DESCRIPTION
The SCSI–2 and SCSI–3 standards recommend the use of active terminations at both ends of every cable segment in a SCSI system with single–ended drivers and receivers. The DS2114 SCSI Terminator, which is fully compliant with these standards, enables the designer to gain the benefits of active termination: greater immunity to voltage drops on the TERMPWR (TERMination PoWeR) line, enhanced high–level noise immunity, intrinsic TERMPWR decoupling, and very low quiescent current consumption. The DS2114 integrates a regulator and nine precise 110 ohms termination resistors into a monolithic IC. The DS2114 is intended for cable end terminator assemblies and devices where the terminators do not need to be isolated from the SCSI bus.

FEATURES
• Fully compliant with SCSI, SCSI–2 and SCSI–3 standards
• Provides active termination for nine signal lines
• Laser–trimmed 110 ohms termination resistors have 2% tolerance
• Low dropout voltage regulator
• Fully supports actively negated SCSI signals
• Onboard thermal shutdown circuitry
• Narrow 16–pin plastic SOIC (DS2114Z)