General Description

The Am29LV800D is an 8 Mbit, 3.0 volt-only Flash memory organized as 1,048,576 bytes or 524,288 words. The device is offered in 48-ball FBGA, 44-pin SO, and 48-pin TSOP packages. For more information, refer to publication number 21536. The word-wide data (x16) appears on DQ15–DQ0; the byte-wide (x8) data appears on DQ7–DQ0. This device requires only a single, 3.0 volt VCC supply to perform read, program, and erase operations. A standard EPROM programmer can also be used to program and erase the device.

Distinctive Characteristics

■ Single power supply operation

  — 2.7 to 3.6 volt read and write operations for battery-powered applications

■ Manufactured on 0.23 µm process technology

  — Compatible with 0.32 µm Am29LV800 device

■ High performance

  — Access times as fast as 70 ns

■ Ultra low power consumption (typical values at 5 MHz)

  — 200 nA Automatic Sleep mode current

  — 200 nA standby mode current

  — 7 mA read current

  — 15 mA program/erase current

■ Flexible sector architecture

  — One 16 Kbyte, two 8 Kbyte, one 32 Kbyte, and fifteen 64 Kbyte sectors (byte mode)

  — One 8 Kword, two 4 Kword, one 16 Kword, and fifteen 32 Kword sectors (word mode)

  — Supports full chip erase

  — Sector Protection features:

    A hardware method of locking a sector to prevent any program or erase operations within that sector

    Sectors can be locked in-system or via programming equipment

    Temporary Sector Unprotect feature allows code changes in previously locked sectors

■ Unlock Bypass Program Command

  — Reduces overall programming time when issuing multiple program command sequences

■ Top or bottom boot block configurations available

■ Embedded Algorithms

  — Embedded Erase algorithm automatically preprograms and erases the entire chip or any combination of designated sectors

  — Embedded Program algorithm automatically writes and verifies data at specified addresses

■ Minimum 1 million write cycle guarantee per sector

■ 20-year data retention at 125°C

  — Reliable operation for the life of the system

■ Package option

  — 48-ball FBGA

  — 48-pin TSOP

  — 44-pin SO

■ Compatibility with JEDEC standards

  — Pinout and software compatible with single power supply Flash

  — Superior inadvertent write protection

■ Data# Polling and toggle bits

  — Provides a software method of detecting program or erase operation completion

■ Ready/Busy# pin (RY/BY#)

  — Provides a hardware method of detecting program or erase cycle completion

■ Erase Suspend/Erase Resume

  — Suspends an erase operation to read data from, or program data to, a sector that is not being erased, then resumes the erase operation

■ Hardware reset pin (RESET#)

— Hardware method to reset the device to reading array data