1 Features
• Independent dual 6-A outputs
• Parallel single 12-A output
• Output voltage range: 0.5 V to 5.5 V
• 0.5-V, ±1% voltage reference accuracy
over temperature range
• Frequency synchronization with phase delay
• Independent enable and power good
for each output
• Start-up into pre-biased output
• UV and OV power good
• Selectable switching frequency options:
500 kHz, 1.0 MHz, 1.5 MHz, and 2.0 MHz
• Meets EN55011 radiated EMI limits
• Operating junction range: –40°C to +125°C
• Operating ambient range: –40°C to +105°C
• 8-mm × 5.5-mm × 1.8-mm standard QFN package
• Create a custom design using the TPSM5D1806
with the WEBENCH® Power Designer

2 Applications
• Semiconductor test and instrumentation
• Medical imaging
• Enterprise switching and storage applications
• Wired network (optical transport)
• Datacom module (optical module)

3 Description
The TPSM5D1806 dual 6-A output power module is
a highly integrated and flexible DC-DC power supply
packaged in a compact 8-mm × 5.5-mm × 1.8-mm,
QFN package. The input voltage range of 4.5 V to
15 V allows conversion from a wide intermediate
bus as well as standard 5-V and 12-V rails. The
two 6-A outputs can be configured independently for
two separate power rails or combined for a single
2-phase, 12-A output.
The low-profile, 51-pin QFN package with optimal
package layout enhances thermal performance. The
package footprint has all signal pins accessible
from the perimeter and large thermal pads beneath
the device for simple layout and easy handling in
manufacturing.
The integrated power design eliminates the loop
compensation and magnetics part selection from
the design process. The device offers independent
enable control and power good signal for each output.
Switching frequency and phase offsetting can be
configured using pin-strapping. The device also offers
overcurrent and thermal shutdown protection.