Description
The PI90LV02 and PI90LVT02 are single differential line receivers that use low-voltage differential signaling (LVDS) to support data rates up to 400 Mbps. These products are designed for applications requiring high-speed, low-power consumption, low-noise generation, and a small package.
A differential input signal (350mV) is translated by the device to a 3.3V CMOS output level. The PI90LVT02 integrates the terminating resistor while the PI90LV02 requires an external resistor.

Features
• Meets or Exceeds the Requirements of ANSI TIA/EIA-644-1995 Standard
• Signaling rates up to 400 Mbps
• Interfaces to LVDS, LVPECL
• Bus-Terminal ESD exceeds 10kV
• Differential Input Voltage Threshold less than 100mV
• Typical Propagation Delay Times of 2.6ns
• Typical Power Dissipation of 40mW @200 MHz
• Low Voltage TTL (LVTTL) Level is 5V Tolerant
• Open-Circuit Fail Safe
• Output are High Impedance with VCC <1.5V
• Integrated 110-ohm Line Termination Resistor (PI90LVT02)
• Operates from a 3.3V supply
• Input common-mode voltage range 0V–3.2V
• Industrial Temperature Operating Range: –40°C to 85°C
• Packaging (Pb-free & Green available):
    - 5-pin space-saving SOT-23 (T)