 DESCRIPTION
The UTC LXXLD70 is a typical LDO with the features of very
low dropout voltage as low as 0.15V at output current 7.0A.
For normal operation, two supply voltages are necessary. One
called control voltage from other equipment can shutdown the
output voltage and it should pull and hold the voltage of EN pin
less than 0.3V. Another one is the main supply voltage whose
purpose is for main power conversion, to keep the power
dissipation low, and to make the dropout voltage lower.
Internally, in the UTC LXXLD70, there’re many functions
which can be seen in the block figure to prevent the IC from being
damaged. Internal Power-On-Reset (POR) circuit can control the
two supply voltages to prevent fault operations of the circuit; the
thermal shutdown circuit is able to protect the device from over
thermal operation, and a current limit function will keep the device
work safely under current over-loads.
The UTC LXXLD70 can be used as an ideal to provide well
supply voltage in the applications, such as front-side-bus
termination on motherboard, NB applications, front side bus VTT
(1.2V/7.0A) and note book PC application

 FEATURES
* Low Dropout VD= 0.15V (typ.) @ IOUT=7.0A
* Low ESR Output Capacitor
* VREF=0.8V
* ±1.5% over Line, Load and Temperature Output Accuracy
* Fast Transient Response
* Output Voltage Adjustable through External Resistors
* POR (Power-On-Reset) controlling VCNTL and VIN
* With internal Soft-Start
* Internal Current Limit Protection
* Internal Under Voltage Protection
* Hysteretic Thermal Shutdown
* With Power-OK Output (with a Delay Time)
* For Standby or Suspend Mode: Shutdown