Low Power PLL Tuning Circuits for 3-Wire Bus

The MC44827/27B are tuning circuits for TV and VCR tuner applications. They contain on one chip all the functions required for PLL control of a VCO. The integrated circuits also contain a high frequency prescaler and thus can handle frequencies up to 1.3 GHz.
The MC44827 has programmable 512/1024 reference divider while the MC44827B has a fixed reference divider of 1024.
The MC44827/27B offer the same features as MC44817/17B but has improved sensitivity performance and reduced power dissipation. The low frequency preamplifier has been removed and the operational amplifier pull–up resistor has been increased to 60 kΩ.
The MC44827/27B are controlled via a 3–wire bus. The MC44827/27B have the same functions as the MC44828 which is I2C bus controlled. The MC44827/27B and the MC44828 can be exchanged to allow conversion between 3–wire bus and I2C bus control.
The MC44827/27B are manufactured on a single silicon chip using Motorola’s high density bipolar process, MOSAIC™ (Motorola Oxide Self Aligned Implanted Circuits).

• Complete Single Chip System for MPU Control (3–Wire Bus). Data and Clock Inputs are I2C Bus Compatible
• Divide–by–8 Prescaler Accepts Frequencies up to 1.3 GHz
• 15 Bit Programmable Divider Accepts Input Frequencies up to 165 MHz
• 3–State Phase/Frequency Comparator
• Operational Amplifier for Direct Tuning Voltage Output (30 V)
• Four Integrated PNP Band Buffers can drive up to 40 mA (VCC1 to 14.4 V)
• Output Options for the Reference Frequency and the Programmable Divider
• Bus Protocol for 18 or 19 Bit Transmission
• Extra 34–Bit Protocol for Test and Further Features
• High Sensitivity Preamplifier
• Lower Power Consumption, 200 mW Typical
• Improved Prescaler with Higher Margins for Sensitivity and Temperature Range
• Lock Detector with Push–Pull Output
• Space–Saving TSSOP Package
• ESD Protected to MIL–STD–883C, Method 3015.7 (1.5 kΩ,100 pF)