General Description
The MAX7034 fully integrated low-power CMOS super heterodyne receiver is ideal for receiving amplitude-shift-keyed (ASK) data in the 300MHz to 450MHz frequency range (including the popular 315MHz and 433.92MHz frequencies). The receiver has an RF sensitivity of -114dBm. With few external components and a low-current power down mode, it is ideal for cost-sensitive and power-sensitive applications typical in the automotive and consumer markets. The MAX7034 consists of a low-noise amplifier (LNA), a fully differential image-rejection mixer, an on chip phase-locked loop (PLL) with integrated voltage controlled oscillator (VCO), a 10.7MHz IF limiting amplifier stage with received-signal-strength indicator (RSSI), and analog baseband data-recovery circuitry.
The MAX7034 is available in a 28-pin (9.7mm x 4.4mm) TSSOP package and is specified over the automotive (-40°C to +125°C) temperature range.

Features
● Optimized for 315MHz or 433.92MHz Band
● Operates from Single +3.3V/+5.0V Supply
● Selectable Image-Rejection Center Frequency
● Selectable x64 or x32 fLO/fXTAL Ratio
● Low (< 6.7mA) Operating Supply Current
● < 3.0μA Low-Current Power-Down Mode for Efficient Power Cycling
● 250μs Startup Time
● Built-In 44dB RF Image Rejection
● Excellent Receive Sensitivity Over Temperature
● -40°C to +125°C Operation
● -40°C to +105°C Operation (3.0V to 3.6V Supply)

Applications
● Automotive Remote Keyless Entry
● Security Systems
● Garage Door Openers
● Home Automation
● Remote Controls
● Local Telemetry
● Wireless Sensors