Eval-M1-CM610N3 is an evaluation board formotor drive applications based on a 3-phase IPM. Combined in a
kit with one of the available MADK control board options, it demonstrates Infineon's IPM technology formotor
drives. The kit demonstrates Infineon’s IPM technology formotor drives.
Main features of CIPOS™ Mini IPM IKCM10H60GA are:
• TRENCHSTOP™ IGBTs
• Maximum blocking voltage VCES= 600V
• Maximum output current at 25°C case temperature IC= 10A
• Fully isolated Dual In-Linemoldedmodule
• Rugged SOI gate driver technology with stability against transient and negative voltages
• Negative potential allowed up to VS = -11V for signal transmission at VBS= 15V
• Integrated bootstrap functionality
• Overcurrent shutdown
• Temperaturemonitoring
• Undervoltage lockout at all channels
• Low side emitter pins accessible for phase currentmonitoring in open emitter configuration
• Cross conduction prevention
• All six switches turn off during protection
• Lead-free terminal plating; RoHS compliant
The evaluation board characteristics are:
• Nominal input voltage 220 VAC
• Maximum 750 Wmotor power output
• On board EMI filter
• Current sensing for each phase configured by default
• Overcurrent protection
• Overtemperature hardware protection
• Sensing of DC-link voltage
• Thermistor output
• Fault diagnostic output
• Measurement test-points compatible to standard oscilloscope probes
• PCB is 120mmx 120mmand has two layers with 35 μmcopper each
• RoHS complaint