Features ––––––––––––––––––––––––
• Original folded beam contact
The protected, folded beam contact in this connector provides
high contact pressure with an over-stress stop feature. This
ensures dependable continuity when used with low voltage,
low current carrying circuits (dry circuits). The wire crimp
section is mechanically decoupled from the post insertion
section which, in turn, prevents the mating area from being
adversely affected by crimping.
• Box-shaped shrouded header
The four-sided, box-shaped shroud prevents the receptacle
from being misinserted or pried during insertion and removal.
The shroud also prevents foreign matter from reaching the
posts and resists contact deformation due to handling and
shipping. Furthermore, a serrated, oversized square post is
pressure-fit into each square hole to completely protect the
post against heat and to prevent flux from entering during dip
soldering.
• Header with a boss
This header has a boss (projection) on the bottom of the
housing to prevent improper insertion in printed circuit boards.
• Interchangeability
This header is interchangeable with those of 2.5mm (.098")
pitch insulation displacement NR and NRD connectors and
board-to-board JQ connectors.
• Conforming to the HA terminal
The 4-circuit XH connector conforms to the HA terminal
specified in JEM 1427 (Japanese Electric Machine Industry
Association Standards).