Features
 USB 2.0 Hi-Speed compatible
 Reduced development time
 Rapid integration into existing systems
 USB powered – no external power supply needed
 Based on the USB Hi-Speed FT930Q device
 Entire USB protocol handled by D2xx hardware engine
 USB micro-B connector common on many commercial devices
 On-board 500mA 3.3V LDO regulator, 12MHz crystal, 32kHz crystal.
 Asynchronous Serial data transfer rates from 300 baud to 12 Mbaud at TTL levels
 One SPI master supports single / dual / quad modes of data transfer. Clock rate is up to 25 MHz
 One SPI slave support single data transfer with 25MHz clock
 I2C bus interface can be configured as master or slave, with data transfers up to 3.4Mbps
 Support for USB suspend and resume
 UHCI / OHCI / EHCI host controller compatible
 -40°C to +85°C operating temperature range