General description
The 74HC4060; 74HCT4060 is a 14-stage ripple-carry counter/divider and oscillator with
three oscillator terminals (RS, RTC and CTC), ten buffered parallel outputs (Q3 to Q9 and
Q11 to Q13) and an overriding asynchronous master reset (MR). The oscillator
configuration allows design of either RC or crystal oscillator circuits. The oscillator may be
replaced by an external clock signal at input RS. In this case, keep the oscillator pins
(RTC and CTC) floating. The counter advances on the HIGH-to-LOW transition of RS. A
HIGH level on MR clears all counter stages and forces all outputs LOW, independent of
the other input conditions. Inputs include clamp diodes. This enables the use of current
limiting resistors to interface inputs to voltages in excess of VCC.
Features and benefits
 All active components on chip
 RC or crystal oscillator configuration
 Complies with JEDEC standard no. 7 A
 Input levels:
 For 74HC4060: CMOS level
 For 74HCT4060: TTL level
 ESD protection:
 HBM JESD22-A114F exceeds 2000 V
 MM JESD22-A115-A exceeds 200 V
 Multiple package options
 Specified from 40 C to +85 C and from 40 C to +125 C
Applications
 Control counters
 Timers
 Frequency dividers
 Time-delay circuits