
  French  ▼
ALLDATASHEET.FR

X  



1008CP-R91 revendeur

revendeurNo de pièceFabricantDescriptionPriceQty.
BuyNow

DB Roberts
100829

Pop Rivets TAPD510BS 042 B5K
0
010080B018

Essentra Components BINDER SLOTTED SCREW, 0-80 THR
0
010080B018B

Essentra Components 080 X 316 BINDER HEAD SLOT BLK
0
010080R012

Essentra Components ROUND SLOTTED SCREW, 0-80 THRE
0
010080R012B

Essentra Components 080 X 18 ROUND HD SLOTTED BLK
0
01121-00813

Avdel CHOBERT RIV 14 SN ST
0
02691-00805

Avdel AVDELOK PIN 14 BR SS
0
2100-832-N

RAF Electronic Hardware
0
2100-832-A

RAF Electronic Hardware
0
1008-080-SS

RAF Electronic Hardware
0
10086F

Heyco HLSP3-18 V-0 NATURAL
0
10088

Heyco HLSP3-22 NATURAL
0
01610-08155

Avdel AVEX 532 ASSY
0
02221-00819

Avdel HEMLOK 6.4MM
0
02721-00821

Avdel MONOBOLT. 6.5 MM S VA/VA
0

Pasternack Enterprises US
PE410-08593

Pasternack Enterprises Key Specifications, Polarity: Standard, Connector Series: TRB, Connector Gender: Jack, Impedance: 78 Ohm, Body Style: Straight, Attachment Method: Solder/Solder, Mount Method: Bulkhead, Minimum Frequency: DC, Maximum Frequency: 500 MHz, Interface Type 1: TRB PLUG. 78 Ohm TRB Jack Bulkhead Mount 1553 Connector Solder Attachment TRB PLUG,. PE410-08593 TRB jack bulkhead triaxial connector has an interface type of TRB jack trb plug and a 78 Ohm impedance.Pasternack TRB jack bulkhead connector uses shield/contact solder/solder as an attachment method. Our jack TRB triaxial connector provides a minimum frequency of DC and a maximum frequency of 500 MHz. The Pasternack TRB triaxial connector has a brass body with nickel plating. This TRB jack bulkhead triaxial RF connector is REACH compliant. Our high quality PE410-08593 features a ASTM-B-733 body plating specification. We also build TRB custom connector cable assemblies that will ship the same day as well. Our bulkhead TRB jack connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. For further information on similar products, our expert technical support and trained sales team can get you to the perfect RF connector as per your requirement.
1 : $29.09
25 : $27.64
50 : $26.18
100 : $25.02
436
PE910082

Pasternack Enterprises Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Brass, Connector Body Plating 1: Nickel, Connector Mount Method 2: None, Connector Body Material 2: Brass, Connector Body Plating 2: Nickel. Commercial Grade BNC Male to SMA Male Adapter., The commercial grade BNC to SMA adapter PE910082 is part of our full line of available RF, microwave, and millimeter wave components from Pasternack. Our radio frequency adapter comes with a 50 Ohm impedance. This RF adapter has a male to male gender configuration, which provides easier connections in tighter spaces. This BNC male to SMA male adapter is one of the many RF components that ship the same business day as they are ordered. The PE910082 male BNC to male SMA adapter has a straight body. This Pasternack BNC to SMA coax adapter is an in-line RF adapter in a commercial grade design. Our RF adapter is often used to enable connections between two connector types that would otherwise not mate. This commercial grade RF adapter has a 1.21-inch length, 0.62-inch width, and 0.4 lbs weight. The PE910082 adapter from Pasternack is made from a brass connector body and has a brass center contact. Our BNC male to SMA male radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/disconnect cycles is high. Additional dimensions and specifications for this between series adapter are on our downloadable PDF datasheet above. Pasternack has one of the largest in-stock selections of BNC to SMA radio frequency commercial grade adapters for international and domestic orders, including custom cable assemblies. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality RF adapter that meets your requirements.
1 : $17.59
5 : $17.24
10 : $16.89
25 : $16.53
356
PE410-08030-206

