Description
The product is designed to hold PC boards during all stages of assembly, cleaning and testing.
The width of the rack module is easily adjusted from 0 to 290mm by sliding one side panel along
the aluminium extrusion and tightening 2 screws. One meter lengths of extrusion are available to
allow construction of racks up to 970mm wide. The module is stackable in all directions so that
racks of unlimited height and depth may be constructed.
The plastic sides are anti-static so that sensitive devices may be safely stacked in PCBs without
special precautions other than earthing the rack.
The side panels are made from conductive plastic for use when highly sensitive integrated circuits
need protection against anti-static charges throughout all handling, up to soak test or burn-in.
Maximum operating temperature is +85°C (Softening point +140°C). Volume resistivity 50Ω cm.
Surface resistivity 103Ω.