FEATURES
• Easy mounting using ring tongue terminal
• Rugged construction
• Cable of PTFE insulation according to
NEMA HP-3, type E, rated 600 VRMS (1)
• AEC-Q200 qualified (grade 1)
• cULus recognized, file E148885
(UL category XGPU2/XGPU8)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
(1) Formerly MIL-W-16878/4, type E, cable test voltage 3.4 kV

APPLICATIONS
Suitable for surface sensing applications, especially when a
good electrical insulation and a good thermal contact with
the chassis is required.

DESCRIPTION
A NTC thermistor chip is soldered to AWG#24 stranded
silver plated copper leads with PTFE insulation and
insulated with epoxy coating. The insulated sensor is
attached to a tin plated copper ring lug. The lead wires are
stripped.

PACKAGING
The thermistors are packed in cardboard boxes.

CAUTIONS AND WARNINGS ON MOUNTING
AND HANDLING
Please read the special instructions:
see www.vishay.com/doc?29221
• By means of M6 (stud #1/4) screw. Leads to be soldered
or crimped
• The device is suitable for screwing e.g. on metal surface
• The leads are suitable for soldering e.g. on PCB

DESIGN-IN SUPPORT
• Other resistance curves and tolerances are available on
request
• Consult Vishay for other lead length, other connector
crimping, or other features
https://info.vishay.com/vishay-ntc-modification-request
• 3D solid models: www.vishay.com/doc?29200
• NTC curve computation:
www.vishay.com/thermistors/ntc-rt-calculator/