Description
The STM32F21x family is based on the high-performance ARM® Cortex™-M3 32-bit RISC core operating at a frequency of up to 120 MHz. The family incorporates high-speed embedded memories (Flash memory up to 1 Mbyte, up to 128 Kbytes of system SRAM), up to 4 Kbytes of backup SRAM, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, three AHB buses and a 32-bit multi-AHB bus matrix.
The devices also feature an adaptive real-time memory accelerator (ART Accelerator™) which allows to achieve a performance equivalent to 0 wait state program execution from Flash memory at a CPU frequency up to 120 MHz. This performance has been validated using the CoreMark benchmark.

Features
■ Core: ARM 32-bit Cortex™-M3 CPU (120 MHz max) with Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution performance from Flash memory, MPU, 150 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1)
■ Memories
   – Up to 1 Mbyte of Flash memory
   – 512 bytes of OTP memory
   – Up to 128 + 4 Kbytes of SRAM
   – Flexible static memory controller that supports Compact Flash, SRAM, PSRAM, NOR and NAND memories
   – LCD parallel interface, 8080/6800 modes
■ CRC calculation unit
■ Clock, reset and supply management
   – From 1.8 to 3.6 V application supply+I/Os
   – POR, PDR, PVD and BOR
   – 4 to 26 MHz crystal oscillator
   – Internal 16 MHz factory-trimmed RC
   – 32 kHz oscillator for RTC with calibration
   – Internal 32 kHz RC with calibration
■ Low power
   – Sleep, Stop and Standby modes
   – VBAT supply for RTC, 20 × 32 bit backup registers, and optional 4 KB backup SRAM
■ 3 × 12-bit, 0.5 µs ADCs with up to 24 channels and up to 6 MSPS in triple interleaved mode
■ 2 × 12-bit D/A converters
■ General-purpose DMA: 16-stream controller with centralized FIFOs and burst support
■ 96-bit unique ID
■ Up to 17 timers
   – Up to twelve 16-bit and two 32-bit timers, up to 120 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
■ Debug mode: Serial wire debug (SWD), JTAG, and Cortex-M3 Embedded Trace Macrocell™
■ Up to 140 I/O ports with interrupt capability:
   – Up to 136 fast I/Os up to 60 MHz
   – Up to 138 5 V-tolerant I/Os
■ Up to 15 communication interfaces
   – Up to 3 × I2C interfaces (SMBus/PMBus)
   – Up to 4 USARTs and 2 UARTs (7.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control)
   – Up to 3 SPIs (30 Mbit/s), 2 with muxed I2S to achieve audio class accuracy via audio PLL or external PLL
   – 2 × CAN interfaces (2.0B Active)
   – SDIO interface
■ Advanced connectivity
   – USB 2.0 full-speed device/host/OTG controller with on-chip PHY
   – USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI
   – 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII
■ 8- to 14-bit parallel camera interface (48 Mbyte/s max)
■ Cryptographic acceleration
   – Hardware acceleration for AES 128, 192, 256, Triple DES, HASH (MD5, SHA-1)
   – Analog true random number generator
■ Analog true random number generator