DESCRIPTION
The MPQ5074 provides up to 3A of load current
(ILOAD) across a 1.2V to 5.5V input voltage (VIN)
range. The low on resistance (RDS(ON)) and tiny
package make the MPQ5074 a highly efficient
and space-saving solution for automotive
infotainment systems, clusters, and advanced
driver-assistance systems (ADAS).
The MPQ5074 employs soft start (SS) to reduce
inrush current during circuit start up. It also
features a configurable soft-start time (tSS),
output discharge, over-current protection (OCP)
and thermal shutdown.
The maximum ILOAD at the output (source) is
current-limited by the sense FET topology. The
current limit (ILIMIT) magnitude is controlled by an
external resistor connected between the ILIM pin
and ground.
An internal charge pump drives the power
device’s gate, allowing for a 10mΩ low-RDS(ON)
DMOS power MOSFET.
The MPQ5074 is available in a tiny QFN-13
(2.5mmx3mm) package.

FEATURES
• Guaranteed Industrial and Automotive
Temperature
• Integrated 10mΩ Low-RDS(ON) MOSFETs
• Adjustable Start-Up Slew Rate
• Wide 1.2V to 5.5V Input Voltage (VIN)
Range
• <1µA Shutdown Current (ISD)
• 3A Configurable Current Limit (ILIMIT) Range
• Output Discharge
• Enable (EN) Pin
• <200ns Short-Circuit Protection (SCP)
Response
• Push-Pull Power Good (PG) Indication
• Thermal Shutdown
• Available in a Small, Space-Saving QFN-13
(2.5mmx3mm) Package
• Available in AEC-Q100 Grade 1

APPLICATIONS
• Automotive Infotainment Systems
• Automotive Clusters
• Automotive Advanced Driver-Assistance
Systems (ADAS)
• Industrial Systems