1 Features
• AEC-Q100 qualified
– Temperature grade 1: –40°C to +125°C
• Gain bandwidth: 50MHz
• Zero-crossover distortion topology:
– CMRR: 115dB (typical)
– Rail-to-rail input and output
• Input 100mV beyond supply rail
• Noise: 4.5nV/√Hz
• Slew rate: 27V/μs
• Fast settling: 0.2μs to 0.01%
• Precision:
– Offset drift: 2.6μV/°C (maximum)
– Input bias current: 20pA (maximum)
• Operating voltage: 2.2V to 5.5V

2 Applications
• HEV/EV DC/DC converter
• HEV/EV inverter and motor control
• HEV/EV onboard charger (OBC) and
wireless charger
• e-Turbo/charger
• Automotive HVAC compressor module
• Gesturing

3 Description
The TLV365-Q1 and TLV2365-Q1 (TLVx365-Q1)
devices are a family of zero-crossover, rail-to-rail input
and output, CMOS operational amplifiers, optimized
for low voltage and cost-sensitive applications.
Low-noise (4.5nV/√Hz) and high-speed operation
(50MHz gain bandwidth) make these devices an
excellent choice for driving sampling analog-to-digital
converters (ADCs) in applications such as low-side
current sensing, audio, signal conditioning, and
sensor amplification.
Special features include an excellent common-mode
rejection ratio (CMRR), no input stage crossover
distortion, high input impedance, and rail-to-rail input
and output swing. The input common-mode range
includes both the negative and positive supplies. The
output voltage swings to within 12mV of the rails.
The TLVx365-Q1 are specified for operation from
−40°C to +125°C.