GENERAL DESCRIPTION
The ADGM1001 is a wideband, single-pole, two-throw (SP2T)
switch, fabricated using Analog Devices, Inc., micro-electromechanical
system (MEMS) switch technology. This technology enables a
small form factor, wide RF bandwidth, highly linear, low insertion
loss switch that is operational down to 0 Hz/dc, making it an ideal
solution for a wide range of RF and precision equipment switching
needs. The device is packaged in a 24-lead, 5.00 mm × 4.00 mm ×
0.90 mm, land grid array (LGA) package.
An integrated control chip generates the high voltage necessary to
electrostatically actuate the switch via a complementary metal-oxide
semiconductor (CMOS)-/low voltage transistor-transistor logic
(LVTTL)-compatible parallel interface. All switches are independently
controllable.
Multifunction pin names may be referenced by their relevant function only.

FEATURES
► ADGM1001: DC to 34 GHz
► ADGM1002: DC to 20 GHz
► ADGM1003: DC to 16 GHz
► Insertion loss (ADGM1001)
► 0.8 dB (typical) at 18 GHz
► 1.5 dB (typical) at 34 GHz
► IIP3: 76 dBm (typical) (ADGM1001)
► Maximum RF power: 33 dBm (ADGM1001)
► On resistance: 3.4 Ω (typical)
► Maximum dc current: 200 mA (ADGM1001)
► Actuation lifetime: 100 million cycles (minimum)
► On switching time (tON): 200 μs (typical)
► Integrated 3.3 V driver for simple control with parallel and SPI
► Independently controllable switches
► Space-saving integrated passive components
► Small, 5.00 mm × 4.00 mm × 0.90 mm, 24-lead LGA package
► Temperature range: –40°C to +85°C

APPLICATIONS
► ATE load and probe boards
► DC and high speed loop back testing
► Relay replacements
► Reconfigurable filters and attenuators
► Military and microwave radios
► Cellular infrastructure: 5G mmWave
► Supports digital standards: PCIe Gen4/Gen5/Gen6, USB 3 and USB 4, and PAM 4