Pasternack Enterprises Key Specifications, Polarity: Standard, Connector Series: TRB, Connector Gender: Plug, Impedance: 78 Ohm, Body Style: Straight, Attachment Method: Crimp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 500 MHz, Interface Type 1: M17/176-00002. 78 Ohm TRB Plug 1553 Connector Crimp/Solder Attachment for M17/176-00002,. PE410-08030-206 TRB plug coaxial connector has an interface type of TRB plug M17/176-00002 and a 78 Ohm impedance.Pasternack TRB plug connector uses shield/contact crimp/solder as an attachment method. Our plug TRB coaxial connector provides a minimum frequency of DC and a maximum frequency of 500 MHz. The Pasternack TRB coaxial connector has a brass body with nickel plating. This TRB plug coaxial RF connector is REACH compliant. Our high quality PE410-08030-206 features a ASTM-B-733 body plating specification. We also build TRB custom connector cable assemblies that will ship the same day as well. Our TRB plug connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. For further information on similar products, our expert technical support and trained sales team can get you to the perfect RF connector as per your requirement.
1 : $51.59
25 : $49.01
50 : $46.43
100 : $44.37
230
PEANED1008

Pasternack Enterprises Key Specifications, Polarization: Vertical, Minimum Frequency: 406 MHz, Maximum Frequency: 512 MHz, Connector Series: N, Connector Gender: Female, Maximum Input VSWR: 1.8:1. 1 Folded Dipole antenna, 406 MHz - 512 MHz, 4 dBi gain, 1/2 Wave Bidirectional pattern, V-pol, Type N Female Connector. Pasternack’s PEANED1008 is a high performance, single element exposed folded dipole antenna designed to operate from 406 to 512 MHz has 4.1 dBi / 1.95 dBd of high gain. The PEANED1008 is ideal for boosting radar, GPR/WPR, FM Radio, TV broadcasts, public safety, LMR / PMR and aviation. The PEANED1008 can be used for long distance communications over a wide range of applications for UHF frequency band communication systems. The PEANED1008 from Pasternack exposed dipole antennas are robust, outdoor, weatherproof, and high velocity wind sustainable antennas made up of high-grade aluminum alloys for longevity and resistant to corrosion. The PEANED1008 has Vertical polarization, 68 vertical beamwidth. The included mounting kit allows for very easy and quick time installations with less effort. These exposed dipoles are already tuned to be Half wavelength away from the mast and do not require any further field adjustments. Pasternack’s dipole antennas PEANED1008 are premium quality 1-bay dipole antenna has bidirectional pattern with 100W maximum power handling capability which are side mounted with ½ wave spacing from the mast and has a pigtail terminated with 1 Type N female connector. The 4.1 dBi/ 1.95 dBd max gain single element half wave exposed folded dipole PEANED1008 antennas operates in UHF bands. This 406 to 512 MHz antenna have central support mast precisely designed for easy dipole attachments which fit tightly for error free and quick installations and ease for transportation. Pasternack’s half wave dipole antenna with Type N connector is in stock and ready to ship the same day. Contact Pasternack’s knowledgeable and friendly technical support and sales staff for your answers on antennas or other products.
1 : $652.99
10 : $626.87
25 : $600.75
100 : $574.63
42
PEWCA1008

Pasternack Enterprises Key Specifications, Waveguide Size: WR-90, Coax Connector Impedance: 50 Ohm, Coax Connector Series: N, Coax Connector Gender: Female, Waveguide Adapter Style: Right Angle, Minimum Frequency: 8.2 GHz, Maximum Frequency: 12.4 GHz. WR-90 UG-39/U Square Cover Flange to N Female Waveguide to Coax Adapter Operating from 8.2 GHz to 12.4 GHz. PEWCA1008 WR-90 waveguide to coax adapter is also known as a WR-90 waveguide transition. This waveguide to coax adapter / transition is constructed as a WR-90 to N type connector and has a female gender. Our WR-90 to type N female waveguide adapter transition has a right angle design and has a square cover flange. Pasternack right angle WR-90 to type N waveguide to coaxial cable transition / adapter has a minimum frequency of 8.2 GHz and a maximum frequency of 12.4 GHz. WR 90 waveguide to type N transition adapter to coax PEWCA1008 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our WR-90 waveguide adapter transition with type N interface can ship worldwide the same day that it is purchased as with our other available RF parts.
1 : $1,200.0
5 : $1,152.0
10 : $1,104.0
7
PEWCT1008

