Features
■ Three-phase gate drivers – High-voltage rail up to 600 V – dV/dt transient immunity ±50 V/ns – Gate driving voltage range from 9 V to 20 V
■ Driver current capability: – 200/350 mA source/sink current @ 25 °C
■ 32-bit ARM® Cortex®-M0+ MCU core: – Up to 64 MHz clock frequency – 8-Kbyte SRAM with hardware parity check – 64-Kbyte flash memory with protection and securable area – CRC calculation unit
■ Up to 32 general-purpose I/O ports (GPIO)
■ 1 advanced timer for motor control, 16-bit with up to 6 x PWM channels
■ 5 general-purpose timers (1x 32-bit)
■ 2 low-power timers
■ 12-bit ADC converter (up to 15 channels) with 2 MSps conversion rate
■ 5-channel DMA controller with flexible mapping
■ Internal high precision voltage reference
■ Full set of interfaces: 2x I2C, 2x SPI, 3x UART and 1x low-power UART
■ Matched propagation delay for all channels
■ Integrated bootstrap diodes
■ Comparator for fast overcurrent protection
■ UVLO, interlocking, and deadtime functions
■ Smart shutdown (smartSD) function
■ Standby mode for low power consumption
■ On-chip debug support via SWD
■ Extended temperature range: -40 to +125 °C
■ QFN 10x10 72L pitch 0.5 creepage 1.8 mm package

Applications
■ Three-phase motor drivers
■ Inverters
■ Industrial appliances and fans QFN 10x10 72L pitch 0.5 Product status link STSPIN32G0601 Product label 600 V three-phase BLDC controller with embedded STM32 MCU STSPIN32G0601 Datasheet DS14489 - Rev 1 - December 2023 For further information contact your local STMicroelectronics sales office.