INTRODUCTION
The ST72334J/N-Auto, ST72314J/N-Auto and ST72124J-Auto devices are members of the ST7 microcontroller family. They can be grouped as follows:
– ST72334J/N-Auto devices are designed for mid range applications with Data EEPROM, ADC, SPI and SCI interface capabilities.
– ST72314J/N-Auto devices target the same range of applications but without Data EEPROM.
– ST72124J-Auto devices are for applications that do not need Data EEPROM and the ADC peripheral.

All devices are based on a common industry standard 8-bit core, featuring an enhanced instruction set.
The ST72C334J/N-Auto, ST72C314J/N-Auto and ST72C124J-Auto versions feature single-voltage Flash memory with byte-by-byte In-Situ Programming (ISP) capability.

■ Memories
   – 8 or 16 Kbyte Program memory (ROM or single voltage Flash) with readout protection and in-situ programming (remote ISP)
   – 256 bytes EEPROM Data memory (with read out protection option in ROM devices)
   – 384 or 512 bytes RAM
■ Clock, Reset and Supply Management
   – Enhanced reset system
   – Enhanced low voltage supply supervisor with 3 programmable levels
   – Clock sources: crystal/ceramic resonator oscillators or RC oscillators, external clock, backup Clock Security System
   – 4 Power Saving Modes: Halt, Active Halt, Wait and Slow
   – Beep and clock-out capabilities
■ Interrupt Management
   – 10 interrupt vectors plus TRAP and RESET
   – 15 external interrupt lines (4 vectors)
■ 44 or 32 I/O Ports
   – 44 or 32 multifunctional bidirectional I/O lines:
   – 21 or 19 alternate function lines
   – 12 or 8 high sink outputs
■ 4 Timers
   – Configurable watchdog timer
   – Real-time base
   – Two 16-bit timers with: 2 input captures (only one on timer A), 2 output compares (only one on timer A), External clock input on timer A, PWM and Pulse generator modes
■ 2 Communications Interfaces
   – SPI synchronous serial interface
   – SCI asynchronous serial interface (LIN compatible)
■ 1 Analog Peripheral
   – 8-bit ADC with 8 input channels (6 only on ST72334Jx, not available on ST72124J2)
■ Instruction Set
   – 8-bit data manipulation
   – 63 basic instructions
   – 17 main addressing modes
   – 8 x 8 unsigned multiply instruction
   – True bit manipulation
■ Development Tools
   – Full hardware/software development package