Pasternack Enterprises
1 : $2,480.0
5 : $2,380.8
10 : $2,281.6
5
PE51PD1008

Pasternack Enterprises Key Specifications. Antenna Type Parabolic Polarization H/V or 45 Deg. Slant Minimum Frequency 4.95 GHz Maximum Frequency 7.125 GHz Connector 1 Polarity Reverse Polarity Connector Series SMA Impedance 50 Ohm. 4950 MHz to 7125 MHz, 2-foot collapsible Parabolic Antenna, 2x2 MIMO, 30 dBi, RPSMA, 2 Pack. MIMO H/V or 45 deg. slant polarized parabolic 2-foot antenna PE51PD1008 from Pasternack is part of our extensive in-stock antennas that ship the same day from our ISO 9001:2015 certified facility. The MIMO antenna with a 4950 to 7125 MHz frequency range has a maximum input VSWR of 2.5:1. This 2-pack antenna has a 2-port RP-SMA connector. This collapsible parabolic antenna has a white radome made of aluminum, an overall length of 23.6 in, width of 23.6 in, and weighs 14.33 lbs. Pasternack’s PE51PD1008 is a single-band parabolic antenna operating from 4950 to 7125 MHz with 30 dBi gain. Pasternack's experts are on hand to assist you with any inquiries. Order this PE51PD1008 MIMO parabolic antenna 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping.
1 : $684.99
10 : $671.29
25 : $657.59
100 : $643.89
1
PE3C10087

Pasternack Enterprises Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. 3.5mm Male to N Male Cable Using PE-SR402FL Coax., Radio frequency assembly 3.5mm male to N male cable using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm male to N male cable using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a type N cable connection on the other. Our a 3.5mm to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10087 can also be known as a 3.5mm plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm plug to type N plug cable assembly PE3C10087 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to type N cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10087 can also be used in the other direction and will be type N male to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to type N cable assembly for quick shipment worldwide. Variations of 3.5mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to type N RF cable assembly as per your requirements.
0
PE3C10087-12

Pasternack Enterprises Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 3.5mm Male to N Male Cable 12 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm male to N male cable 12 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm male to N male cable 12 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a type N cable connection on the other. Our a 3.5mm to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10087-12 can also be known as a 3.5mm plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm plug to type N plug cable assembly PE3C10087-12 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to type N cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10087-12 can also be used in the other direction and will be type N male to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to type N cable assembly for quick shipment worldwide. Variations of 3.5mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to type N RF cable assembly as per your requirements.
1 : $235.99
25 : $224.19
50 : $212.39
100 : $202.95
0
PE3C10086

Pasternack Enterprises Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. 3.5mm Female Bulkhead to TNC Female Bulkhead Cable Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female bulkhead to TNC female bulkhead cable using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female bulkhead to TNC female bulkhead cable using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm bulkhead cable connection on one end and a TNC bulkhead cable connection on the other. Our a 3.5mm to a TNC cable assembly has female gender on end 1 and female on end 2. PE3C10086 can also be known as a 3.5mm jack to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to TNC jack cable assembly PE3C10086 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10086 can also be used in the other direction and will be TNC female bulkhead to 3.5mm female bulkhead cable assembly if the opposite connectivity is required. 3.5mm jack bulkhead to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements.
0
PE3W10080

Pasternack Enterprises Key Specifications, Connector Series 1: SHV, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG225/U, RF Cable Type: RG225, RF Cable Impedance: 50 Ohm. SHV Jack Bulkhead to SHV Plug Cable Using RG225 Coax. PE3W10080 is a SHV jack bulkhead to SHV plug cable using RG225 coax. This Pasternack SHV jack bulkhead to SHV plug cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm SHV for connector 2. Our jack SHV bulkhead to plug SHV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10080 SHV jack bulkhead to SHV plug cable assembly is constructed with RG225 coax.
0
PE15A1008

Pasternack Enterprises Key Specifications, Gain: 25 dB, Power Output: 13.5 dBm P1dB, Frequency, Min: 20 MHz, Frequency, Max: 3 GHz, Noise Figure, Max: 1.9 dB, Design: Low Noise, Voltage, DC Max: 15 Volts, Current, DC Max: 120 mA, Connector Series: SMA. 25 dBm IP3, 1.6 dB NF, 13.5 dBm P1dB, 20 MHz to 3 GHz, Low Noise Amplifier, 25 dB Gain, SMA. PE15A1008 low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise amplifier uses SMA connectors at 50 Ohm. This SMA low noise amplifier has a minimum frequency of 20 MHz and maximum frequency of 3 GHz. The significantly low noise figure of this radio frequency amplifier is 1.9 dB with a typical gain of 25 dB. LNA amplifier PE15A1008 is rated at 15 Volts DC maximum and 120 mA. Our low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.
1 : $1,060.0
5 : $1,017.6
10 : $975.2
0
PE3C10089

