The 10XSC425 is one in a family of devices designed for low-voltage lighting or factory automation applications. Its four low RDS(ON) MOSFETs (dual 10 mΩ/dual 25 mΩ) can control four separate 55 W / 28 W bulbs, and/or Xenon modules, and/or LEDs, and/or DC low voltage motors.

Features
• Four protected 10 mΩ and 25 mΩ high side switches (at 25 °C)
• Operating voltage range of 6.0 to 20 V with sleep current  < 5.0 μA, extended mode from 4.0 to 28 V
• 8.0 MHz 16-bit 3.3 V and 5.0 V SPI control and status reporting with daisy chain capability
• PWM module using external clock or calibratable internal oscillator with programmable output delay management
• Smart overcurrent shutdown, severe short-circuit, overtemperature protections with time limited autoretry, and fail safe mode, in case of MCU damage
• Output OFF or ON open-load detection compliant to bulbs or leds and short to battery detection.
• Analog current feedback with selectable ratio and board temperature feedback

Applications
• Low-voltage industrial lighting
• Halogen lamps
• Incandescent bulbs
• Light-emitting diodes (LEDs)
• HID Xenon ballasts
• Low voltage factory automation