GENERAL DESCRIPTION
The Am29LV010B is a 1 Mbit, 3.0 Volt-only Flash memory device organized as 131,072 bytes. The
Am29LV010B has a uniform sector architecture. The device is offered in 32-pin PLCC and 32-pin TSOP packages. The byte-wide (x8) data appears on DQ7-DQ0. All read, erase, and program operations are accomplished using only a single power supply. The device can also be programmed in standard EPROM programmers.

DISTINCTIVE CHARACTERISTICS
❥ Single power supply operation
   — Full voltage range: 2.7 to 3.6 volt read and write
      operations for battery-powered applications
   — Regulated voltage range: 3.0 to 3.6 volt read and
      write operations and for compatibility with high
      performance 3.3 volt microprocessors
❥ Manufactured on 0.32 µm process technology
❥ High performance
   — Full voltage range: access times as fast as 55 ns
❥ Ultra low power consumption (typical values at 5 MHz)
   — 200 nA Automatic Sleep mode current
   — 200 nA standby mode current
   — 7 mA read current
   — 15 mA program/erase current
❥ Flexible sector architecture
   — Eight 16 Kbyte
   — Supports full chip erase
   — Sector Protection features:
      Hardware method of locking a sector to prevent
      any program or erase operations within that sector
      Sectors can be locked in-system or via
      programming equipment
      Temporary Sector Unprotect feature allows code
      changes in previously locked sectors
❥ Unlock Bypass Mode Program Command
   — Reduces overall programming time when issuing multiple program command sequences
❥ Embedded Algorithms
   — Embedded Erase algorithm automatically preprograms and erases the
      entire chip or any combination of designated sectors
   — Embedded Program algorithm automatically writes and verifies data at specified addresses
❥ Minimum 1,000,000 write cycle guarantee per sector
❥ 20 Year data retention at 125°C
   — Reliable operation for the life of the system
❥ Package option
   — 32-pin TSOP
   — 32-pin PLCC
❥ Compatibility with JEDEC standards
   — Pinout and software compatible with singlepower supply Flash
   — Superior inadvertent write protection
❥ Data# Polling and toggle bits
   — Provides a software method of detecting program or erase operation completion
❥ Erase Suspend/Erase Resume
   — Supports reading data from or programming data to a sector that is not being erased