Pasternack Enterprises Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. 3.5mm Male to N Female Cable Using PE-SR402FL Coax., Radio frequency assembly 3.5mm male to N female cable using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm male to N female cable using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a type N cable connection on the other. Our a 3.5mm to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10089 can also be known as a 3.5mm plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm plug to type N jack cable assembly PE3C10089 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to type N cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10089 can also be used in the other direction and will be type N female to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to type N cable assembly for quick shipment worldwide. Variations of 3.5mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to type N RF cable assembly as per your requirements.
0
PE3C10080-24

Pasternack Enterprises Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 3.5mm Female to TNC Male Cable 24 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female to TNC male cable 24 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female to TNC male cable 24 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a TNC cable connection on the other. Our a 3.5mm to a TNC cable assembly has female gender on end 1 and male on end 2. PE3C10080-24 can also be known as a 3.5mm jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to TNC plug cable assembly PE3C10080-24 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10080-24 can also be used in the other direction and will be TNC male to 3.5mm female cable assembly if the opposite connectivity is required. 3.5mm jack to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements.
1 : $231.99
25 : $220.39
50 : $208.79
100 : $199.51
0
PE3C10083

Pasternack Enterprises Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. 3.5mm Female to TNC Female Bulkhead Cable Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female to TNC female bulkhead cable using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female to TNC female bulkhead cable using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a TNC bulkhead cable connection on the other. Our a 3.5mm to a TNC cable assembly has female gender on end 1 and female on end 2. PE3C10083 can also be known as a 3.5mm jack to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to TNC jack cable assembly PE3C10083 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10083 can also be used in the other direction and will be TNC female bulkhead to 3.5mm female cable assembly if the opposite connectivity is required. 3.5mm jack to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements.
0

Waytek, Inc.
10080

Hillsdale Terminal & Tool Inc 22-18 GA Butt Connectors NON-INSULATED
100 : $0.0552
200 : $0.0501
500 : $0.0448
1,000 : $0.0406
5,000 : $0.0388
231,317
19141-0085

Molex 12-10 GA #10 Spade Terminal Non-Insulated
RoHS : Compliant
100 : $0.1707
200 : $0.1551
500 : $0.1379
1,000 : $0.1253
5,000 : $0.1195
18,246
OS110-08

NSPA 12-10GA Ring #8 Connector Yellow Stripe Heat Shrink Clear 3280132508 32708
10 : $1.1347
50 : $1.0112
100 : $0.9176
200 : $0.8876
500 : $0.8576
1,000 : $0.824
1,242
57080 OR 611-008

Ideal Clamp Products Inc Standard Stainless Steel Band Hose Clamp #8 Band 1/2" 7/16 TO 1 IN
10 : $1.378
50 : $1.2299
100 : $1.116
200 : $1.0819
500 : $1.0421
1,000 : $1.0022
1,031
14100853

Sargent Quality Tools Crimp Tool Ratchet Assembly Delphi GM 08913440 Formally MFG PN 3182 LCT
1 : $212.23
10 : $199.34
25
14100855

Sargent Quality Tools Metri-Pack Crimping Tool DELPHI # 12070947 (Formally PN SP2740/3184LCT)
1 : $212.23
10 : $199.34
3
13510085

Aptiv PLC Aptiv 13510085 is a 2-way sealed female connector in the compact GT 150 Series. The rugged, waterproof housing uses integrated connector position assurance and supports terminal position assurance, cable seals, and cavity plugs for reliable connections in space-limited vehicle and equipment applications.
10 : $0.9708
50 : $0.9347
100 : $0.8384
200 : $0.7982
500 : $0.7703
1,000 : $0.7421
0
14100859

Sargent Quality Tools Crimp Tool 8 Ga - 2 Ga (Formally PN SP2747 / 6220 CT)
1 : $179.83
10 : $168.9
0

Win Source Electronics
LTV-1008-TP1-G

Lite-On Semiconductor Corporation
RoHS : Compliant
8,065 : $0.0372
6,460 : $0.0387
4,965 : $0.0403
3,465 : $0.0433
2,235 : $0.0448
1,050 : $0.0478
380,000
046841033100846+

Kyocera Electronic Components & Devices CONN FPC VERT 33POS 0.3MM SMD
455 : $0.8538
340 : $0.9521
265 : $0.9845
195 : $1.0181
125 : $1.0504
55 : $1.2807
144,400
LTV-1008-TP-G

