Description
The UCS... universal electronics housings consist of two
housing half-shells, which can be combined with side walls
in two different heights. The housing half-shells are available
in four sizes and several colors.
– Four housing sizes:
125 x 87 mm
145 x 125 mm
195 x 145 mm
237 x 195 mm
– Two housing heights: 47 mm or 67 mm
– Colors: light gray (similar to RAL 7035) or deep black
(similar to RAL 9005). The fastening elements are
RAL 5018 (turquoise blue)
The housings have special corner inlays, to which a PCB
can be attached. It is also possible to attach the PCBs with
adhesive domes. The adhesive domes are attached to the
housing half-shells. The PCB is screwed onto the adhesive
domes. This allows several PCBs to be added to the housings.
We can also provide you with templates for positioning
the adhesive domes. The housing half-shells are also available
with customer-specific adhesive domes.
Complete housings are available for certain PCBs with a
form factor (e.g., ETX, ITX, DTX, EBX, EPIC). Corner inlays
with domes or adhesive domes are available for attaching
the PCB. In addition to the above PCB format, further PCBs
can be installed in the complete housings depending on the
size. The template layouts for the adhesive domes are available
for download with the products.
Connection systems and display and operating elements
can be installed in the housings. We would be glad to install
the required openings for you.