GENERAL DESCRIPTION
The AD9822 is a complete analog signal processor for CCD imaging applications. It features a 3-channel architecture designed to sample and condition the outputs of trilinear color CCD arrays. Each channel consists of an input clamp, correlated double sampler (CDS), offset DAC, and programmable gain amplifier (PGA) multiplexed to a high performance 14-bit ADC.
The CDS amplifiers may be disabled for use with sensors such as contact image sensors (CIS) and CMOS active pixel sensors, which do not require CDS.
The 14-bit digital output is multiplexed into an 8-bit output word that is accessed using two read cycles. The internal registers are programmed through a 3-wire serial interface and provide adjustment of the gain, offset, and operating mode.
The AD9822 operates from a single 5 V power supply, consumes 385 mW of power typically, and is packaged in a 28-lead SOIC or SSOP.

FEATURES
  14-bit 15 MSPS ADC
  No missing codes guaranteed
  3-channel operation up to 15 MSPS
  1-channel operation up to 12.5 MSPS
  Correlated double sampling
  1–6× programmable gain
  ±350 mV programmable offset
  Input clamp circuitry
  Internal voltage reference
  Multiplexed byte-wide output (8 + 6 format)
  3-wire serial digital interface
  3 V/5 V digital I/O compatibility
  28-Lead SOIC or SSOP
  Low power CMOS: 385 mW (typ)
  Power-down mode: <1 mW
 
APPLICATIONS
  Flatbed document scanners
  Film scanners
  Digital color copiers
  Multifunction peripherals