Lite-On Semiconductor Corporation
RoHS : Compliant
4,995 : $0.0601
3,730 : $0.0671
2,885 : $0.0694
2,095 : $0.0717
1,355 : $0.074
555 : $0.0902
78,000
0451008.MRL

Littelfuse Inc Fuse Chip Very Fast Acting 8A 125V SMD Solder Pad 2410 Ceramic T/R CE/CSA/PSE/UL / FUSE BRD MNT 8A 125VAC/VDC 2SMD
RoHS : Compliant
2,070 : $0.1451
1,550 : $0.1618
1,195 : $0.1674
870 : $0.1729
565 : $0.1785
230 : $0.2176
60,000
CPC1008N

IXYS Integrated Circuits Division SSR RELAY SPST-NO 150MA 0-100V / Solid State SPST-NO (1 Form A) 4-SOP (0.150", 3.81mm)
RoHS : Compliant
179 : $1.6773
144 : $1.7455
111 : $1.8137
77 : $1.95
50 : $2.0182
24 : $2.1546
48,828
ZXCT1008FTA

Diodes Incorporated IC CURRENT MONITOR 1% SOT23-3
RoHS : Compliant
850 : $0.3541
635 : $0.395
490 : $0.4086
360 : $0.4222
230 : $0.4358
95 : $0.5312
39,171
MADL-011008-14120T

MACOM Low Insertion Loss and Noise Figure | RF DIODE PIN 6DFN
RoHS : Compliant
101 : $2.9861
76 : $3.3306
59 : $3.4455
43 : $3.5603
28 : $3.6752
12 : $4.4791
28,846
CLA4610-085LF

Skyworks Solutions Inc RF DIODE PIN 120V 10W 3QFN / RF Diode PIN - Single 120V 100 mA 10 W 3-QFN (2x2)
RoHS : Compliant
21 : $14.797
17 : $15.3985
13 : $16.0
9 : $17.2031
6 : $17.8046
3 : $19.0076
10,000
744771008

Wurth Elektronik POWER-CHOKE WE-PD | FIXED IND 8.2UH 6.25A 20 MOHM
RoHS : Compliant
270 : $1.121
200 : $1.2504
155 : $1.2935
115 : $1.3366
75 : $1.3797
30 : $1.6815
6,000
FPF1008

onsemi IC PWR SWITCH P-CH 1:1 6MICROFET
RoHS : Compliant
16 : $19.5489
12 : $21.8046
9 : $22.5564
7 : $23.3083
5 : $24.0602
2 : $29.3234
3,500
NB7L1008MMNG

onsemi IC CLK BUFFER 1:8 8GHZ 32QFN
RoHS : Compliant
13 : $24.1307
10 : $26.915
8 : $27.8431
6 : $28.7712
4 : $29.6993
2 : $36.196
3,189
AS6C1008-55SIN

Alliance Memory Inc SRAM Chip Async Single 3V 1M-bit 128K x 8 55ns 32-Pin SOP Tube / IC SRAM 1MBIT 55NS 32SOP
RoHS : Compliant
35 : $8.797
26 : $9.8121
20 : $10.1504
15 : $10.4888
10 : $10.8271
4 : $13.1955
2,670
AS6C1008-55SINTR

Alliance Memory Inc IC SRAM 1MBIT 55NS 32SOP
RoHS : Compliant
35 : $8.797
26 : $9.8121
20 : $10.1504
15 : $10.4888
10 : $10.8271
4 : $13.1955
2,440
65801-008LF

Amphenol Corporation CONN FFC FPC RCPT 8POS 2.54MM / 8 Position FFC, FPC Connector Receptacle 0.100" (2.54mm) Free Hanging (In-Line)
330 : $0.9137
250 : $1.0191
190 : $1.0543
140 : $1.0894
90 : $1.1246
40 : $1.3705
1,500
M5M51008DFP-55H

Renesas Electronics Corporation
RoHS : Compliant
79 : $4.2823
59 : $4.7765
46 : $4.9411
33 : $5.1059
22 : $5.2706
9 : $6.4234
949

Lien URL



ALLDATASHEET vous a-t-il été utile ?  [ DONATE ]  

À propos de Alldatasheet   |   Publicité   |   Contactez-nous   |   Politique de confidentialité   |   Lien vers la fiche technique    |   Echange de liens   |   Fabricants
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com