GENERAL DESCRIPTION
The ADM1067 is a configurable supervisory/sequencing device that offers a single-chip solution for supply monitoring and sequencing in multiple supply systems. In addition to these functions, the ADM1067 integrates six 8-bit voltage output DACs. These circuits can be used to implement an open-loop margining system, which enables supply adjustment by altering either the feedback node or reference of a dc-to-dc converter using the DAC outputs.

FEATURES
   Complete supervisory and sequencing solution for up to
      10 supplies
   10 supply fault detectors enable supervision of supplies to
      <0.5% accuracy at all voltages at 25°C
      <1.0 % accuracy across all voltages and temperatures
   5 selectable input attenuators allow supervision
      Supplies up to 14.4 V on VH
      Supplies up to 6 V on VPn (VP1 to VP4)
   5 dual-function inputs, VXn (VX1 to VX5)
      High impedance input to supply fault detector with
         thresholds between 0.573 V and 1.375 V
      General-purpose logic input
   10 programmable output drivers (PDO1 to PDO10)
      Open collector with external pull-up
      Push/pull output, driven to VDDCAP or VPn
      Open collector with weak pull-up to VDDCAP or VPn
      Internally charge-pumped high drive for use with external
         N-FET (PDO1 to PDO6 only)
   Sequencing engine (SE) implements state machine control of
      PDO outputs
      State changes conditional on input events
      Enables complex control of boards
      Power-up and power-down sequence control
      Fault event handling
      Interrupt generation on warnings
      Watchdog function can be integrated in SE
      Program software control of sequencing through SMBus
   Open-loop margining solution for 6 voltage rails
   6 voltage output 8-bit DACs (0.300 V to 1.551 V) allow
      voltage adjustment via dc-to-dc converter trim/feedback
      node
   Device powered by the highest of VPn, VH for improved
      redundancy
   User EEPROM: 256 bytes
   Industry-standard 2-wire bus interface (SMBus)
   Guaranteed PDO low with VH, VPn = 1.2 V
   Available in 2 packages
      40-lead, 6 mm × 6 mm LFCSP
      48-lead, 7 mm × 7 mm TQFP

APPLICATIONS
   Central office systems
   Servers/routers
   Multivoltage system line cards
   DSP/FPGA supply sequencing
   In-circuit testing of margined supplies