Features
• AEC-Q100 grade 1 qualified
– Operating temperature range: -40 °C < TJ < +150 °C
• 8 constant current output channels controlled by four switch inputs
• Output enable input for global dimming
• Output current: from 5 mA to 100 mA
• Current programmable through external resistor
• Supply voltage: 3 V to 5.5 V
• Thermal shutdown
• 19 V current generator rated voltage
• Available in high thermal efficiency HTSSOP exposed pad package

Description
The ALED8102S is a monolithic, low voltage, 8 low-side channels LED driver.
The ALED8102S guarantees up to 19 V output driving capability allowing users to
connect several LEDs in series. In the output stage, 8 regulated current sources
provide from 5 mA to 100 mA constant current to drive the LEDs. Current is
programmed through a single external resistor.
The ALED8102S is equipped with a thermal management that protects the device
forcing it in shutdown (typically: power-off at 170 °C with 15 °C hysteresis to restart).
The thermal protection switches OFF the output channels only.
The operative supply voltage range is between 3 V and 5.5 V. The output control
is provided by four switch inputs, providing an on/off toggle action suitable also for
local dimming. Moreover, on all active output LEDs brightness can be adjusted with a
global PWM signal applied to the output enable pin (OE). Outputs can be connected
in parallel, or left unconnected if not used, as required by the application.

• Automotive LED interior and exterior lighting
– Clusters
– LCD back-light
– Ambient light
– Dome light
– Rear combination light