General Description
The DS1882 is a dual, nonvolatile (NV) digital potentiometer designed to operate in audio systems that accomodate up to ±7V signal levels. The potentiometer settings can be stored in EEPROM so that they are retained when the power is cycled. The DS1882 has separate supplies for the potentiometers (VCC) and the communication circuitry (VDD). For clickless/popless operation, a zero-crossing detector allows the wiper position to change when there is no voltage across the potentiometer.

Features
♦ Dual, Audio Log Taper Potentiometers
♦ Low THD+N and Crosstalk
♦ ±7V Analog Supply (Independent of Digital Supply)
♦ 5V Digital Supply
♦ Potentiometer Settings Configurable as Nonvolatile or Volatile
♦ Zero-Crossing Detector Eliminates Switching Noise
♦ Two User-Configurable Attenuation Options
♦ Configuration Option 1: 63 Positions Provide 1dB Attenuation Steps from 0dB to -62dB Plus Mute
♦ Configuration Option 2: (Software-Compatible with the DS1808): 33 Positions Plus Mute as Follows
    Positions 0–12: 1dB per Step for 12 Steps
    Positions 13–24: 2dB per Step for 12 Steps
    Positions 25–32: 3dB per Step for 8 Steps
♦ I2C*-Compatible Serial Interface
♦ Three Address Pins Allow Up to 8 Devices on I2C Bus
♦ 45kΩ Potentiometer End-to-End Resistance
♦ Industrial Temperature Range (-40°C to +85°C)
♦ 16-Pin TSSOP or SO Package

Applications
    Notebook and PC Audio
    Portable Audio Equipment
    Car Stereo
    Consumer Audio/Video